UNITED STATES SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

FORM 10-K

(Mark One)

þ		Annual report pursuant to Section 13 or 15(d) of the securities exchange act of 1934

o		Transition report pursuant to section 13 or 15(d) of the securities exchange act of 1934

Commission File Number 001-31225

 

ENPRO INDUSTRIES, INC.

(Exact name of registrant, as specified in its charter)

North Carolina (State or other jurisdiction of incorporation)		01-0573945 (I.R.S. employer identification no.)

5605 Carnegie Boulevard, Suite 500, Charlotte, North Carolina (Address of principal executive offices)		28209 (Zip code)

(704) 731-1500
(Registrant’s telephone number, including area code)

		Name of each exchange
Title of each class		on which registered
Common stock, $0.01 par value		New York Stock Exchange
Preferred stock purchase rights		New York Stock Exchange

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.

Yes o                      No þ

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.

Yes o                      No þ

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.

Yes þ                      No o

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of the registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. þ

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

Large accelerated filer o		Accelerated filer þ		Non-accelerated filer o (Do not check if a smaller reporting company)		Smaller reporting company o

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).

Yes o                      No þ

The aggregate market value of voting and nonvoting common stock of the registrant held by non-affiliates of the registrant as of June 30, 2009 was $354,767,446. As of March 1, 2010, there were 20,296,467 shares of common stock of the registrant outstanding.

Portions of the registrant’s definitive proxy statement for the 2010 annual meeting of shareholders are incorporated by reference into Part III.

 

 

TABLE OF CONTENTS

Page

		PART I
Item 1		Business			1
Item 1A		Risk Factors			7
Item 1B		Unresolved Staff Comments			15
Item 2		Properties			15
Item 3		Legal Proceedings			15
Item 4		Submission of Matters to a Vote of Security Holders			16
		Executive Officers of the Registrant			16
		PART II
Item 5		Market for Registrant’s Common Equity, Related Shareholder Matters and Issuer Purchases of Equity Securities			18
Item 6		Selected Consolidated Financial Data			19
Item 7		Management’s Discussion and Analysis of Financial Condition and Results of Operations			20
Item 7A		Quantitative and Qualitative Disclosures About Market Risk			40
Item 8		Financial Statements and Supplementary Data			41
Item 9		Changes In and Disagreements with Accountants on Accounting and Financial Disclosure			42
Item 9A		Controls and Procedures			42
Item 9B		Other Information			43
		PART III
Item 10		Directors, Executive Officers and Corporate Governance			44
Item 11		Executive Compensation			44
Item 12		Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters			45
Item 13		Certain Relationships and Related Transactions, and Director Independence			45
Item 14		Principal Accountant Fees and Services			46
		PART IV
Item 15		Exhibits and Financial Statement Schedules			46
		Signatures			47
		Exhibit Index			48
		Report of Independent Registered Public Accounting Firm			53
		Consolidated Statements of Operations			55
		Consolidated Statements of Cash Flows			56
		Consolidated Balance Sheets			58
		Consolidated Statements of Changes in Shareholders’ Equity			59
		Notes to Consolidated Financial Statements			60
		Schedule II — Valuation and Qualifying Accounts			102
EX-10.9
EX-10.11
EX-10.21
EX-10.22
EX-10.32
EX-21
EX-23.1
EX-23.2
EX-24.1
EX-24.2
EX-24.3
EX-24.4
EX-24.5
EX-24.6
EX-24.7
EX-24.8
EX-31.1
EX-31.2
EX-32

ENPRO INDUSTRIES, INC.

PART I

ITEM 1.		BUSINESS

     As used in this report, the terms “we,” “us,” “our,” “EnPro” and “Company” mean EnPro Industries, Inc. and its subsidiaries (unless the context indicates another meaning). The term “common stock” means the common stock of EnPro Industries, Inc., par value $0.01 per share. The terms “convertible debentures” and “debentures” mean the 3.9375% Convertible Senior Debentures due 2015 issued by the Company in October 2005.

Background

     We were incorporated under the laws of the State of North Carolina on January 11, 2002, as a wholly owned subsidiary of Goodrich Corporation (“Goodrich”). The incorporation was in anticipation of Goodrich’s announced distribution of its Engineered Industrial Products segment to existing Goodrich shareholders. The distribution took place on May 31, 2002 (the “Distribution”). We are a leader in the design, development, manufacturing, and marketing of proprietary engineered industrial products. We have 44 primary manufacturing facilities located in the United States and 10 other countries.

     Our sales by geographic region in 2009, 2008 and 2007 were as follows:

		2009				2008				2007
		(in millions)
United States		$	421.0			$	474.2			$	441.6
Europe			224.7				329.3				277.4
Other			157.3				190.3				154.8
Total		$	803.0			$	993.8			$	873.8

     We maintain an Internet website at www.enproindustries.com. We will make this annual report, in addition to our other annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to these reports, available free of charge on our website as soon as reasonably practicable after we electronically file such material with, or furnish it to, the Securities and Exchange Commission. Our Corporate Governance Guidelines and the charters for each of our Board Committees (Audit and Risk Management, Compensation and Human Resources, Executive, and Nominating and Corporate Governance committees) are also available on our website, and copies of this information are available in print to any shareholder who requests it. Information included on or linked to our website is not incorporated by reference into this annual report.

Acquisitions and Dispositions in 2009

     In December 2009, we signed a definitive agreement to sell our Quincy Compressor business to Atlas Copco for approximately $190 million in cash. The transaction closed in the first quarter of 2010. Accordingly, the Quincy Compressor business is presented as a discontinued operation and is not described herein. Additional information regarding the sale of the Quincy Compressor business is included in Item 9B and Note 18 of this annual report.

     In February 2009, we purchased PTM (UK) Limited, a privately-owned manufacturer and distributor of sealing products with two locations in the United Kingdom. The acquisition of PTM

continued the expansion of Garlock’s presence in the U.K., increasing the scale of the U.K. sealing products business and the ability to address new market segments. PTM is included in our Sealing Products segment.

     In August and September 2009, we purchased USA Parts & Service, LLC, a privately-owned parts supplier for natural gas compressors located in Gillette, Wyoming, and Player & Cornish P.E.T. Limited, a privately-owned manufacturer of aftermarket components for compressors based in the United Kingdom. These businesses are managed as part of the CPI division in the Engineered Products segment.

     In December 2009, we purchased Technetics Corporation, a leading manufacturer of abradable seals, brush seals and acoustic products for turbines used in aerospace and power generation applications. Technetics is located in Deland, Florida. The acquisition of Technetics provides Garlock with a unique line of metal sealing products that is expected to accelerate expansion in aerospace markets and broaden the line of products offered for land-based turbines. Technetics is included in our Sealing Products segment.

Operations

     We manage our business as three segments: a Sealing Products segment, which includes our sealing products, heavy-duty wheel end components, polytetrafluoroethylene (“PTFE”) products, and rubber products; an Engineered Products segment, which includes our bearings, aluminum blocks for hydraulic applications and reciprocating compressor components; and an Engine Products and Services segment, which manufactures, sells and services heavy-duty, medium-speed diesel, natural gas and dual fuel reciprocating engines. For financial information with respect to our business segments, see Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations — Results of Operations,” and Note 16 to our Consolidated Financial Statements. Item 7 and Note 16 contain information about sales and profits for each segment, and Note 16 contains information about each segment’s assets.

Sealing Products Segment

     Overview. Our Sealing Products segment designs, manufactures and sells sealing products, including metallic, non-metallic and composite material gaskets, rotary seals, compression packing, resilient metal seals, elastomeric seals, hydraulic components and expansion joints, as well as heavy-duty wheel-end components and component systems, PTFE products, conveyor belting and sheeted rubber products. These products are used in a variety of industries, including chemical and petrochemical processing, petroleum extraction and refining, pulp and paper processing, heavy-duty trucking, power generation, food and pharmaceutical processing, primary metal manufacturing, mining, water and waste treatment, aerospace, medical, filtration and semiconductor fabrication. In many of these industries, performance and durability are vital for safety and environmental protection. Many of our products are used in applications that are highly demanding, e.g., where extreme temperatures, extreme pressures, corrosive environments and/or worn equipment make sealing difficult.

     Products. Our Sealing Products segment includes the product lines described below, which are designed, manufactured and sold by our Garlock Sealing Technologies, Stemco, and Plastomer Technologies operations.

     Gasket products are used for sealing flange joints in chemical, petrochemical and pulp and paper processing facilities where high pressures, high temperatures and corrosive chemicals create the need for specialized and highly engineered sealing products. We sell these gasket products under the Garlock^®, Gylon^®, Blue-Gard^®, Stress-Saver^®, Edge^®, Graphonic^® and Flexseal^® brand names. These products have a long-standing reputation within the industries we serve for performance and reliability.

     Rotary seals are used in rotating applications to contain the lubricants that protect the bearings from excessive friction and heat generation. Because these sealing products are utilized in dynamic applications, they are subject to wear. Durability, performance, and reliability are, therefore, critical requirements of our customers. These rotary seals are used in demanding applications in the steel industry, mining and pulp and paper processing under well-known brand names including Klozure^® and Model 64^®.

     Compression packing is used to provide sealing in pressurized, static and dynamic applications such as pumps and valves. Major markets for compression packing products are the pulp and paper, mining, petrochemical and hydrocarbon processing industries. Branded products for these markets include EVSP™, Synthepak^® and Graph-lock^®.

     Resilient metal seals provide extremely tight sealing performance for highly demanding applications such as nuclear power generation, semiconductor fabrication facilities, specific chemical processing applications and race car engines. Branded products for these markets include Helicoflex^®, Ultraflex^® and Feltmetal^®.

     Critical service flange gaskets, seals and electrical flange isolation kits are used in high-pressure wellhead equipment, flow lines, water injection lines, sour hydrocarbon process applications and crude oil and natural gas pipeline/transmission line applications. These products are sold under the brand names Pikotek^®, VCS™, Flowlok™ and PGE™.

     Our rubber products business manufactures rubber bearing pads, conveyor belts and other rubber products for industrial applications under the DuraKing^®, FlexKing^®, Vibon™, Techflex™ and HeatKing™ brand names.

     Stemco manufactures a variety of high performance wheel-end, steering, suspension and braking components used by the heavy-duty trucking industry to improve the performance and longevity of commercial tractors and trailers. Products for this market include hub oil seals, axle fasteners, hub caps, wheel bearings, mileage counters, king pin kits, suspension kits, brake friction, foundation brake parts and automatic brake adjusters. We sell these sealing products under the Stemco^®, Stemco Kaiser^®, Grit Guard^®, Guardian^®, Guardian HP^®, Voyager^®, Discover^®, Endeavor™, Pro-Torq^®, Sentinel^®, DataTrac^®, Qwikkit™, Pluskit™, Econokit™, Stemco Duroline™ and Stemco Crewson™ brand names. We also sell products under our RFID sensor-based BAT RF^® product line.

     Plastomer Technologies manufactures PTFE specialty tape, formed PTFE products, and PTFE sheets and shapes. These PTFE products provide highly specialized and engineered solutions to our customers in the aircraft, fluid handling and semiconductor industries, and are sold under the Plastolon^®, Texolon™ and Amicon™ brand names.

     Customers. Our Sealing Products segment sells products to industrial agents and distributors, original equipment manufacturers (“OEMs”), engineering and construction firms and end users worldwide. Sealing products are offered to global customers, with approximately 46% of sales delivered to customers outside the United States in 2009. Representative customers include Saudi Aramco, Motion Industries, Applied Industrial Technologies, Electricite de France, AREVA, Bayer, BASF Corporation, Chevron, General Electric Company, Georgia-Pacific Corporation, Eastman Chemical Company, Exxon Mobil Corporation, Minara Resources, Queensland Alumina, AK Steel Corporation, Volvo Corporation, Utility Trailer, Great Dane, Mack Trucks, International Truck, PACCAR, ConMet and Applied Materials. In 2009, no single customer accounted for more than 2% of segment revenues.

     Competition. Competition in the sealing markets in which we operate is based on proven product performance and reliability, as well as price, customer service, application expertise, delivery terms,

breadth of product offering, reputation for quality and the availability of product. Our leading brand names, including Garlock^® and Stemco^®, have been built upon long-standing reputations for reliability and durability. In addition, the breadth, performance and quality of our product offerings allow us to achieve premium pricing and have made us a preferred supplier among our agents and distributors. We believe that our record of product performance in the major markets in which this segment operates is a significant competitive advantage for us. Major competitors include A.W. Chesterton Company, Klinger Group, Teadit, Lamons, SIEM/Flexitallic, SKF USA Inc., Freudenberg-NOK, Federal-Mogul Corporation and Saint-Gobain.

     Raw Materials and Components. Our Sealing Products segment uses PTFE resins, aramid fibers, specialty elastomers, elastomeric compounds, graphite and carbon, common and exotic metals, cold-rolled steel, leather, aluminum die castings, nitrile rubber, powdered metal components, and various fibers and resins. We believe that all of these raw materials and components are readily available from various suppliers.

Engineered Products Segment

     Overview. Our Engineered Products segment includes operations that design, manufacture and sell self-lubricating, non-rolling bearing products, aluminum blocks for hydraulic applications, and compressor components.

     Products. Our Engineered Products segment includes the product lines described below, which are designed, manufactured and sold by our GGB and Compressor Products International businesses.

     GGB produces self-lubricating, non-rolling, metal polymer, solid polymer and filament wound bearing products. The metal-backed or epoxy-backed bearing surfaces are made of PTFE or a mixture that includes PTFE to provide maintenance-free performance and reduced friction. These products typically perform as sleeve bearings or thrust washers under conditions of no lubrication, minimal lubrication or pre-lubrication. These products are used in a wide variety of markets such as the automotive, pump and compressor, construction, power generation and machine tool markets. We have over 20,000 bearing part numbers of different designs and physical dimensions. GGB is a leading and well recognized brand name and sells products under the DU^®, DP^®, DX^®, DS™, HX™, EP™, SY™, SP™, SZ™ and LD™ names.

     Compressor Products International designs, manufactures and services components for reciprocating compressors and engines. These components (packing and wiper assemblies and rings, piston and rider rings, compressor valve assemblies and components) are primarily utilized in the refining, petrochemical, natural gas gathering, storage and transmission, and general industrial markets. Brand names for our products include Hi-Flo™, Valvealert™, Mentor™, Triple Circle™, CPI Special Polymer Alloys™, Twin Ring™ and Liard™. Compressor Products International also designs and manufactures the Gar-Seal^® family of PTFE lined butterfly valves.

