Sign In  |  Register  |  About Livermore  |  Contact Us

Livermore, CA
September 01, 2020 1:25pm
7-Day Forecast | Traffic
  • Search Hotels in Livermore

  • CHECK-IN:
  • CHECK-OUT:
  • ROOMS:

Desktop Metal to Showcase New Breakthroughs in Production Metal and Ceramic Binder Jet 3D Printing at RAPID + TCT

  • More than 24 customer applications 3D printed in metal and ceramics, including aluminum, titanium, copper, platinum, and silicon carbide, to be on display
  • The all-new PureSinter Furnace – a high purity, high efficiency, and high reliability sintering furnace – will make its global debut
  • Aluminum parts binder jet 3D printed on an X25Pro production metal binder jet system in partnership with both Eaton, an intelligent power management company with six Desktop Metal printers, and BEGA, a global leader in fine architectural outdoor and indoor lighting, to be on display
  • Desktop Metal will be featured along the main promenade at RAPID + TCT, North America’s largest additive manufacturing and industrial 3D printing event, to be held June 25-27 at the Los Angeles Convention Center

Desktop Metal (NYSE: DM), a global leader in Additive Manufacturing 2.0 technologies for mass production, today announced it will showcase new customer 3D printing applications at RAPID + TCT in Los Angeles – including high-value applications in the aerospace, electronics, medical, and consumer goods industries.

This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20240624914086/en/

Among the 24 customer part displays Desktop Metal will show at RAPID + TCT in Los Angeles this week, a variety of IN718 jet engine turbine blades will be featured. The blades, as shown here, were binder jet 3D printed on the Shop System and sintered in the all-new PureSinter Furnace that will make its global debut at the show. (Graphic: Business Wire)

Among the 24 customer part displays Desktop Metal will show at RAPID + TCT in Los Angeles this week, a variety of IN718 jet engine turbine blades will be featured. The blades, as shown here, were binder jet 3D printed on the Shop System and sintered in the all-new PureSinter Furnace that will make its global debut at the show. (Graphic: Business Wire)

Desktop Metal is the market leader in binder jetting and sinter-based AM for production, with more than 1,350 systems now installed worldwide. DM systems are now qualified to 3D print more than 40 materials.

A highlight of the booth will be new milestones achieved with binder jetting of AL6061 powder with final part performance that rivals traditional investment casting and surpasses other areas of AM for this material.

“We have always faced challenges when printing wrought alloy aluminum materials, such as 6061, using powder bed fusion technologies. However, the work done by Desktop Metal in advancing the printing of wrought alloys has expanded our material options, better aligning with our designers’ preferences,” said Eric Johnson, Ph.D., Senior Manager — Additive Manufacturing, at Eaton Research Labs. “Additionally, we’ve overcome the typical size limitations associated with binder jetting. This breakthrough opens up numerous applications for this technology within our business.”

Other highlights of critical applications to be on display include binder jet 3D printed:

  • Silicon Carbide Optical Mirrors — a high-value aerospace application now being produced by customers in the United States and Europe on the X25Pro and X160Pro after development on the InnoventX. SiC mirrors are used in ground and space telescopes and spacecraft for imaging, laser targeting, and communications.
  • High-Requirement SiC Components — including a turbine blade, lattice gear, cutting tool and more, produced on an InnoventX in France by customer Norimat. After printing, Norimat uses its Spark Plasma Sintering (SPS) technique to densify parts.
  • Copper Lead Frame — a high-value application used in semiconductor fabrication, a lead frame is a complex metal structure inside a chip package. The part to be shown was binder jet 3D printed as part of a project with Texas Instruments, the University of Texas at Dallas, and DM on a Production System P-1. Details of the project were presented earlier this year at the IMAPS Device Packaging Conference.
  • IN718 Turbine Blades — a variety of large and small jet engine turbine blades printed on a Shop System and sintered in the all-new PureSinter Furnace demonstrate the ability to successfully binder jet and sinter larger parts printed in nickel-based alloys.
  • M2 Tooling for Metal Injection Molding — produced on an X25Pro by Indo-MIM, the global leader and largest supplier of Metal Injection Molding (MIM) precision-engineered products. Indo-MIM owns a Super Fleet of five different DM metal printers.
  • Surgical Tools – printed on a Production System P-1. This showcase includes a Ti64 cervical fusion cage printed by Tritech Titanium Parts, an experienced Detroit-based manufacturer of titanium parts, and a 316L acetabular hip reamer printed by FreeForm Technologies, a metal binder jet contract manufacturer based in St. Marys, Pennsylvania, and the largest owner of a Super Fleet of 24 Desktop Metal 3D printers.
  • Full Set of Golf Irons — a full set of fully functional golf irons that showcase special design features, such as lightweighting and strategic areas of stiffness, will be shown.
  • Fine Jewelry in a Variety of Metals — including rings, necklaces, earrings, and charms 3D printed in platinum, gold, sterling silver, stainless steel, and steel i420 composite. Platinum was recently qualified on the Production System P-1 by Italy-based Legor, a leader in metals science and production of best-in-class alloys, powders, and plating solutions, for the jewelry and fashion hardware, and accessories markets.