     Customers. Our Engineered Products segment sells its products to a diverse customer base using a combination of direct sales and independent distribution networks. GGB has customers worldwide in all major industrial sectors, and supplies products both directly to customers through GGB’s own local distribution system and indirectly to the market through independent agents and distributors with their own local networks. Compressor Products International sells its products globally through a network of company salespersons, independent sales representatives and distributors. In 2009, no single customer accounted for more than 3% of segment revenues.

     Competition. GGB has a number of competitors, including Kolbenschmidt Pierburg AG, Norton Company and Federal-Mogul Corporation. In the markets in which GGB competes, competition is based

primarily on performance of the product for specific applications, product reliability, delivery and price. Compressor Products International competes against other component manufacturers, such as Cook Compression, Hoerbiger Corporation and numerous smaller component manufacturers worldwide. Price, availability, product quality, engineering support and reliability are the primary competitive drivers in the markets served by Compressor Products International.

     Raw Materials and Components. GGB’s major raw material purchases include steel coil, bronze powder and PTFE. GGB sources components from a number of external suppliers. Compressor Products International’s major raw material purchases include PTFE, PEEK (Polyetheretherketone), compound additives, cast iron, bronze, steel and stainless steel bar stock. We believe that all of these raw materials and components are readily available from various suppliers.

Engine Products and Services Segment

     Overview. Our Engine Products and Services segment designs, manufactures, sells and services heavy-duty, medium-speed diesel, natural gas and dual fuel reciprocating engines. We market our products and services under the Fairbanks Morse Engine™ brand name.

     Products. Our Engine Products and Services segment manufactures licensed heavy-duty, medium-speed diesel, natural gas and dual fuel reciprocating engines, in addition to its own designs. The reciprocating engines range in size from 700 to 31,970 horsepower and from five to 20 cylinders. The government and the general industrial market for marine propulsion, power generation, and pump and compressor applications use these products. We have been building engines for over 115 years under the Fairbanks Morse Engine™ brand name and we have a large installed base of engines for which we supply aftermarket parts and service. Additionally, we have been the U.S. Navy’s supplier of choice for medium-speed diesel engines and have supplied engines to the U.S. Navy for over 70 years.

     Customers. Our Engine Products and Services segment sells its products to customers worldwide, including major shipyards, municipal utilities, institutional and industrial organizations, sewage treatment plants, nuclear power plants and offshore oil and gas platforms. We market our products through a direct sales force of engineers in North America and through independent agents worldwide. Our representative customers include Northrop Grumman, General Dynamics, Lockheed Martin, the U.S. Navy, the U.S. Coast Guard and Exelon. In 2009, the largest customer accounted for approximately 26% of segment revenues.

     Competition. Major competitors for our Engine Products and Services segment include MTU, Caterpillar Inc. and Wartsila Corporation. Price, delivery time, engineering and service support, and engine efficiency relating to fuel consumption and emissions drive competition.

     Raw Materials and Components. Our Engine Products and Services segment purchases multiple ferrous and non-ferrous castings, forgings, plate stock and bar stock for fabrication and machining into engines. In addition, we buy a considerable amount of precision-machined engine components. We believe that all of these raw materials and components are readily available from various suppliers.

Research and Development

     The goal of our research and development effort is to strengthen our product portfolios for traditional markets while simultaneously creating distinctive and breakthrough products. We utilize a process to move product innovations from concept to commercialization, and to identify, analyze, develop and implement new product concepts and opportunities aimed at business growth.

     We employ scientists, engineers and technicians throughout our operations to develop, design and test new and improved products. We work closely with our customers to identify issues and develop technical solutions. The majority of our research and development expenditures are directed toward the development of new sealing products for hostile environments, the development of truck and trailer fleet information systems and the development of bearing products and materials with increased load carrying capability and superior friction and wear characteristics. Prior to introduction, new products are subject to extensive testing at our various facilities and at beta test sites in conjunction with our customers.

Backlog

     At December 31, 2009, we had a backlog of orders valued at $228.3 million compared with $247.4 million at December 31, 2008. Approximately 16% of the backlog, mainly at Fairbanks Morse Engine, is expected to be filled beyond 2010. Backlog represents orders on hand that we believe to be firm. However, there is no certainty that the backlog orders will in fact result in actual sales at the times or in the amounts ordered. In addition, for most of our business, backlog is not particularly predictive of future performance because of our short lead times and some seasonality.

Quality Assurance

     We believe that product quality is among the most important factors in developing and maintaining strong, long-term relationships with our customers. In order to meet the exacting requirements of our customers, we maintain stringent standards of quality control. We routinely employ in-process inspection by using testing equipment as a process aid during all stages of development, design and production to ensure product quality and reliability. These include state-of-the-art CAD/CAM equipment, statistical process control systems, laser tracking devices, failure mode and effect analysis and coordinate measuring machines. We are also able to extract numerical quality control data as a statistical measurement of the quality of the parts being manufactured from our CNC machinery. In addition, we perform quality control tests on parts that we outsource. As a result, we are able to significantly reduce the number of defective parts and therefore improve efficiency, quality and reliability.

     As of December 31, 2009, 31 of our manufacturing facilities were ISO 9000, QS 9000 and/or TS 16949 certified with the remaining facilities working towards obtaining ISO and/or TS certification. Twelve of our facilities are ISO 14001 certified. OEMs are increasingly requiring these standards in lieu of individual certification procedures and as a condition of awarding business.

Patents, Trademarks and Other Intellectual Property

     We maintain a number of patents and trademarks issued by the U.S. and other countries relating to the name and design of our products and have granted licenses to some of these trademarks and patents. We routinely evaluate the need to protect new and existing products through the patent and trademark systems in the U.S. and other countries. We also have proprietary information, consisting of know-how and trade secrets relating to the design, manufacture and operation of our products and their use that is not patented. We do not consider our business as a whole to be materially dependent upon any particular patent, patent right, trademark, trade secret or license.

     In general, we are the owner of the rights to the products that we manufacture and sell. However, we also license patented and other proprietary technology and processes from various companies and individuals in order to broaden our product offerings. We are dependent on the ability of these third parties to diligently protect their intellectual property rights. In several cases, the intellectual property licenses are integral to the manufacture of our products. For example, Fairbanks Morse Engine licenses technology from MAN Diesel for the four-stroke reciprocating engine. A loss of these licenses or a failure on the part of the third party to protect its own intellectual property could reduce our revenues.

Although these licenses are all long-term and subject to renewal, it is possible that we may not successfully renegotiate these licenses or that they could be terminated for a material breach. If this were to occur, our business, financial condition, results of operations and cash flows could be adversely affected.

Employees and Labor Relations

     We currently have approximately 4,100 employees worldwide in our continuing operations. Approximately 2,100 employees are located within the U.S. and approximately 2,000 employees are located outside the U.S., primarily in Europe, Canada and Mexico. Approximately 29% of our U.S. employees are members of trade unions covered by collective bargaining agreements. Union agreements relate, among other things, to wages, hours and conditions of employment. The wages and benefits furnished are generally comparable to industry and area practices.

     We have collective bargaining agreements in place at three of our U.S. facilities. The hourly employees who are unionized are covered by collective bargaining agreements with a number of labor unions and with varying contract termination dates ranging from November 2010 to February 2012. In addition, some of our employees located outside the U.S. are subject to national collective bargaining agreements.

ITEM 1A.		RISK FACTORS

     In addition to the risks stated elsewhere in this annual report, set forth below are certain risk factors that we believe are material. If any of these risks occur, our business, financial condition, results of operations, cash flows and reputation could be harmed. You should also consider these risk factors when you read “forward-looking statements” elsewhere in this report. You can identify forward-looking statements by terms such as “may,” “hope,” “will,” “could,” “should,” “expect,” “plan,” “anticipate,” “intend,” “believe,” “estimate,” “predict,” “potential” or “continue,” the negative of those terms or other comparable terms. Those forward-looking statements are only predictions and can be adversely affected if any of these risks occur.

Risks Related to Our Business

Certain of our subsidiaries are defendants in asbestos litigation.

     The historical business operations of certain subsidiaries of our subsidiary, Coltec Industries Inc (“Coltec”), principally Garlock Sealing Technologies LLC and The Anchor Packing Company (“Anchor”), have resulted in a substantial volume of asbestos litigation in which plaintiffs have alleged personal injury or death as a result of exposure to asbestos fibers. Those subsidiaries manufactured and/or sold industrial sealing products, predominately gaskets and packing products, that contained encapsulated asbestos fibers. Anchor is an inactive and insolvent indirect subsidiary of Coltec. There is no remaining insurance coverage available to Anchor and it has no assets. Our subsidiaries’ exposure to asbestos litigation and their relationships with insurance carriers are actively managed through another Coltec subsidiary, Garrison Litigation Management Group, Ltd. Several risks and uncertainties may result in potential liabilities to us in the future that could have a material adverse effect on our business, financial condition, results of operations and cash flows. Those risks and uncertainties include the following:

•

the potential for a large number of future asbestos claims that are not covered by insurance because insurance coverage is, or will be, depleted;

	•		the uncertainty of the number and per claim value of pending and potential future asbestos claims;
	•		the results of litigation and the success of our litigation and settlement strategies;
	•		the potential for large adverse judgments against us not covered by insurance and any surety/appeal bonds (and related cash collateral) required in connection with appeals;
	•		an increase in litigation costs, fees and expenses that are not covered by insurance;
	•		the financial viability of our subsidiaries’ insurance carriers and their reinsurance carriers, and our subsidiaries’ ability to collect on claims from them;
	•		the timing of claims, payments and insurance recoveries, and limitations imposed on the amount that may be recovered from insurance in any year;
	•		the unavailability of any insurance for claims alleging first exposure to asbestos after July 1, 1984;
	•		the potential for asbestos exposure to extend beyond specific Coltec subsidiaries arising from corporate veil piercing efforts or other claims by asbestos plaintiffs;
	•		bankruptcies of other defendants; and
	•		the prospect for and impact of any federal legislation providing national asbestos litigation reform.

     When settlement payments exceed insurance recoveries from our subsidiaries’ carriers, our subsidiaries are required to fund these obligations from available cash. This could adversely affect our ability to use cash for other purposes, including growth of our business, and adversely affect our financial condition.

     In addition, our estimated liability for claims is highly uncertain and is based on subjective assumptions. The actual liability could vary significantly from the estimate recorded in our financial statements.

     Because of the uncertainty as to the number and timing of potential future asbestos claims, as well as the amount that will have to be paid to settle or satisfy any such claims in the future (including significant bonds required by certain states while we appeal adverse verdicts), and the finite amount of insurance available for future payments, future asbestos claims could have a material adverse effect on our financial condition, results of operations and cash flows.

     For a further discussion of our asbestos exposure, see “Management’s Discussion and Analysis of Financial Condition and Results of Operations — Contingencies — Asbestos.”

Our business and some of the markets we serve are cyclical and distressed market conditions could have a material adverse effect on our business.

     The markets in which we sell our products, particularly chemical companies, petroleum refineries, heavy-duty trucking, semiconductor manufacturing, capital equipment and the automotive industry, are, to varying degrees, cyclical and have historically experienced periodic downturns. Prior downturns have been characterized by diminished product demand, excess manufacturing capacity and

subsequent erosion of average selling prices in these markets resulting in negative effects on our net sales, gross margins and net income. The current downward cycle has impacted our results of operations for our most recent quarterly periods. The current economic environment may affect our opportunities for organic growth and a continued downward cycle could adversely affect our operating results. Moreover, a prolonged downward cycle may critically impair the continued viability of certain of our customers and may adversely impact our accounts receivable with these customers. A prolonged and severe downward cycle in our markets could have a material adverse effect on our business, financial condition, results of operations and cash flows.

We face intense competition that could have a material adverse effect on our business.

     We encounter intense competition in almost all areas of our business. Customers for many of our products are attempting to reduce the number of vendors from which they purchase in order to reduce inventories. To remain competitive, we need to invest continuously in manufacturing, marketing, customer service and support and our distribution networks. We also need to develop new products to continue to meet the needs and desires of our customers. We may not have sufficient resources to continue to make such investments or maintain our competitive position. Additionally, some of our competitors are larger than we are and have substantially greater financial resources than we do. As a result, they may be better able to withstand the effects of periodic economic downturns. Certain of our products may also experience transformation from unique branded products to undifferentiated price sensitive products. This products commoditization may be accelerated by low cost foreign competition. Initiatives designed to distinguish our products through superior service, continuous improvement, innovation, customer relationships, technology, new product acquisitions, bundling with key services, long-term contracts or market focus may not be effective. Pricing and other competitive pressures could adversely affect our business, financial condition, results of operations and cash flows.

If we fail to retain the independent agents and distributors upon whom we rely to market our products, we may be unable to effectively market our products and our revenue and profitability may decline.

     Our marketing success in the U.S. and abroad depends largely upon our independent agents’ and distributors’ sales and service expertise and relationships with customers in our markets. Many of these agents have developed strong ties to existing and potential customers because of their detailed knowledge of our products. A loss of a significant number of these agents or distributors, or of a particular agent or distributor in a key market or with key customer relationships, could significantly inhibit our ability to effectively market our products, which could have a material adverse effect on our business, financial condition, results of operations and cash flows.

Increased costs for raw materials or the termination of existing supply agreements could have a material adverse effect on our business.

     The prices for some of the raw materials we purchase increased in 2009. While we have been successful in passing along a portion of these higher costs, there can be no assurance that we will be able to continue doing so without losing customers. Similarly, the loss of a key supplier or the unavailability of a key raw material could adversely affect our business, financial condition, results of operations and cash flows.

We have exposure to some contingent liabilities relating to discontinued operations, which could have a material adverse effect on our financial condition, results of operations or cash flows in any fiscal period.

     We have some contingent liabilities related to discontinued operations of our predecessors, including environmental liabilities and liabilities for certain products and other matters. In some

instances we have indemnified others against those liabilities, and in other instances we have received indemnities from third parties against those liabilities.

     Claims could arise relating to products or other matters related to our discontinued operations. Some of these claims could seek substantial monetary damages. Specifically, we may potentially be subject to the liabilities related to the firearms manufactured prior to 1990 by Colt Firearms, a former operation of Coltec, and for electrical transformers manufactured prior to 1994 by Central Moloney, another former Coltec operation. Coltec also has ongoing obligations with regard to workers compensation, retiree medical and other retiree benefit matters associated with discontinued operations that relate to Coltec’s periods of ownership of those operations.

     We have insurance, reserves and funds held in trust to address these liabilities. However, if our insurance coverage is depleted, our reserves are not adequate or the funds held in trust are insufficient, environmental and other liabilities relating to discontinued operations could have a material adverse effect on our financial condition, results of operations and cash flows.

We conduct a significant amount of our sales activities outside of the U.S., which subjects us to additional business risks that may cause our profitability to decline.

     Because we sell our products in a number of foreign countries, we are subject to risks associated with doing business internationally. In 2009, we derived approximately 48% of our revenues from sales of our products outside of the U.S. Our international operations are, and will continue to be, subject to a number of risks, including:

	•		unfavorable fluctuations in foreign currency exchange rates;
	•		adverse changes in foreign tax, legal and regulatory requirements;
	•		difficulty in protecting intellectual property;
	•		trade protection measures and import or export licensing requirements;
	•		differing labor regulations;
	•		political and economic instability; and
	•		acts of hostility, terror or war.

Any of these factors, individually or together, could have a material adverse effect on our business, financial condition, results of operations and cash flows.

     We intend to continue to pursue international growth opportunities, which could increase our exposure to risks associated with international sales and operations. As we expand our international operations, we may also encounter new risks that could adversely affect our revenues and profitability. For example, as we focus on building our international sales and distribution networks in new geographic regions, we must continue to develop relationships with qualified local agents, distributors and trading companies. If we are not successful in developing these relationships, we may not be able to increase sales in these regions.

     Efforts to achieve growth through acquisitions, both domestic and international, involve numerous inherent challenges, such as properly evaluating acquisition opportunities, successfully integrating new businesses or product lines, retaining key employees, properly evaluating risks and other

diligence matters, ensuring adequate capital availability and balancing other resource constraints. Acquisitions may not succeed as planned. Failure to properly manage these risks could adversely affect our business, financial condition, results of operations and cash flows.

Our business could be materially adversely affected by numerous other risks, including rising healthcare costs, changes in environmental laws and unforeseen business interruptions.

     Our business may be negatively impacted by numerous other risks. For example, medical and healthcare costs may continue to increase. Initiatives to address these costs, such as consumer driven health plan packages, may not successfully reduce these expenses as needed. Failure to offer competitive employee benefits may result in our inability to recruit or maintain key employees. Other risks to our business include potential changes in environmental rules or regulations, which could negatively impact our manufacturing processes. Use of certain chemicals and other substances could become restricted or such changes may otherwise require us to incur additional costs which could reduce our profitability and impair our ability to offer competitively priced products. Additional risks to our business include global or local events which could significantly disrupt our operations. Terrorist attacks, natural disasters, political insurgencies, pandemics and electrical grid failures are some of the unforeseen risks that could negatively affect our business, financial condition, results of operations and cash flows.

If we are unable to protect our intellectual property rights and knowledge relating to our products, our business and prospects may be negatively impacted.

     We believe that proprietary products and technology are important to our success. If we are unable to adequately protect our intellectual property and know-how, our business and prospects could be negatively impacted. Our efforts to protect our intellectual property through patents, trademarks, service marks, domain names, trade secrets, copyrights, confidentiality, non-compete and nondisclosure agreements and other measures may not be adequate to protect our proprietary rights. Patents issued to third parties, whether before or after the issue date of our patents, could render our intellectual property less valuable. Questions as to whether our competitors’ products infringe our intellectual property rights or whether our products infringe our competitors’ intellectual property rights may be disputed. In addition, intellectual property rights may be unavailable, limited or difficult to enforce in some jurisdictions, which could make it easier for competitors to capture market share in those jurisdictions.

     Our competitors may capture market share from us by selling products that claim to mirror the capabilities of our products or technology. Without sufficient protection nationally and internationally for our intellectual property, our competitiveness worldwide could be impaired, which would negatively impact our growth and future revenue. As a result, we may be required to spend significant resources to monitor and police our intellectual property rights.

Risks Related to Ownership of Our Common Stock

The market price and trading volume of our common stock may be volatile.

     A relatively small number of shares traded in any one day could have a significant effect on the market price of our common stock. The market price of our common stock could fluctuate significantly for many reasons, including in response to the risks described in this section and elsewhere in this report or for reasons unrelated to our operations, such as reports by industry analysts, investor perceptions or negative announcements by our customers, competitors or suppliers regarding their own performance, as well as industry conditions and general financial, economic and political instability. In particular, reports concerning asbestos litigation or asbestos reform could cause a significant increase or decrease in the market price of our common stock.

Because our quarterly revenues and operating results may vary significantly in future periods, our stock price may fluctuate.

     Our revenue and operating results may vary significantly from quarter to quarter. A high proportion of our costs are fixed, due in part to significant selling and manufacturing costs. Small declines in revenues could disproportionately affect operating results in a quarter and the price of our common stock may fall. We may also incur charges to income to cover increases in the estimate of our subsidiaries’ future asbestos liability. Other factors that could affect quarterly operating results include, but are not limited to:

	•		demand for our products;
	•		the timing and execution of customer contracts;
	•		the timing of sales of our products;
	•		payments related to asbestos litigation or annual costs related to asbestos litigation that are not covered by insurance;
	•		the timing of receipt of insurance proceeds;
	•		increases in manufacturing costs due to equipment or labor issues;
	•		changes in foreign currency exchange rates;
	•		changes in applicable tax rates;
	•		unanticipated delays or problems in introducing new products;
	•		announcements by competitors of new products, services or technological innovations;
	•		changes in our pricing policies or the pricing policies of our competitors;
	•		increased expenses, whether related to sales and marketing, raw materials or supplies, product development or administration;
	•		major changes in the level of economic activity in North America, Europe, Asia and other major regions in which we do business;
	•		costs related to possible future acquisitions or divestitures of technologies or businesses;
	•		an increase in the number or magnitude of product liability claims;
	•		our ability to expand our operations and the amount and timing of expenditures related to expansion of our operations, particularly outside the United States; and
	•		economic assumptions and market factors used to determine post-retirement benefits and pension liabilities.

Various provisions and laws could delay or prevent a change of control.

     The anti-takeover provisions of our articles of incorporation and bylaws, our shareholder rights plan and provisions of North Carolina law could delay or prevent a change of control or may impede the ability of the holders of our common stock to change our management. In particular, our articles of incorporation and bylaws, among other things, will:

	•		require a supermajority shareholder vote to approve any business combination transaction with an owner of 5% or more of our shares unless the transaction is recommended by disinterested directors;
	•		limit the right of shareholders to remove directors and fill vacancies;
	•		regulate how shareholders may present proposals or nominate directors for election at shareholders’ meetings; and
	•		authorize our board of directors to issue preferred stock in one or more series, without shareholder approval.

     Our shareholder rights plan will also make an acquisition of a controlling interest in EnPro in a transaction not approved by our board of directors more difficult.

Future sales of our common stock in the public market could lower the market price for our common stock and adversely impact the trading price of our convertible debentures.

     In the future, we may sell additional shares of our common stock to raise capital. In addition, a reasonable number of shares of our common stock are reserved for issuance under our equity compensation plans, including shares to be issued upon the exercise of stock options, vesting of restricted stock or unit grants, and upon conversion of our convertible debentures. We cannot predict the size of future issuances or the effect, if any, that they may have on the market price for our common stock. The issuance and sales of substantial amounts of common stock, or the perception that such issuances and sales may occur, could adversely affect the trading price of the debentures and the market price of our common stock.

Absence of dividends could reduce our attractiveness to investors.

     We have never declared or paid cash dividends on our common stock. Moreover, our current senior secured credit facility restricts our ability to pay cash dividends on common stock if availability under the facility falls below $20 million. As a result, our common stock may be less attractive to certain investors than the stock of companies with a history of paying regular dividends.

Risks Related to Our Capital Structure

Our debt agreement imposes limitations on our operations, which could impede our ability to respond to market conditions, address unanticipated capital investments and/or pursue business opportunities.

     We have a $75 million senior secured revolving credit facility that imposes limitations on our operations, such as limitations on distributions, limitations on incurrence and repayment of indebtedness, and maintenance of a fixed charge coverage financial ratio. These limitations could impede our ability to respond to market conditions, address unanticipated capital investment needs and/or pursue business opportunities.

We may not have sufficient cash to repurchase our convertible debentures at the option of the holder or upon a change of control or to pay the cash payable upon a conversion.

     Upon a change of control, subject to certain conditions, we will be required to make an offer to repurchase for cash all outstanding convertible debentures at 100% of their principal amount plus accrued and unpaid interest, including liquidated damages, if any, up to but not including the date of repurchase. Upon a conversion, we will be required to make a cash payment of up to $1,000 for each $1,000 in principal amount of debentures converted. However, we may not have enough available cash or be able to obtain financing at the time we are required to make repurchases of tendered debentures or settlement of converted debentures. Any credit facility in place at the time of a repurchase or conversion of the debentures may also limit our ability to use borrowings to pay any cash payable on a repurchase or conversion of the debentures and may prohibit us from making any cash payments on the repurchase or conversion of the debentures if a default or event of default has occurred under that facility without the consent of the lenders under that credit facility. Our current $75 million senior secured credit facility prohibits distributions from our subsidiaries to us to make payments of interest on the debentures if a default or event of default exists under the facility. Our senior secured credit facility also prohibits prepayments of the debentures or distributions from our subsidiaries to us to make principal payments or payments upon conversion of the debentures if a default or event of default exists under the facility or the amount of the borrowing base under the facility, less the amount of outstanding borrowings under the facility and letters of credit and reserves, is less than $20 million. Our failure to repurchase tendered debentures at a time when the repurchase is required by the indenture or to pay any cash payable on a conversion of the debentures would constitute a default under the indenture. A default under the indenture or the change of control itself could lead to a default under the other existing and future agreements governing our indebtedness. If the repayment of the related indebtedness were to be accelerated after any applicable notice or grace periods, we may not have sufficient funds to repay the indebtedness and repurchase the debentures or make cash payments upon conversion thereof.

Risks Related to the Recent Global Financial Crisis

The volatility and disruption of global credit markets and adverse changes arising from the current global financial crisis may negatively impact our ability to access financing and expose us to unexpected risks.

The current global financial and credit crisis exposes us to a variety of risks. We have historically funded our business with cash from operations and the proceeds from the issuance of our convertible debentures. We have a $75 million senior secured revolving credit facility with a group of lenders as a backstop to our liquidity needs and there have been no borrowings under this facility to date. In light of the unprecedented disruption of global credit markets and the instability of financial institutions that until recently were of unquestioned strength, there is a risk that a borrowing request properly made under the credit facility would not be honored by one or more of our lenders. Under the terms of the credit facility, no lender is obligated to fund a portion of a borrowing request that is not funded by another lender. Accordingly, in such an instance actual borrowings under our credit facility may be insufficient to support our liquidity needs and we would be required to seek alternate sources of liquidity. In light of the recent capital and credit market disruption and volatility, we cannot assure you that such alternate funding will be available to us on terms and conditions acceptable to us, or at all. As of the date of this filing we have no reason to believe that a borrowing request, properly submitted by us, would not be honored by any of our lenders, all of whom have assured us of their continuing ability to fund our facility. In addition, we maintain deposit accounts with numerous financial institutions around the world in amounts that exceed applicable governmental deposit insurance levels. While we actively monitor our deposit relationships, we are subject to risk of loss in the event of the unanticipated failure of a financial institution in which we maintain deposits, which loss could be material to our results of operations and financial condition.

Derivative transactions may expose us to unexpected risk and potential losses.

     We are party to certain derivative transactions, such as foreign exchange contracts and call options (hedge and warrant transactions) with respect to our convertible debentures, with financial institutions to hedge against certain financial risks. In light of current economic uncertainty and potential for financial institution failures, we may be exposed to the risk that our counterparty in a derivative transaction may be unable to perform its obligations as a result of being placed in receivership or otherwise. In the event that a counterparty to a material derivative transaction is unable to perform its obligations thereunder, we may experience material losses that could materially adversely affect our results of operations and financial condition.

ITEM 1B.		UNRESOLVED STAFF COMMENTS

     Not applicable.

ITEM 2.		PROPERTIES

     We are headquartered in Charlotte, North Carolina and have 44 primary manufacturing facilities in 8 states within the U.S. and 10 countries outside of the U.S. The following table outlines the location, business segment and size of our largest facilities, along with whether we own or lease each facility:

				Owned/		Size
Location		Segment		Leased		(Square Feet)
U.S.
Palmyra, New York		Sealing Products		Owned			694,000
Longview, Texas		Sealing Products		Owned			210,000
Paragould, Arkansas		Sealing Products		Owned			142,000
Thorofare, New Jersey		Engineered Products		Owned			120,000
Beloit, Wisconsin		Engine Products and Services		Owned			433,000
Foreign
Mexico City, Mexico		Sealing Products		Owned			131,000
Saint Etienne, France		Sealing Products		Owned			108,000
Annecy, France		Engineered Products		Leased			196,000
Heilbronn, Germany		Engineered Products		Owned			127,000
Sucany, Slovakia		Engineered Products		Owned			109,000

     Our manufacturing capabilities are flexible and allow us to customize the manufacturing process to increase performance and value for our customers and meet particular specifications. We also maintain numerous sales offices and warehouse facilities in strategic locations in the U.S., Canada and other countries. We believe our facilities and equipment are generally in good condition and are well maintained and able to continue to operate at present levels.

ITEM 3.		LEGAL PROCEEDINGS

     Descriptions of environmental, asbestos and legal matters are included in Item 7 of this annual report under the heading “Management’s Discussion and Analysis of Financial Condition and Results of Operations — Contingencies” and in Note 17 to our Consolidated Financial Statements which descriptions are incorporated by reference herein.

     In addition to the matters referenced above, we are from time to time subject to, and are presently involved in, other litigation and legal proceedings arising in the ordinary course of business. We believe that the outcome of such other litigation and legal proceedings will not have a material adverse affect on our financial condition, results of operations or cash flows.

     We were not subject to any penalties associated with any failure to disclose “reportable transactions” under Section 6707A of the Internal Revenue Code.

ITEM 4.		SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS

     Reserved.