In all, more than 24 customer parts will be on display, alongside the all-new PureSinter Furnace, as well as a Studio System bound metal deposition (BMD) printer and three entry-level binder jet 3D printers, including a Shop System, Production System P-1, and InnoventX.

For more information, visit TeamDM.com/VirtualBooth.

About Desktop Metal

Desktop Metal (NYSE:DM) is driving Additive Manufacturing 2.0, a new era of on-demand, digital mass production of industrial, medical, and consumer products. Our innovative 3D printers, materials, and software deliver the speed, cost, and part quality required for this transformation. We’re the original inventors and world leaders of the 3D printing methods we believe will empower this shift, binder jetting and digital light processing. Today, our systems print metal, polymer, sand and other ceramics, as well as foam and recycled wood. Manufacturers use our technology worldwide to save time and money, reduce waste, increase flexibility, and produce designs that solve the world’s toughest problems and enable once-impossible innovations. Learn more about Desktop Metal and our #TeamDM brands at www.desktopmetal.com.

Forward-looking Statements

This press release contains forward-looking statements within the meaning of the federal securities laws. All statements other than statements of historical facts contained in these communications, including statements regarding Desktop Metal’s future results of operations and financial position, financial targets, business strategy, and plans and objectives for future operations, are forward-looking statements. Forward-looking statements generally are identified by the words “believe,” “project,” “expect,” “anticipate,” “estimate,” “intend,” “strategy,” “future,” “opportunity,” “plan,” “may,” “should,” “will,” “would,” “will be,” “will continue,” “will likely result,” and similar expressions. Forward-looking statements are predictions, projections and other statements about future events that are based on current expectations and assumptions and, as a result, are subject to risks and uncertainties. Many factors could cause actual future events to differ materially from the forward-looking statements in this document, including but not limited to: risks associated with the integration of the business and operations of acquired businesses; Desktop Metals’ ability to realize the benefits from cost saving measures; supply and logistics disruptions, including shortages and delays. For more information about risks and uncertainties that may impact Desktop Metal’s business, financial condition, results of operations and prospects generally, please refer to Desktop Metal’s reports filed with the SEC, including without limitation the “Risk Factors” and/or other information included in the Form 10-Q filed with the SEC on August 3, 2023, and such other reports as Desktop Metal has filed or may file with the SEC from time to time. These filings identify and address other important risks and uncertainties that could cause actual events and results to differ materially from those contained in the forward-looking statements. Forward-looking statements speak only as of the date they are made. Readers are cautioned not to put undue reliance on forward-looking statements, and Desktop Metal, Inc. assumes no obligation and does not intend to update or revise these forward-looking statements, whether as a result of new information, future events, or otherwise.

Contacts

Data & News supplied by www.cloudquote.io
Stock quotes supplied by Barchart
Quotes delayed at least 20 minutes.
By accessing this page, you agree to the following
Privacy Policy and Terms and Conditions.
 
 
Copyright © 2010-2020 Livermore.com & California Media Partners, LLC. All rights reserved.