EXECUTIVE OFFICERS OF THE REGISTRANT

Information concerning our executive officers is set forth below:

Name		Age				Position
Stephen E. Macadam			49			President, Chief Executive Officer and Director
William Dries			58			Senior Vice President and Chief Financial Officer
Richard L. Magee			52			Senior Vice President, General Counsel and Secretary
J. Milton Childress II			52			Vice President, Strategic Planning and Business Development
Kenneth D. Walker			40			Vice President, Continuous Improvement
Robert P. McKinney			46			Vice President, Human Resources
Robert D. Rehley			49			Vice President and Controller
Orville G. Lunking			54			Vice President and Treasurer

     Stephen E. Macadam has served as our Chief Executive Officer and President and as a director since April 2008. Prior to accepting these positions with EnPro, Mr. Macadam served as Chief Executive Officer of BlueLinx Holdings Inc. since October 2005. Before joining BlueLinx Holdings Inc., Mr. Macadam was the President and Chief Executive Officer of Consolidated Container Company LLC since August 2001. He served previously with Georgia-Pacific Corp. where he held the position of Executive Vice President, Pulp & Paperboard from July 2000 until August 2001, and the position of Senior Vice President, Containerboard & Packaging from March 1998 until July 2000. Mr. Macadam held positions of increasing responsibility with McKinsey and Company, Inc. from 1988 until 1998, culminating in the role of principal in charge of McKinsey’s Charlotte, North Carolina operation. Mr. Macadam is a director of Georgia Gulf Corporation.

     William Dries is currently Senior Vice President and Chief Financial Officer and has held these positions since May 2002. He served as a consultant to Goodrich Corporation from September 2001 through December 2001 and was employed by Coltec Industries Inc from January 2002 through April 2002. Prior to that, Mr. Dries was employed by United Dominion Industries, Inc. He was Senior Vice President and Chief Financial Officer of United Dominion from December 1999 until May 2001, having

previously served as Senior Vice President — Finance, Vice President and Controller. Mr. Dries, a certified public accountant, was with Ernst & Young LLP in New York prior to joining United Dominion in 1985. Mr. Dries is a director of Polypore International, Inc.

     Richard L. Magee is currently Senior Vice President, General Counsel and Secretary and has held these positions since May 2002. He served as a consultant to Goodrich Corporation from October 2001 through December 2001, and was employed by Coltec Industries Inc from January 2002 through April 2002. Prior to that, Mr. Magee was Senior Vice President, General Counsel and Secretary of United Dominion Industries, Inc. from April 2000 until July 2001, having previously served as Vice President, Secretary and General Counsel. Mr. Magee was a partner in the Charlotte, North Carolina law firm Robinson, Bradshaw & Hinson, P.A. prior to joining United Dominion in 1989.

     J. Milton Childress II is currently Vice President, Strategic Planning and Business Development and has held this position since February 2006, after having joined the EnPro corporate staff in December 2005. He was a co-founder of and served from October 2001 through December 2005 as Managing Director of Charlotte-based McGuireWoods Capital Group. Prior to that, Mr. Childress was Senior Vice President, Planning and Development of United Dominion Industries, Inc. from December 1999 until May 2001, having previously served as Vice President. Mr. Childress held a number of positions with Ernst & Young’s corporate finance consulting group prior to joining United Dominion in 1992.

     Kenneth D. Walker is currently Vice President, Continuous Improvement and has held this position since September 2009, after having previously served as Vice President and General Manager of GGB Americas from September 2006 through September 2009. At Plastomer Technologies, he was the Vice President and General Manager from April 2003 through September 2006, the Vice President, Sales and Marketing from September 2002 through April 2003, and from June 2001 through September 2002 he was the Director, Marketing and Business Development. Prior to joining Plastomer Technologies, Mr. Walker worked in a variety of business development and general management roles at G5 Technologies from January 2000 to May 2001, and at W. L. Gore & Associates from June 1992 to January 2000.

     Robert P. McKinney is currently Vice President, Human Resources and has held this position since April 2008, after having previously served as Deputy General Counsel from May 2002 to April 2008. Prior to joining EnPro, Mr. McKinney was General Counsel at Tredegar Corporation and Assistant General Counsel with The Pittston Company, both in Richmond, Virginia. From 1990 to 1999, Mr. McKinney was employed by United Dominion Industries, Inc. in Charlotte, North Carolina, as Corporate Counsel and subsequently Assistant General Counsel. Prior to joining United Dominion, he was an associate with the Charlotte, North Carolina law firm of Smith Helms Mulliss & Moore.

     Robert D. Rehley is currently Vice President and Controller and has held these positions since November 2008, after having previously served as the Company’s Vice President and Treasurer since May 2002. He was employed by Coltec Industries Inc from January 2002 through April 2002. Mr. Rehley was Assistant Treasurer of Metaldyne Corporation from October 2001 to January 2002, and was Executive Director — Corporate Tax for Metaldyne from December 2000 until October 2001. Previously, he was Treasurer of Simpson Industries from April 1998 until December 2000. Mr. Rehley was Director — Finance and Business Development for Cummins Engine Company, Inc. from October 1996 until April 1998.

     Orville G. Lunking is currently Vice President and Treasurer and has held these positions since February 2009. Prior to joining EnPro, Mr. Lunking served as Vice President and Treasurer for Novelis Inc. from January 2005 to March 2008. Prior to that, he was Corporate Treasurer for Smithfield Foods, Inc. from July 2001 to December 2004. Mr. Lunking previously served as Assistant Treasurer — International at Sara Lee Corporation from July 1997 to June 2001. Prior to this time, he worked in different finance-related roles at Allied Signal Inc., Bankers Trust Company, General Motors Corporation and Milliken & Company.

PART II

ITEM 5.		MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED SHAREHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

     Our common stock is publicly traded on the New York Stock Exchange (“NYSE”) under the symbol “NPO.”

     As of March 1, 2010, there were 5,184 holders of record of our common stock. The price range of our common stock from January 1, 2008 through December 31, 2009 is listed below by quarter:

		Low				High
		Sale Price				Sale Price
Fiscal 2009:
Fourth Quarter		$	20.93			$	27.11
Third Quarter			15.50				24.50
Second Quarter			15.21				20.98
First Quarter			13.36				24.14
Fiscal 2008:
Fourth Quarter		$	14.40			$	37.25
Third Quarter			33.56				43.68
Second Quarter			31.21				40.81
First Quarter			24.40				33.46

     We did not declare any cash dividends to our shareholders during 2009. For a discussion of the restrictions on payment of dividends on our common stock, see “Management’s Discussion and Analysis of Financial Condition and Results of Operations — Liquidity and Capital Resources — Dividends.”

     The following table sets forth all purchases made by us or on our behalf or any “affiliated purchaser,” as defined in Rule 10b-18(a)(3) under the Exchange Act, of shares of our common stock during each month in the fourth quarter of 2009.

														(d) Maximum Number
										(c) Total Number of				(or Approximate Dollar
										Shares (or Units)				Value) of Shares (or
										Purchased as Part of				Units) that May Yet Be
		(a) Total Number				(b) Average Price				Publicly Announced				Purchased Under the
		of Shares (or				Paid per Share				Plans or Programs				Plans or Programs
Period		Units) Purchased				(or Unit)				(1)				(1)
October 1 — October 31, 2009			—				—				—				—
November 1 — November 30, 2009			—				—				—				—
December 1 — December 31, 2009			887	(1)		$	26.41	(1)			—				—
Total			887	(1)		$	26.41	(1)			—				—

CUMULATIVE TOTAL RETURN PERFORMANCE GRAPH

     Set forth below is a line graph showing the yearly change in the cumulative total shareholder return for our common stock as compared to similar returns for the Russell 2000^® Stock Index and a group of our peers consisting of Flowserve Corporation, Robbins & Myers, Inc., Gardner Denver, Inc., Circor International, Inc., IDEX Corporation and The Gormann-Rupp Company. These manufacturing companies were chosen because they are all similarly situated to EnPro in terms of size and markets served. Each of the returns is calculated assuming the investment of $100 in each of the securities on December 31, 2004 and reinvestment of dividends into additional shares of the respective equity securities when paid. The graph plots the respective values beginning on December 31, 2004 and continuing through December 31, 2009. Past performance is not necessarily indicative of future performance.

COMPARISON OF 5-YEAR CUMULATIVE TOTAL RETURN
AMONG ENPRO INDUSTRIES, INC., RUSSELL 2000 INDEX AND PEER GROUP INDEX

ITEM 6.		SELECTED CONSOLIDATED FINANCIAL DATA

     The following historical consolidated financial information as of and for each of the years ended December 31, 2009, 2008, 2007, 2006 and 2005 has been derived from, and should be read together with,

our audited Consolidated Financial Statements and the related notes, for each of those years. The audited Consolidated Financial Statements and related notes as of December 31, 2009 and 2008 and for the years ended December 31, 2009, 2008 and 2007 are included elsewhere in this annual report. The information presented below with respect to the last three completed fiscal years should also be read together with Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations.”

		Year Ended December 31,
		2009				2008(1)				2007(1)				2006(1)				2005(1)
		(as adjusted, in millions, except per share data)
Statement of Operations Data:
Net sales		$	803.0			$	993.8			$	873.8			$	770.2			$	709.2
Income (loss) from continuing operations		$	(143.6	)		$	32.8			$	17.2			$	(178.3	)		$	48.1
Balance Sheet Data:
Total assets		$	1,221.2			$	1,333.8			$	1,449.8			$	1,384.3			$	1,275.3
Long-term debt (including current portion)		$	130.4			$	134.5			$	133.3			$	128.9			$	124.5
Per Common Share Data — Diluted:
Income (loss) from continuing operations		$	(7.19	)		$	1.56			$	0.77			$	(8.54	)		$	2.26

ITEM 7.		MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

     The following is management’s discussion and analysis of certain significant factors that have affected our consolidated financial condition and operating results during the periods included in the accompanying audited Consolidated Financial Statements and the related notes. You should read the following discussion in conjunction with our audited Consolidated Financial Statements and the related notes, included elsewhere in this annual report.

Forward-Looking Statements

     This report contains certain statements that are “forward-looking statements” as that term is defined under the Private Securities Litigation Reform Act of 1995 (the “Act”) and releases issued by the Securities and Exchange Commission. The words “may,” “hope,” “will,” “should,” “could,” “expect,” “plan,” “anticipate,” “intend,” “believe,” “estimate,” “predict,” “potential,” “continue,” and other expressions which are predictions of or indicate future events and trends and which do not relate to historical matters identify forward-looking statements. We believe that it is important to communicate our future expectations to our shareholders, and we therefore make forward-looking statements in reliance upon the safe harbor provisions of the Act. However, there may be events in the future that we are not able to accurately predict or control, and our actual results may differ materially from the expectations we describe in our forward-looking statements. Forward-looking statements involve known and unknown risks, uncertainties and other factors, which may cause our actual results, performance or achievements to differ materially from anticipated future results, performance or achievements expressed or implied by such forward-looking statements. We advise you to read further about certain of these and other risk factors set forth in Item 1A of this annual report, entitled “Risk Factors.” We undertake no

obligation to publicly update or revise any forward-looking statement, either as a result of new information, future events or otherwise. Whenever you read or hear any subsequent written or oral forward-looking statements attributed to us or any person acting on our behalf, you should keep in mind the cautionary statements contained or referred to in this section.

Overview and Outlook

     Overview. EnPro was incorporated under the laws of the State of North Carolina on January 11, 2002. We design, develop, manufacture and market proprietary engineered industrial products. We have 44 primary manufacturing facilities located in the United States and 10 countries outside the United States.

     We manage our business as three segments: a Sealing Products segment, an Engineered Products segment, and an Engine Products and Services segment.

     Our Sealing Products segment designs, manufactures and sells sealing products, including metallic, non-metallic and composite material gaskets, rotary seals, compression packing, resilient metal seals, elastomeric seals, hydraulic components and expansion joints, as well as wheel-end component systems, PTFE products, conveyor belting and sheeted rubber products. These products are used in a variety of industries, including chemical and petrochemical processing, petroleum extraction and refining, pulp and paper processing, heavy-duty trucking, power generation, food and pharmaceutical processing, primary metal manufacturing, mining, water and waste treatment, aerospace, medical, filtration and semiconductor fabrication.

     Our Engineered Products segment includes operations that design, manufacture and sell self-lubricating, non-rolling, metal-polymer, solid polymer and filament wound bearing products, aluminum blocks for hydraulic applications and compressor components. These products are used in a wide range of applications, including the automotive, pharmaceutical, pulp and paper, natural gas, health, pump and compressor construction, power generation, machine tools, air treatment, refining, petrochemical and general industrial markets.

     Our Engine Products and Services segment designs, manufactures, sells and services heavy-duty, medium-speed diesel, natural gas and dual fuel reciprocating engines. The United States government and the general markets for marine propulsion, power generation, and pump and compressor applications use these products and services.

     The Company’s Quincy Compressor business designed, manufactured and sold rotary and reciprocating air compressors, vacuum pumps and air systems used in the automotive, pharmaceutical, natural gas, health, air treatment and general industrial markets. In December 2009, we signed a definitive agreement to sell the Quincy Compressor business to the Atlas Copco Group for approximately $190 million in cash. The transaction closed in the first quarter of 2010. Accordingly, the Quincy Compressor business is presented as a discontinued operation in this Form 10-K. Additional information regarding the sale of the Quincy Compressor business is included in Item 9B and Note 18.

     In January 2008, we acquired certain assets and assumed certain liabilities of Sinflex Sealing Technologies, a distributor and manufacturer of industrial sealing products, located in Shanghai, China. The operation conducts business as Garlock Sealing Technologies (Shanghai) Co. Ltd. and is operated and managed as part of the global Garlock Sealing Technologies business unit in the Sealing Products segment. Sinflex was Garlock’s principal distributor in China for over a decade.

     In February 2008, we acquired the stock of V.W. Kaiser Engineering, a manufacturer of pins, bushings and suspension kits primarily for the heavy-duty truck and bus aftermarket. V.W. Kaiser

Engineering is located in Michigan. It is operated and managed as part of the Stemco business unit, which is in the Sealing Products segment.

     In June 2008, we purchased the 20% ownership of the minority shareholder of Garlock Pty Limited in Australia. Subsequent to the share purchase, we own 100% of Garlock Pty Limited, which is in the Sealing Products segment.

     In October and November 2008, we acquired certain assets of and assumed certain liabilities of three businesses which provide components and aftermarket services for reciprocating compressors to customers in the petroleum, natural gas, PET bottle molding and chemical processing industries. The acquired businesses are Horizon Compressor Services, Inc., located in Houston, Texas; RAM Air, Inc., located in New Smyrna Beach, Florida; and C&P Services (Northern) Limited, located in Warrington, UK. The businesses are operated and managed as part of the CPI business unit in the Engineered Products segment.

     In December 2008, we acquired certain assets and assumed certain liabilities of Northern Gaskets and Mouldings Limited (NGM), a distributor of sealing products and a manufacturer of gaskets, located in Batley, UK. NGM operates as part of Garlock (Great Britain) Limited in the Sealing Products segment. NGM increases Garlock’s presence in the petrochemical, pharmaceutical and oil and gas industries in the UK.

     In February 2009, we purchased PTM (UK) Limited, a privately-owned manufacturer and distributor of sealing products with two locations in the United Kingdom. The acquisition of PTM continued the expansion of Garlock’s presence in the U.K., increasing the scale of the U.K. sealing products business and the ability to address new market segments. PTM is included in our Sealing Products segment.

     In August and September 2009, we purchased USA Parts & Service, LLC, a privately-owned parts supplier for natural gas compressors located in Gillette, Wyoming, and Player & Cornish P.E.T. Limited, a privately-owned manufacturer of aftermarket components for compressors based in the United Kingdom. These businesses are managed as part of the CPI division in the Engineered Products segment.

     In December 2009, we purchased Technetics Corporation, a leading manufacturer of abradable seals, brush seals and acoustic products for turbines used in aerospace and power generation applications located in Deland, Florida. The acquisition of Technetics provides Garlock with a unique line of metal sealing products that is expected to accelerate expansion in aerospace markets and broaden the line of products offered for land-based turbines. Technetics is included in our Sealing Products segment.

     During the first quarter of 2009, we concluded that events had occurred and circumstances had changed which required us to perform an interim period goodwill impairment test for all of our reporting units, including GGB in the Engineered Products segment and at Plastomer Technologies in the Sealing Products segment, both of which had experienced reduced volumes as a result of deterioration in the global economic environment. We performed a preliminary analysis and determined that it was necessary to conduct an impairment test for GGB and Plastomer.

     During the second quarter of 2009, we conducted a thorough analysis to compare the fair value of GGB and Plastomer Technologies to the respective carrying values assigned to their net assets. The excess of the fair value of each reporting unit over the carrying value assigned to its assets and liabilities is the implied fair value of its goodwill. To estimate the fair value, we used both discounted cash flow and market valuation approaches. The discounted cash flow approach uses cash flow projections to calculate the fair value of each reporting unit; the market approach relies on market multiples of similar companies. The key assumptions used for the discounted cash flow approach include business

projections, growth rates, and discount rates. The discount rate we used was based on EnPro’s weighted average cost of capital. For the market approach, we chose a group of 26 companies that we believed to be representative of our diversified industrial and automotive peers. Based on the results of the test, we determined that the fair values of GGB and Plastomer were less than the carrying values of their net assets, resulting in an implied fair value of goodwill of zero for both GGB and Plastomer. As a result, we recognized a non-cash impairment charge of $113.1 million, which represented all of the remaining goodwill in these reporting units, in the second quarter of 2009.

     During the analysis, we also tested the fair value of all our other reporting units and determined that there was no goodwill impairment for any of the other reporting units. We completed our required annual impairment test of goodwill for all of our reporting units as of October 1, 2009 and the results did not indicate any impairment of the remaining goodwill. Based on the results of the test, we determined that the fair value of one of the reporting units exceeded its carrying value by approximately 60% and the other reporting units having goodwill balances had fair values that exceeded their carrying values by over 100%.

     On March 3, 2008, pursuant to a $100 million share repurchase authorization approved by our board of directors, we entered into an accelerated share repurchase (“ASR”) agreement with a financial institution to provide for the immediate retirement of $50 million of our common stock. Under the ASR agreement, we purchased approximately 1.7 million shares of our common stock from a financial institution at an initial price of $29.53 per share. Total consideration paid at initial settlement to repurchase these shares, including commissions and other fees, was approximately $50.2 million and was recorded in shareholders’ equity as a reduction of common stock and additional paid-in capital. The price adjustment period under the ASR terminated on August 29, 2008. In connection with the finalization of the ASR, we remitted in cash a final settlement adjustment of $11.9 million to the financial institution that executed the ASR. The final settlement adjustment, recorded as a reduction of additional paid-in capital, was based on the average of the reported daily volume-weighted average price of our common stock during the term of the ASR. It resulted in a remittance to the financial institution because the volume-weighted average price of our common stock during the term of the ASR exceeded the initial price of $29.53 per share. After the final settlement adjustment, we had completed about $62 million of the share repurchase authorization.

     Pursuant to the share repurchase authorization and in accordance with the terms of a plan to repurchase shares announced on September 8, 2008, we acquired 252,400 shares of our common stock in open-market transactions at an average price of about $28.00 per share, resulting in total repurchases of approximately $7.1 million, including commissions and fees, from October 1, 2008 to October 29, 2008. On October 29, 2008, in light of the volatility in the financial and credit markets, the board of directors terminated the share repurchase plan.

     As described elsewhere in this Management’s Discussion and Analysis of Financial Condition and Results of Operations, we actively manage the asbestos claims against our subsidiaries and the remaining insurance assets available for the payment of these claims. We accrue an estimated liability for both pending and future asbestos claims for the next ten years. For additional information on this subject discussed in this section, see “Contingencies — Asbestos.”

     Outlook

     In the near-term, the pace of recovery in our markets is uncertain, but we believe modest growth is likely during the first half of the year. An increase in volume and the advantages of the cost reduction and efficiency programs we implemented last year should benefit our performance during that period and improve our results compared to the first half of 2009. The short cycles of most of our businesses make the second half of the year more difficult to foresee, but we believe that we have positioned our

operations to capture new opportunities as they arise throughout the year. Our balance sheet remains strong and the resources available for investments in our operations will be increased by the proceeds from the sale of Quincy Compressor. With stable markets, a lean enterprise and a solid financial base, we look forward to resuming and accelerating our growth in 2010.

     Subject to a return to historical levels of profitability, and mix of domestic and foreign earnings, we expect that our effective tax rate in 2010 and beyond will be less volatile than it was in 2009. As a result of structural and organizational changes we have made in our European operations, we anticipate that our effective tax rate should generally be lower than historical rates.

     We anticipate that cash flows in 2010 should benefit from improved operating income and the sale of Quincy Compressor, partially offset by higher capital expenditures, working capital and pension contributions.

     Despite significant improvement in the equity and fixed income investment markets in 2009, our U.S. defined benefit plans continue to be underfunded due to an increase in the value of plan liabilities. Based on currently available data, which is subject to change, we estimate that we will be required to make cash contributions in 2010 totaling $3.4 million. We estimate that the annual U.S. pension expense in 2010 will be flat versus 2009.

     In connection with our business strategy to accelerate growth, we will continue to evaluate acquisitions and divestitures in 2010; however, the impact of such acquisitions and divestitures cannot be predicted and therefore is not reflected in this outlook.

     We address our outlook on asbestos claims and their impact in this Management’s Discussion and Analysis of Financial Condition and Results of Operations in the “Asbestos” subsection of the “Contingencies” section.

Results of Operations

		Years Ended December 31,
		2009				2008				2007
		(in millions)
Sales
Sealing Products		$	399.4			$	503.5			$	457.3
Engineered Products			238.3				350.0				289.4
Engine Products and Services			166.7				142.1				128.1
			804.4				995.6				874.8
Intersegment sales			(1.4	)			(1.8	)			(1.0	)
Total sales		$	803.0			$	993.8			$	873.8
Segment Profit
Sealing Products		$	55.8			$	87.0			$	74.0
Engineered Products			(13.3	)			38.5				39.1
Engine Products and Services			30.5				20.2				14.6
Total segment profit			73.0				145.7				127.7

		Years Ended December 31,
		2009				2008				2007
		(in millions)
Corporate expenses			(28.9	)			(27.4	)			(26.0	)
Asbestos-related expenses			(135.5	)			(52.1	)			(68.4	)
Goodwill impairment charge			(113.1	)			—				—
Interest expense, net			(11.4	)			(10.0	)			(4.2	)
Other income (expense), net			17.7				(6.6	)			(2.6	)
Income (loss) from continuing operations before income taxes		$	(198.2	)		$	49.6			$	26.5

     Segment profit is total segment revenue reduced by operating expenses and restructuring and other costs identifiable with the segment. Corporate expenses include general corporate administrative costs. Expenses not directly attributable to the segments, corporate expenses, net interest expense, asbestos-related expenses, gains/losses or impairments related to the sale of assets and income taxes are not included in the computation of segment profit. The accounting policies of the reportable segments are the same as those for EnPro.

     2009 Compared to 2008

     Sales of $803.0 million in 2009 decreased 19% from $993.8 million in 2008. The decline in sales was the result of weak volumes in the Sealing Products and Engineered Products segments. The drop in volumes resulted from slow industrial markets, reduced OEM truck and trailer volumes, and lower automotive volumes. Fairbanks Morse Engine experienced higher sales of engine aftermarket parts and services in 2009 compared to 2008. The decrease in the values of foreign currencies relative to the U.S. dollar accounted for three percentage points of the decline in sales.

     Segment profit, management’s primary measure of how our operations perform, decreased 50% from $145.7 million in 2008 to $73.0 million in 2009. Segment profit decreased primarily due to lower volumes and lower absorption of manufacturing costs due to reduced production levels. These decreases were partially offset by cost improvements resulting from actions taken in response to market weakness and selected price increases. Segment margins, defined as segment profit divided by sales, declined from 14.7% in 2008 to 9.1% in 2009. The weaker results at most businesses, particularly GGB and Plastomer, were the primary cause for the decrease in segment margins, offsetting margin improvement at Fairbanks Morse Engine.

     Asbestos expenses in 2009 were $135.5 million and included net cash outlays of $29.3 million for legal fees and expenses incurred during the year, $25.5 million in non-cash charges to maintain a ten-year liability estimate for future claims, and an $80.7 million non-cash charge to adjust the liability to reflect changes in its assumptions regarding new claims filings, payments by trusts established to pay claims against former asbestos defendants who have emerged from bankruptcy, and other factors. In 2008, asbestos expenses were $52.1 million. The higher expense in 2009 was primarily the result of adjustments made to management’s estimation model in the fourth quarter of 2009.

     We recorded an income tax benefit of $54.6 million on a loss before income taxes of $198.2 million in 2009. During 2008, we recorded income tax expense of $16.8 million on income before income taxes of $49.6 million. The income tax benefit in 2009 was favorably impacted by structural and organizational changes in our European operations which were not in place during 2008.

     We recorded goodwill impairment charges of $113.1 million in 2009. There were no goodwill impairment charges in 2008.

     In 2009, we recorded income in connection with a reassessment of a liability related to retiree medical benefits for former employees of a previously owned business. An actuarial analysis determined that our expected liability is significantly less than the amount previously accrued. As a result, we reduced the potential liability by $19.2 million.

     Net loss was $139.3 million, or $6.97 per share, in 2009 compared to net income of $50.6 million, or $2.40 per share, in 2008. Earnings (loss) per share are expressed on a diluted basis.

     Following is a discussion of operating results for each segment during the year:

     Sealing Products. Sales of $399.4 million in 2009 were 21% lower than the $503.5 million reported in 2008. Unit volume declines caused most of the reduction and the unfavorable impact of foreign currency exchange rates versus the U.S. dollar accounted for three percentage points of the reduction. Sales at Garlock Sealing Technologies decreased as a result of reduced demand in all geographic markets; weakness in the steel, oil and gas sectors; and weaker foreign currencies partially offset by selected price increases. Stemco’s sales decreased primarily as a result of the lower volumes, partially offset by selected price increases and a favorable mix of aftermarket versus OEM volumes. Its OEM sales for the U.S. heavy-duty truck market in 2009 were significantly lower compared to 2008 as the number of new trailers built and usage of existing trucks decreased as a result of the U.S. economic slowdown. Stemco’s aftermarket sales were also lower compared to 2008 but to a much lesser extent than OEM sales. Plastomer Technologies experienced a sales decrease during 2009 compared to 2008 due to reduced volumes across all product lines.

     Segment profit of $55.8 million in 2009 decreased 36% compared to the $87.0 million reported in 2008, primarily caused by weak volumes. A decrease in profit at Garlock Sealing Technologies reflected the impact of lower sales and lower absorption of manufacturing costs due to reduced production levels, partially offset by lower selling, general and administrative expenses, other cost reductions and selected price increases. Stemco reported a decline in profit primarily due to the slowdown in the heavy-duty vehicle markets and the resulting lower volume and absorption of manufacturing costs, partially offset by a favorable mix of aftermarket versus OEM and selected price increases. Plastomer reported a higher segment loss compared to 2008 due to lower sales in most of its markets and higher material costs. Operating margins for the segment decreased to 14.0% in 2009 from 17.3% in 2008 as the impact of volume was partially negated by improved pricing on certain products and the benefits from cost reduction initiatives.

     Engineered Products. Sales of $238.3 million in 2009 were 32% lower than the $350.0 million reported in 2008, primarily caused by reduced volumes. The year-over-year decrease in the value of foreign currencies produced four percentage points of the sales decrease. Sales for GGB in 2009 were significantly lower than the amount reported in 2008 primarily due to reduced volume in automotive and industrial markets. Sales for Compressor Products International in 2009 were lower due to lower volume in its natural gas and other markets.

     The segment loss in 2009 was $13.3 million, compared to the $38.5 million segment profit reported in 2008. GGB’s results reflected a loss in 2009 due to low volumes and the resulting impact of lower absorption of manufacturing costs due to reduced production levels. Compressor Products International reported decreases in profits as a result of lower volume and lower absorption of manufacturing costs. The negative operating margins of 5.6% for the segment compare to positive 11.0% margins in 2008.

     Engine Products and Services. Sales increased 17% from $142.1 million in 2008 to record sales of $166.7 million in 2009. The increase was attributable to higher engine, aftermarket parts and service sales.

     The segment reported a profit of $30.5 million in 2009 compared to $20.2 million in 2008. The year-over-year improvement was driven by the increase in volumes and higher margin aftermarket sales. Operating margins for the segment increased to 18.3% in 2009 from 14.2% in 2008.

2008 Compared to 2007

     Sales of $993.8 million in 2008 increased 14% from $873.8 million in 2007. The results of acquisitions added six percentage points of the sales increase. The increase in the values of foreign currencies relative to the U.S. dollar contributed three percentage points to the increase. The remaining growth was primarily the result of selected price increases and additional volume at several businesses partially offset by lower volume at Stemco due to a decline in demand from OEM heavy-duty truck and trailer manufacturers and aftermarket customers.

     Segment profit increased 14% from $127.7 million in 2007 to $145.7 million in 2008. Segment profit increased primarily due to selected price increases, increased volume and acquisitions. These improvements were partially offset by cost increases in several areas, particularly raw materials and other manufacturing input costs. Segment margins increased slightly from 14.6% in 2007 to 14.7% in 2008.

     Asbestos expenses in 2008 were $52.1 million and included net cash outlays of $26.2 million for legal fees and expenses incurred during the year and $25.9 million in non-cash charges to maintain a ten-year liability estimate for future claims. In 2007, asbestos expenses were $68.4 million. The higher expense in 2007 was primarily the result of adjustments made to management’s estimation model in the fourth quarter of 2007.

     Net interest expense in 2008 was $10.0 million compared to net interest expense of $4.2 million in 2007. The net interest expense increase was a result of the decrease in invested cash balances and lower yields on investments.

     Our effective tax rate for 2008 was 33.9% compared to 35.1% in 2007. The change in the rate is principally a result of the reversal of reserves for uncertain tax positions in connection with the settlement of various tax audits and the benefit of reductions in statutory income tax rates in certain countries.

     Net income was $50.6 million, or $2.40 per share, in 2008 compared to $35.1 million, or $1.57 per share, in 2007 before extraordinary items. Earnings per share are expressed on a diluted basis.

     Following is a discussion of operating results for each segment during the year:

     Sealing Products. Sales of $503.5 million in 2008 were 10% higher than the $457.3 million reported in 2007, however, the year-to-year improvement decelerated as the year progressed. Acquisitions added three percentage points of the growth while organic growth contributed five percentage points. The favorable impact of foreign currency exchange rates versus the U.S. dollar accounted for two percentage points of the growth. Garlock Sealing Technologies’ sales were favorably impacted by increased demand in European markets; strength in the oil and gas, energy, mining and primary metals sectors; selected price increases; and increases in the value of foreign currencies. Stemco’s sales during the year increased as a result of the acquisition of the V.W. Kaiser business in late February. Its OEM and aftermarket sales for the U.S. heavy-duty truck market continued to be lower compared to 2007 as the number of new trailers built and usage of existing trucks decreased as a result of

the U.S. economic slowdown. Sales for Plastomer Technologies were down in 2008 compared to 2007 due to slowdowns in its semi-conductor markets.

     Segment profit of $87.0 million in 2008 increased 18% compared to the $74.0 million reported in 2007. An increase in profit at Garlock Sealing Technologies resulted from lower restructuring charges and reflects the benefits of its higher sales volumes. Stemco reported an increase in profit due to the impact of the addition of the V.W. Kaiser business, partially offset by the slowdown in the heavy-duty vehicle markets. Costs associated with the consolidation of its facilities and lower volumes negatively impacted Plastomer Technologies’ results compared to 2007. Operating margins for the segment increased to 17.3% in 2008 from 16.2% in 2007 primarily as a result of the earnings improvement at Garlock Sealing Technologies.

     Engineered Products. Sales of $350.0 million in 2008 were 21% higher than 2007 sales of $289.4. Acquisitions favorably impacted revenue by eleven percentage points and increased activity in the segment’s operations added four percentage points. The increase in the value of foreign currencies contributed six percentage points of the sales increase. Sales for Compressor Products International in 2008 were higher than 2007 due to acquisitions and increased volumes. Despite a significant decline late in the year, GGB sales in 2008 exceeded 2007 sales due to favorable foreign exchange rates and an acquisition.

     Segment profits were $38.5 million in 2008, which compares to $39.1 million reported in 2007. GGB’s profits decreased in 2008 due to material cost increases that exceeded price increases. Significant market declines in the second half largely negated first half volume gains and resulted in lower productivity. Profits at Compressor Products International increased as a result of higher volumes and acquisitions. Operating margins for the segment decreased from 13.5% in 2007 to 11.0% in 2008.

     Engine Products and Services. Sales increased from $128.1 million in 2007 to $142.1 million in 2008. The increase in sales was principally due to higher revenue from engines and higher parts sales in 2008.

     The segment reported a profit of $20.2 million in 2008 compared to $14.6 million in 2007. The improvement resulted from higher margins on engine sales, increased parts volumes and productivity improvements in 2008 compared to 2007. Operating margins for the segment increased to 14.2% in 2008 from 11.4% in 2007.

Restructuring and Other Costs

     Restructuring expense was $10.2 million, $4.6 million and $6.0 million for 2009, 2008 and 2007, respectively. In 2009, the expense was primarily related to restructuring activities associated with workforce reductions at GGB and Garlock Sealing Technologies. In 2007 and 2008, the expense related primarily to Garlock Sealing Technologies’ Palmyra modernization project. See Note 3 to the Consolidated Financial Statements for additional information regarding restructuring and other costs in each year.

Liquidity and Capital Resources

     Cash requirements for working capital, capital expenditures, acquisitions, debt repayments and common stock repurchases have been funded from cash balances on hand and cash generated from operations. The Company is proactively pursuing acquisition opportunities, some of which may be of a size which could exceed our cash balances at the time of closing. Should we need additional capital, we have other resources available, which are discussed in this section under the heading of “Capital Resources.”

     Cash Flows

     Operating activities provided $59.0 million, $77.5 million and $81.3 million in 2009, 2008 and 2007, respectively.

     The decrease in operating cash flows in 2009 versus 2008 was primarily attributable to the weak volumes that reduced net income, partially offset by improvements in working capital. Working capital changes increased cash by $17.4 million in 2009 compared to a $20.1 million cash reduction in 2008, a $37.5 million improvement.

     The decrease in operating cash flows in 2008 versus 2007 was primarily attributable to an increase in working capital and higher net outflows for asbestos. Asbestos-related insurance collections were lower in 2008 than in 2007 and amounted to $72.7 million and $90.2 million, respectively. The decrease in insurance collections was partially offset by a decrease in asbestos-related payments, which amounted to $109.7 million in 2008 and $115.1 million in 2007. We made a $10 million contribution to the U.S. defined benefit pension plans in 2007 but no contribution in 2008.

     We used $66.3 million, $58.5 million and $138.6 million in investing activities in 2009, 2008 and 2007, respectively. The increased cash used in investing activities in 2009 versus 2008 was primarily attributable to increased net payments for acquisitions and reduced proceeds from sales of assets and liquidation of investments, largely offset by reduced capital investments. We made net payments for acquisitions of $51.1 million in 2009 compared to $33.0 million in 2008. Capital expenditures in 2009 were $22.7 million less than in 2008 as most businesses reduced spending in response to less favorable market conditions.

     The decreased cash used in investing activities in 2008 versus 2007 was primarily attributable to a reduction in net payments for acquisitions from $77.0 million in 2007 to $33.0 million in 2008, and a reclassification of $19.5 million of unrestricted cash balances to other current and noncurrent assets in 2007. These were partially offset by a $14.4 million increase in proceeds from sales of assets and liquidation of investments in 2008 versus 2007.

     In 2009, we retired $9.9 million in industrial revenue bonds and other debt.

     In 2008, we paid $69.2 million in connection with the repurchase of approximately 1.9 million shares of our common stock under a share repurchase program. These transactions were reflected as financing activities in the Consolidated Statements of Cash Flows.

     Capital Resources

     Our primary U.S. operating subsidiaries have a senior secured revolving credit facility with a group of banks, which matures on April 21, 2011. We have not borrowed against this facility but do have $7.5 million of letters of credit outstanding. The facility is collateralized by our receivables, inventories, intellectual property, insurance receivables and all other personal property assets (other than fixed assets) of our U.S. subsidiaries, and by pledges of 65% of the capital stock of our direct foreign subsidiaries and 100% of the capital stock of our direct and indirect U.S. subsidiaries. The facility contains covenants and restrictions that are customary for an asset-based loan, including limitations on dividends, limitations on incurrence of indebtedness and maintenance of a fixed charge coverage financial ratio. Most of the covenants and restrictions apply only if availability under the facility falls below certain levels.

     The maximum initial amount available for borrowings under the facility is $75 million. Under certain conditions, we may request that the facility be increased by up to $25 million, to $100 million in

total. Actual borrowing availability at any date is determined by reference to a borrowing base of specified percentages of eligible accounts receivable and inventory and is reduced by usage of the facility, which includes outstanding letters of credit, and any reserves. The actual borrowing availability at December 31, 2009 under our senior secured revolving credit facility was $63.2 million after giving consideration to letters of credit outstanding.

     We issued $172.5 million of convertible debentures in 2005. The debentures bear interest at an annual rate of 3.9375%, and we pay accrued interest on April 15 and October 15 of each year. The debentures will mature on October 15, 2015. The debentures are direct, unsecured and unsubordinated obligations and rank equal in priority with our unsecured and unsubordinated indebtedness and will be senior in right of payment to all subordinated indebtedness. They would effectively rank junior to any secured indebtedness to the extent of the value of the assets securing such indebtedness. The debentures do not contain any financial covenants. Holders may convert the debentures into cash and shares of our common stock, if any, at an initial conversion rate of 29.5972 shares of common stock per $1,000 principal amount of debentures (which is equal to an initial conversion price of $33.79 per share), subject to adjustment, before the close of business on October 15, 2015. Upon conversion, we would deliver (i) cash equal to the lesser of the aggregate principal amount of the debentures to be converted or our total conversion obligation, and (ii) shares of our common stock in respect of the remainder, if any, of our conversion obligation. Conversion is permitted only under certain circumstances that had not occurred at December 31, 2009.

     We used a portion of the net proceeds from the sale of the debentures to enter into call options (hedge and warrant transactions), which entitle us to purchase shares of our stock from a financial institution at $33.79 per share and entitle the financial institution to purchase shares of our stock from us at $46.78 per share. This will reduce potential dilution to our common stockholders from conversion of the debentures and have the effect to us of increasing the conversion price of the debentures to $46.78 per share.

     We received approximately $184.2 million in cash from the sale of Quincy on March 1, 2010 and expect to receive an additional $5.8 million in cash on or before December 18, 2010 upon the closing of the sale of Quincy’s subsidiary in China. Net of taxes, the proceeds from the sale of Quincy should total approximately $150.0 million. Additional information regarding the sale of the Quincy Compressor business is included in Item 9B and Note 18.

     Dividends

     To date, we have not paid dividends and we do not intend to pay a dividend in the foreseeable future. If availability under our senior secured revolving credit facility falls below $20 million, we would be limited in our ability to pay dividends. As of December 31, 2009, we exceeded this minimum threshold. The indenture that governs the convertible debentures does not restrict us from paying dividends.

Critical Accounting Policies and Estimates

     The preparation of our Consolidated Financial Statements, in accordance with accounting principles generally accepted in the United States, requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosures pertaining to contingent assets and liabilities. Note 1, “Overview and Significant Accounting Policies,” to the Consolidated Financial Statements describes the significant accounting policies used to prepare the Consolidated Financial Statements. On an ongoing basis we evaluate our estimates, including, but not limited to, those related to bad debts, inventories, intangible assets, income taxes, warranty obligations, restructuring, pensions and other postretirement benefits, and contingencies and litigation. We base our estimates on historical experience and on various other assumptions that we believe to be reasonable under the circumstances. Actual results may differ from these estimates.

     We believe that the following accounting policies and estimates are the most critical. Some of them involve significant judgments and uncertainties and could potentially result in materially different results under different assumptions and conditions.

     Revenue Recognition

     Revenue is recognized at the time title and risk of ownership is transferred or when services are rendered. Any shipping costs billed to customers are recognized as revenue and expensed in cost of goods sold.

     Asbestos

     We accrue for known and estimated future asbestos claims for the next ten years and we record legal fees and expenses only when incurred.

     The significant assumptions underlying the material components of the estimated liability include: the number and trend of claims asserted; the mix of alleged diseases or impairment; the trend in the number of claims for malignant cases, primarily mesothelioma; the probability that some existing and potential future claims will eventually be dismissed without payment; the estimated amount to be paid per claim; and the timing and impact of large amounts available for the payment of claims from the 524(g) trusts of former defendants in bankruptcy. The actual number of future actions filed per year and the payments necessary to resolve those claims could exceed those reflected in our estimate of the liability.

     With the assistance of Bates White, we periodically review the period over which we can make a reasonable estimate, the assumptions underlying our estimate, the range of reasonably possible potential liabilities and management’s estimate of the liability, and adjust the estimate if necessary. Changing circumstances and new data that may become available could cause a change in the estimated liability in the future by an amount that cannot currently be reasonably estimated, and that increase could be significant and material. Additional discussion is included in this Management’s Discussion and Analysis of Financial Condition and Results of Operations in “Contingencies — Asbestos.”

     Derivative Instruments and Hedging Activities

     We have entered into contracts to hedge forecasted transactions occurring at various dates through December 2010 that are denominated in foreign currencies. Most of these contracts are accounted for as cash flow hedges. As cash flow hedges, the effective portion of the gain or loss on the contracts is reported in other comprehensive income and the ineffective portion is reported in income. Amounts in accumulated other comprehensive income are reclassified into income in the period when the hedged transactions occur.

     Pensions and Postretirement Benefits

     We and certain of our subsidiaries sponsor domestic and foreign defined benefit pension and other postretirement plans. Major assumptions used in the accounting for these employee benefit plans include the discount rate, expected return on plan assets, rate of increase in employee compensation levels and assumed health care cost trend rates. Assumptions are determined based on data available to us and appropriate market indicators, and are evaluated each year as of the plans’ measurement date. A change in any of these assumptions could have a material effect on net periodic pension and postretirement benefit costs reported in the Consolidated Statements of Operations, as well as amounts recognized in the Consolidated Balance Sheets. See Note 12 to the Consolidated Financial Statements for a discussion of pension and postretirement benefits.

     Income Taxes

     We use the asset and liability method of accounting for income taxes. Temporary differences arising from the difference between the tax basis of an asset or liability and its carrying amount on the Consolidated Balance Sheet are used to calculate future income tax assets or liabilities. This method also requires the recognition of deferred tax benefits, such as net operating loss carryforwards, to the extent that realization of such benefits is more likely than not. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to the taxable income (losses) in the years in which those temporary differences are expected to be recovered or settled. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in income in the period that includes the enactment date. See Note 5 to the Consolidated Financial Statements for a discussion of income taxes.

     Goodwill and Other Intangible Assets

     We do not amortize goodwill, but instead it is subject to annual impairment testing. The goodwill asset impairment test involves comparing the fair value of a reporting unit to its carrying amount. If the carrying amount of a reporting unit exceeds its fair value, a second step of comparing the implied fair value of the reporting unit’s goodwill to the carrying amount of that goodwill is required to measure the potential goodwill impairment loss. There are inherent assumptions and estimates used in developing future cash flows which require management to apply judgment to the analysis of intangible asset impairment, including projecting revenues, interest rates, the cost of capital, royalty rates and tax rates. Many of the factors used in assessing fair value are outside the control of management and it is reasonably likely that assumptions and estimates will change in future periods. These changes can result in future impairments.

New Accounting Pronouncements

     See Note 1 to the Consolidated Financial Statements for a description of new accounting pronouncements, including the expected dates of adoption and the expected effects on results of operations, cash flows and financial condition, if any.

Contingencies

     General

     Various claims, lawsuits and administrative proceedings with respect to commercial, product liability, asbestos and environmental matters, all arising in the ordinary course of business, are pending or threatened against us or our subsidiaries and seek monetary damages and/or other remedies. We believe that any liability that may finally be determined with respect to commercial and non-asbestos product liability claims should not have a material effect on our consolidated financial condition, results of operations or cash flows. From time to time, we and our subsidiaries are also involved as plaintiffs in legal proceedings involving contract, patent protection, environmental, insurance and other matters.

     Environmental

     Our facilities and operations are subject to federal, state and local environmental and occupational health and safety requirements of the U.S. and foreign countries. We take a proactive approach in our efforts to comply with environmental, health and safety laws as they relate to our manufacturing operations and in proposing and implementing any remedial plans that may be necessary. We also regularly conduct comprehensive environmental, health and safety audits at our facilities to maintain compliance and improve operational efficiency.

     Although we believe past operations were in substantial compliance with the then applicable regulations, we or one of our subsidiaries have been named as a potentially responsible party, or are otherwise involved, at 20 sites where the costs to us are expected to exceed $100,000. Investigations have been completed for 16 sites and are in progress at the other four sites. The majority of these sites relate to remediation projects at former operating facilities that were sold or closed and primarily deal with soil and groundwater contamination.

     As of December 31, 2009 and 2008, EnPro had accrued liabilities of $20.5 million and $22.1 million, respectively, for estimated future expenditures relating to environmental contingencies. See Note 17 to the Consolidated Financial Statements for additional information regarding our environmental contingencies.

     Colt Firearms and Central Moloney

     We have contingent liabilities related to divested businesses for which certain of our subsidiaries retained liability or are obligated under indemnity agreements. These contingent liabilities include, but are not limited to, potential product liability and associated claims related to firearms manufactured prior to 1990 by Colt Firearms, a former operation of Coltec, and for electrical transformers manufactured prior to 1994 by Central Moloney, another former Coltec operation. Coltec also has ongoing obligations, which are included in retained liabilities of previously owned businesses in our Consolidated Balance Sheets, with regard to workers’ compensation, retiree medical and other retiree benefit matters that relate to Coltec’s periods of ownership of these operations.

     Crucible Materials Corporation

     Crucible Materials Corporation (“Crucible”), which is engaged primarily in the manufacture and distribution of high technology specialty metal products, was a wholly owned subsidiary of Coltec until 1985 when a majority of the outstanding shares were sold. Coltec divested its remaining minority interest in 2004. Crucible filed for Chapter 11 bankruptcy protection in May 2009. See Note 17 to the Consolidated Financial Statements for information about certain liabilities relating to Coltec’s ownership of Crucible.

     Debt and Capital Lease Guarantees

     As of December 31, 2009, we had contingent liabilities for potential payments on a guarantee of certain debt and lease obligations totaling $0.6 million arising from the divestiture of Crucible. The obligations mature in 2010. In the event that Crucible does not fulfill its obligations under the debt or lease agreements, we could be responsible for all or a portion of these obligations. There is no liability for these guarantees reflected in our Consolidated Balance Sheets.

     Asbestos

     History. Certain of our subsidiaries, primarily Garlock Sealing Technologies LLC (“Garlock”) and The Anchor Packing Company (“Anchor”), are among a large number of defendants in actions filed in various states by plaintiffs alleging injury or death as a result of exposure to asbestos fibers. Among the many products at issue in these actions are industrial sealing products, including gaskets and packing products. Since the first asbestos-related lawsuits were filed against Garlock in 1975, Garlock and Anchor have processed more than 900,000 asbestos claims to conclusion (including judgments, settlements and dismissals) and, together with their insurers, have paid over $1.4 billion in settlements and judgments and over $400 million in fees and expenses. See Note 17 to the Consolidated Financial Statements for information on the disease mix in the claims, new claims recently filed, product defenses asserted by our subsidiaries, recent trial and appellate results, and settlements.

     Status of Anchor. Anchor is an inactive and insolvent indirect subsidiary of Coltec. There is no remaining insurance coverage available to Anchor. Anchor has no remaining assets and has not committed to settle any actions since 1998. As cases reach the trial stage, Anchor is typically dismissed without payment.

     Insurance Coverage. At December 31, 2009, Garlock had available $238.6 million of insurance and trust coverage that we believe will be available to cover current and future asbestos claims and certain expense payments. In addition, we believe that Garlock may also recover some additional insurance from insolvent carriers over time. Garlock collected approximately $1.0 million, $0.1 million and $1.0 million, respectively, from insolvent carriers in 2009, 2008 and 2007. There can be no assurance that Garlock will collect any additional insurance from insolvent carriers. See Note 17 to the Consolidated Financial Statements for additional information about the quality of Garlock’s insurance, arrangements for payments with certain insurers, the resolution of past insurance disputes, and coverage exclusions for exposure after July 1, 1984.

     Our Liability Estimate. Prior to mid-2004, we maintained that our subsidiaries’ liability for unasserted claims was not reasonably estimable. We estimated and recorded liabilities only for pending claims in advanced stages of processing, for which we believed we had a basis for making a reasonable estimate. We disclosed the significance of the total potential liability for unasserted claims in considerable detail. During 2004 we authorized counsel to retain Bates White to assist in estimating our subsidiaries’ liability for pending and future asbestos claims.

     Bates White’s first report, dated February 17, 2005, provided an estimate of the liability as of December 31, 2004 for the following ten years, which represented a time horizon within which Bates White believed such liability was both probable and estimable within a range of values. Bates White has updated its estimate regularly since the end of 2004.

     The estimated range of potential liabilities provided by Bates White at December 31, 2009 was $480 million to $602 million. According to Bates White, increases in the range over time have been attributable primarily to (1) the propensity to sue Garlock, (2) an increase in settlement values of mesothelioma claims, (3) an increase in claims filings and values in some jurisdictions, most notably California, and (4) the delay in, and uncertain impact of, the funding and implementation of trusts formed under Section 524(g) of the United States Bankruptcy Code to pay asbestos claims against numerous defendants in Chapter 11 reorganization cases. The 524(g) trusts are estimated by some, including Bates White, to have more than $20 billion dollars available for the payment of asbestos claims, with billions more scheduled to fund new trusts in cases currently nearing confirmation. Trust payments could have a significant impact on our future settlement payments and could therefore significantly affect our liability.

     We have independently developed internal goals for asbestos-related liabilities. We have used those goals for a variety of purposes, including guidance for settlement negotiations and trial strategy, in our strategic planning, budgeting and cash flow planning processes, in setting targets for annual and long-term incentive compensation, and in producing our own estimate of the current and future liability. Our internal estimate has been and continues to be within the Bates White range of equally likely estimates. As a result, Bates White and management believe that our internal estimate for the next ten years represents the most likely point within the range. Accordingly, our recorded liability is derived from our internal estimate.

     We currently estimate that the liability of our subsidiaries for the indemnity cost of resolving asbestos claims for the next ten years will be $485 million. The estimated liability of $485 million is before any tax benefit and is not discounted to present value, and it does not include fees and expenses, which are recorded as incurred. The recorded liability will continue to be impacted by actual claims and

settlement experience and any change in the legal environment that could cause a significant increase or decrease in the long-term expectations of management and Bates White. We expect the recorded liability to fluctuate, perhaps significantly. Any significant change in the estimated liability could have a material effect on our consolidated financial position and results of operations.

     We made a significant adjustment (discussed below) to our liability based on an adjustment to our management estimate in the fourth quarter of 2009. We adjusted our estimate based on trends and factors also reflected in an increase in the high and low ends of the Bates White liability estimate. Our estimate continues to fall within the Bates White range, developed independently, and we believe that our estimate is the best estimate within the Bates White range of reasonable and probable estimates of Garlock’s future obligation.

     Bates White also indicated a broader range of potential estimates from $252 million to $698 million. We caution that points within that broader range remain possible outcomes. Also, while we agree with Bates White that “beyond two to four years for Garlock’s economically-driven non-malignant claims and beyond ten years for Garlock’s cancer claims and medically-driven non-malignant claims, there are reasonable scenarios in which the [asbestos] expenditure is de minimus,” we caution that the process of estimating future liabilities is highly uncertain. Adjusting our liability to the best estimate within the range does not change that fact. In the words of the Bates White report, “the reliability of estimates of future probable expenditures of Garlock for asbestos-related personal injury claims declines significantly for each year further into the future.” Scenarios continue to exist that could result in total future asbestos-related expenditures for Garlock in excess of $1 billion.

     As previously mentioned, the liability estimate does not include legal fees and expenses, which add considerably to the costs each year. Over the last two years, these expenses have averaged approximately $7 million per quarter. In addition to these legal fees and expenses, we expect to continue to record charges to income in future quarters for:

	•		Increases or decreases, if any, in management’s estimate of Garlock’s potential liability, plus
	•		Increases, if any, that result from additional quarters added to maintain the ten-year estimation period (increases of this type have averaged approximately $6 million per quarter for the last two years), plus
	•		Amounts, if any, of solvent insurance lost or commuted, offset by insolvent recoveries and earnings from insurance settlement trusts.

     In 2009, we recorded a pre-tax charge of $135.5 million to reflect net cash outlays of $29.3 million for legal fees and expenses paid during the year and a $106.2 million non-cash charge. The non-cash charge included (1) $25.5 million, primarily to add an estimate of the liability for 2019 to maintain a ten-year estimate and (2) $80.7 million resulting from an adjustment in the fourth quarter of 2009 to management’s estimate of the first nine years of the ten-year period. Management’s adjustment to its previous estimate was based on its review of mesothelioma claims filings and trends with respect to parties named as defendants in claims, settlement and payment trends, continued high activity in the court system, particularly in certain jurisdictions that management believes present particularly high risks for asbestos defendants, and, most importantly, the continuing difficulty caused by the lack of transparency in the distribution procedures of large 524(g) trusts of former co-defendants that have emerged from bankruptcy proceedings.

     The ten-year liability projections of management and Bates White have both included an assumption that Garlock’s liability in the tort system would decrease as 524(g) trusts begin paying the

liabilities of bankrupt former co-defendants that contributed to injuries of plaintiffs who sue Garlock. This assumption has been based on: (1) principles of joint and several liability that caused the amount of payments to resolve asbestos claims against Garlock to increase beginning in 2000 to 2002, when the most prominent asbestos defendants sought bankruptcy protection and ceased paying claims in the tort system; (2) the emergence, beginning in 2007 and continuing today, of numerous wealthy 524(g) trusts, established by such bankrupt companies to pay asbestos claims caused by their products, and (3) state law that protects defendants like Garlock from having to pay plaintiffs’ damages to the extent paid by such trusts and other co-defendants. Payments from such trusts accordingly should offset and reduce damages claims against Garlock.

     While 524(g) trusts have begun making substantial payments to the claimants, Garlock has not experienced a reduction in the damages being sought from Garlock. The distribution procedures of the 524(g) trusts do not permit Garlock and other tort-system co-defendants from having any access to claims made to the trusts or the accompanying evidence of exposure to the asbestos-containing products addressed by such trusts.

     To date, despite billions of dollars of 524(g) trust distributions, many plaintiffs continue to seek damages from Garlock on the basis that no evidence exists permitting them to recover from 524(g) trusts. Garlock and Bates White are working on a variety of strategies to expose the unfairness of trust distribution procedures and bring fairness to the trust payment system. Both Bates White and management assume that Garlock will have some success in those endeavors over time, and that assumption continues to be embedded in our and Bates White’s liability estimates.

     In 2008, we recorded a pre-tax charge of $52.1 million to reflect net cash outlays of $26.2 million for legal fees and expenses paid during the year and a $25.9 million non-cash charge. The non-cash charge included $23.8 million, primarily to add an estimate of the liability for 2018 to maintain a ten-year estimate and $2.1 million to reduce the remaining insurance estimated to be available from remaining policies with various London market carriers.

     In 2007, we recorded a pre-tax charge to income of $68.4 million to reflect net cash outlays of $25.8 million for legal fees and expenses incurred during the year, and a $42.6 million non-cash charge. The non-cash charge included $23.2 million related to the addition of periods and $19.4 million to adjust the liability based on revisions to management’s estimate in the fourth quarter of 2007. We made this adjustment based on our review of negotiations and payment trends and our belief that it is more likely that, in the future, a higher percentage of settlement commitments made in any year will also be paid in that same year.

     See Note 17 to the Consolidated Financial Statements for additional information about our liability estimate.

     Quantitative Claims and Insurance Information. The liability recorded on our books as of December 31, 2009 was $492.3 million (our ten-year estimate of the liability described above of $485.0 million plus $7.3 million of accrued legal and other fees already incurred but not yet paid). The liability included $85.4 million classified as a current liability and $406.9 million classified as a noncurrent liability. The recorded amounts do not include legal fees and expenses to be incurred in the future.

     The table below quantitatively depicts the number of pending cases, asbestos-related cash flows, the amount that we expect Garlock to recover from insurance related to this liability, and an analysis of the liability.

		As of and for the
		Year Ended
		December 31,
		2009				2008				2007
Pending Cases (1)
New actions filed during period			4,400				5,500				5,200
Open actions at period-end			97,400				104,100				105,700
Cash Flow (dollars in millions)
Payments (2)		$	(109.6	)		$	(109.7	)		$	(115.1	)
Insurance recoveries (3)			69.8				72.7				90.2
Net cash flow		$	(39.8	)		$	(37.0	)		$	(24.9	)
Solvent Insurance and Trust Assets (dollars in millions)
Insurance receivable for previously paid claims (4)		$	183.3			$	228.7			$	252.0
Insurance available for pending and future claims			55.3				78.7				129.5
Remaining solvent insurance and trust assets		$	238.6			$	307.4			$	381.5
Liability Analysis (dollars in millions)
Liability for pending and future claims (5)(6)		$	492.3			$	465.5			$	524.4
Insurance available for pending and future claims			55.3				78.7				129.5
Liability in excess of insurance coverage (6)			437.0				386.8				394.9
Insurance receivable for previously paid claims			183.3				228.7				252.0
Liability in excess of anticipated insurance collections (6)		$	253.7			$	158.1			$	142.9

     Strategy and Outlook. Garlock’s asbestos claims management strategy is to focus on trial-listed cases, pursue training initiatives and research projects to improve its defense at trial, aggressively negotiate reduced settlement commitments and payments each year, carefully manage and maximize collections from a declining pool of available insurance coverage, and proactively support efforts to achieve meaningful asbestos reform.

     Beginning in 2000, when the largest asbestos defendants filed bankruptcy cases to resolve their asbestos liabilities and thereby withdrew from the civil court system, plaintiffs pursued Garlock and other surviving “peripheral” defendants in civil court actions to recover the full amounts of their alleged damages under state law principles of joint and several liability. The plaintiffs could no longer pursue actions against these large defendants during the pendency of their bankruptcy proceedings, even though these defendants had historically been determined to be the largest contributors to asbestos-related injuries. As a result, the amount generally required to resolve each claim against Garlock increased.

     Almost all of the high-profile defendants that sought bankruptcy relief in the early 2000s have now emerged, or are positioning to emerge, from bankruptcy. Their asbestos liabilities have been assumed by wealthy trusts created in the bankruptcies with assets contributed by the emerging former defendants and their affiliates. With the emergence of these companies from bankruptcy, plaintiffs may seek to recover damages from the trusts. Legal principles of contribution and fundamental fairness should dictate that there be a consequent reduction in recoveries against other defendants, including Garlock, who remain subject to the civil court system. The bankruptcy trusts, however, operate pursuant to trust distribution procedures that do not permit Garlock and other tort-system co-defendants to gain access to claims against trusts and accompanying evidence of exposure to asbestos-containing products addressed by such trusts. Garlock’s current efforts to achieve meaningful asbestos reform are focused on changing the trust distribution procedures to ensure full and transparent disclosure of evidence of the identities of recipients and amounts of payments from the trusts, and to facilitate credit for those payments in state civil court proceedings. We believe Garlock’s efforts and similar efforts underway by other defendants and experts should result over time in a reduction of the value of damages claims against Garlock to account for trust recoveries and thereby reduce Garlock’s payments necessary to resolve asbestos claims. We and Garlock are reviewing Garlock’s strategy with respect to the resolution of Garlock’s asbestos claims in light of changing trends and developments, including recent developments in pending bankruptcy proceedings of former co-defendants.

     We do not believe reductions resulting from trust payments over the next several years will offset the significant decline in insurance collections available to Garlock in such years. We therefore estimate that, while total payments to defend and resolve Garlock’s asbestos claims should continue to decline each year, the cash outflows, net of insurance, will increase, perhaps significantly, beginning in 2011.

     We believe that the continued risks inherent in the tort system may also impact Garlock’s future cash outflows. Despite Garlock’s successful recent track record at trial, the risk (largely due to the exit from the civil court system of the high-profile defendants that sought bankruptcy relief in the early 2000s) of large adverse verdicts in certain jurisdictions that have historically favored claims by asbestos plaintiffs continues to impact Garlock’s ability to negotiate reduced payments. Thus, there can be no assurance that Garlock will be able to achieve significant payment reductions in the civil court system, particularly if claimants continue to have the ability to pursue claims in those plaintiff-oriented jurisdictions, target selected defendants, and obscure evidence of their exposures to the products of former co-defendants who have emerged from bankruptcy proceedings.

     We believe that, as predicted in various epidemiological studies that are publicly available, the incidence of asbestos-related disease is in decline and should continue to decline steadily over the next decade and thereafter. As a result, claims activity against Garlock should eventually decline to a level that can be paid from the cash flow from Garlock’s operations, even after Garlock exhausts available insurance coverage. However, there can be no assurance that epidemiological predictions about incidence of asbestos-related disease will prove to be accurate, or that, even if they are, there will be a commensurate decline in the number of asbestos-related claims filings against Garlock. In fact, after a significant decline in new mesothelioma filings in 2006, the number of mesothelioma claims filed against Garlock have increased in each of the last three years.

     Considering the foregoing, as well as the experience of our subsidiaries and other defendants in asbestos litigation, the likely sharing of judgments among multiple responsible defendants, bankruptcies of other defendants, and reform efforts, and given the amount of insurance coverage available to our subsidiaries from solvent insurance carriers, we believe that pending asbestos actions are not likely to have a material adverse effect on our financial condition, but could be material to our results of operations or cash flows in any given future period. We anticipate that asbestos claims will continue to be filed against Garlock. Because of (1) the uncertainty as to the number and timing of such potential future claims and the amount that will have to be paid to litigate, settle or satisfy claims, and (2) the finite amount of insurance available for future payments, future asbestos claims against Garlock could have a material adverse effect on our financial condition, results of operations and cash flows. As a result, there can be no assurance that Garlock’s asbestos liabilities will not have a material adverse effect on the Company’s financial condition.

Off Balance Sheet Arrangements

     Lease Agreements

     We have a number of operating leases primarily for real estate, equipment and vehicles. Operating lease arrangements are generally utilized to secure the use of assets from time to time if the terms and conditions of the lease or the nature of the asset makes the lease arrangement more favorable than a purchase. As of December 31, 2009, approximately $57.2 million of future minimum lease payments were outstanding under these agreements. See Note 17, “Commitments and Contingencies — Other Commitments,” to the Consolidated Financial Statements for additional disclosure.

     Debt and Capital Lease Guarantees

     At December 31, 2009, we had outstanding contingent liabilities for guaranteed debt and lease payments of $0.6 million arising from the divestiture of Crucible.

Contractual Obligations

     A summary of our contractual obligations and commitments at December 31, 2009 is as follows:

		Payments Due by Period (in millions)
						Less than												More than
Contractual Obligations		Total				1 Year				1-3 Years				3-5 Years				5 Years
Long-term debt		$	172.9			$	0.1			$	0.2			$	0.1			$	172.5
Interest on long-term debt			39.9				6.8				13.6				13.6				5.9
Operating leases			57.2				11.3				19.1				14.4				12.4
Other long-term liabilities			32.8				3.5				4.4				3.8				21.1
Total		$	302.8			$	21.7			$	37.3			$	31.9			$	211.9

     Payment for long-term debt may be accelerated under certain circumstances because the convertible debentures due in 2015 may be converted earlier, requiring payment of the principal amount thereof in cash. The payments for long-term debt shown in the table above reflect the contractual principal amount for the convertible debentures. In our Consolidated Balance Sheet, this amount is shown net of a debt discount pursuant to the applicable accounting rules. Additional discussion regarding the convertible debentures is included in this Management’s Discussion and Analysis of Financial Condition and Results of Operations in “Liquidity and Capital Resources — Capital Resources,” and in

Note 10 to the Consolidated Financial Statements. The interest on long-term debt represents the contractual interest coupon. It does not include the debt discount accretion that will also be a component of interest expense.

     Payments for other long-term liabilities are estimates of amounts that will be paid for environmental and retained liabilities of previously owned businesses included in the Consolidated Balance Sheets at December 31, 2009. These estimated payments are based on information currently known to us. However, it is possible that these estimates will vary from actual results if new information becomes available in the future or if there are changes in the facts and circumstances related to these liabilities. Additional discussion regarding these liabilities is included earlier in this Management’s Discussion and Analysis of Financial Condition and Results of Operations in “Contingencies — Environmental, Contingencies — Colt Firearms and Central Moloney,” “Contingencies — Crucible Materials Corporation,” and in Note 17 to the Consolidated Financial Statements.

     At December 31, 2009, we had a $7.2 million reserve for unrecognized tax benefits which is not reflected in the table above. Substantially all of this tax reserve is classified in other long-term liabilities and deferred income taxes in our Consolidated Balance Sheet. The table also does not include obligations under our pension and postretirement benefit plans, which are included in Note 12 to the Consolidated Financial Statements.

ITEM 7A.		QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

     We are exposed to certain market risks as part of our ongoing business operations, including risks from changes in foreign currency exchange rates and interest rates that could impact our financial condition, results of operations and cash flows. We manage our exposure to these and other market risks through normal operating and financing activities and through the use of derivative financial instruments. We intend to use derivative financial instruments as risk management tools and not for speculative investment purposes.

Interest Rate Risk

     We are exposed to interest rate risk as a result of our outstanding debt obligations. The table below provides information about our debt obligations as of December 31, 2009. The table represents principal cash flows (in millions) and related weighted average interest rates by expected (contractual) maturity dates.

		2010				2011				2012				2013				2014				Thereafter				Total				Fair Value
Fixed rate debt		$	0.1			$	0.1			$	0.1			$	0.1				—			$	172.5			$	172.9			$	175.9
Average interest rate			6.5	%			6.5	%			6.5	%			6.5	%			—				3.9	%			3.9	%

Foreign Currency Risk

     We are exposed to foreign currency risks that arise from normal business operations. These risks include the translation of local currency balances on our foreign subsidiaries’ balance sheets, intercompany loans with foreign subsidiaries and transactions denominated in foreign currencies. Our objective is to control our exposure to these risks through our normal operating activities and, where appropriate, through foreign currency forward or option contracts. The following table provides information about our outstanding foreign currency forward and option contracts as of December 31, 2009.

		Notional Amount
		Outstanding in
		Millions of U.S.
Transaction Type		Dollars (USD)				Maturity Dates		Exchange Rate Ranges
Forward Contracts
Sell British pound/buy euro		$	29.8			Jan 2010		0.887 pound/euro
Buy euro/sell US dollar			24.8			Jan 2010 — Dec 2010		1.361 to 1.506 USD/euro
Buy US dollar/sell euro			15.6			Jan 2010 — Dec 2010		1.456 to 1.503 USD/euro
Sell British pound/buy Australian dollar			14.2			Jan 2010		1.823 Australian dollar/British pound
Sell US dollar/buy Canadian Dollar			6.2			Jan 2010 — Dec 2010		1.044 to 1.045 Canadian dollar/USD
Buy US dollar/sell Australian Dollar			3.8			Jan 2010 — Dec 2010		0.882 to 0.920 USD/Australian dollar
Buy British pound/sell euro			2.7			Jan 2010 — Dec 2010		0.901 to 0.903 pound/euro
Sell US dollar/buy peso			2.6			Jan 2010 — Dec 2010		12.835 to 13.420 peso/US dollar
			99.7
Option Contracts
Buy euro/sell US dollar			6.3			Dec 2010		1.336 USD/euro
		$	106.0

ITEM 8.		FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

ENPRO INDUSTRIES, INC.
Index to Consolidated Financial Statements

		Page
Report of Independent Registered Public Accounting Firm			53
Consolidated Statements of Operations for the years ended December 31, 2009, 2008 and 2007			55
Consolidated Statements of Cash Flows for the years ended December 31, 2009, 2008 and 2007			56
Consolidated Balance Sheets as of December 31, 2009 and 2008			58
Consolidated Statements of Changes in Shareholders’ Equity for the years ended December 31, 2009, 2008 and 2007			59
Notes to Consolidated Financial Statements			60
Schedule II — Valuation and Qualifying Accounts for the years ended December 31, 2009, 2008 and 2007			102

ITEM 9.		CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

     Not applicable.

ITEM 9A.		CONTROLS AND PROCEDURES

     Disclosure Controls and Procedures

     As of the end of the period covered by this report, we carried out an evaluation, under the supervision and with the participation of our chief executive officer and chief financial officer, of the effectiveness of the design and operation of our disclosure controls and procedures. The purpose of our disclosure controls and procedures is to provide reasonable assurance that information required to be disclosed in our reports filed under the Exchange Act, including this report, is recorded, processed, summarized and reported within the time periods specified, and that such information is accumulated and communicated to our management to allow timely decisions regarding disclosure.

     Management does not expect that our disclosure controls and procedures or internal controls will prevent all errors and all fraud. A control system, no matter how well conceived or operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within the company have been detected. These inherent limitations include the realities that judgments in decision-making can be faulty and that breakdowns can occur because of simple error or mistake. Controls can also be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the controls. The design of any system of controls is

based in part on certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions. Over time, controls may become inadequate because of changes in conditions or deterioration in the degree of compliance with polices or procedures. Because of the inherent limitations in a cost-effective control system, misstatements due to error or fraud may occur and not be detected.

     Based on the controls evaluation, our chief executive officer and chief financial officer have concluded that our disclosure controls and procedures are effective to reasonably ensure that information required to be disclosed in our reports filed under the Exchange Act is recorded, processed, summarized and reported within the time periods specified, and that management will be timely alerted to material information required to be included in our periodic reports filed with the Securities and Exchange Commission.

     In addition, no change in our internal control over financial reporting has occurred during the quarter ended December 31, 2009 that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

Management’s Report on Internal Control over Financial Reporting

     Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Rule 13a-15(f) under the Exchange Act. Our internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with policies and procedures may deteriorate. Therefore, even those systems determined to be effective can provide only reasonable assurance with respect to financial statement preparation and presentation.

     We carried out an evaluation, under the supervision and with the participation of our chief executive officer and our chief financial officer, of the effectiveness of our internal control over financial reporting as of the end of the period covered by this report. In making this assessment, we used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in Internal Control-Integrated Framework. Based on our assessment, we have concluded that, as of December 31, 2009, our internal control over financial reporting was effective based on those criteria.

     The effectiveness of our internal control over financial reporting as of December 31, 2009, has been audited by PricewaterhouseCoopers LLP, an independent registered public accounting firm, as stated in their report which appears in this Annual Report on Form 10-K.

ITEM 9B.		OTHER INFORMATION

     On March 1, 2010, we completed the previously announced sale of our Quincy Compressor business unit, other than the equity interests in Kunshan Q-Tech Air Systems Technologies Ltd., our operation in China (“Q-Tech”), pursuant to a Purchase Agreement dated as of December 18, 2009 (the “Purchase Agreement”) with Fulcrum Acquisition LLC and Atlas Copco (China) Investment Company Ltd., subsidiaries of Atlas Copco AB (the “Buyers”). Completion of the sale to the Buyers of 100% of the equity interests in Q-Tech is pending receipt of necessary regulatory authorizations in China. The aggregate base purchase price for the assets sold on March 1, 2010 was approximately $184.2 million in cash and the assumption of certain liabilities of the Quincy Compressor business unit, and an additional

approximately $5.8 million is payable in cash upon the closing of the sale of Q-Tech (or at December 18, 2010 if the sale of Q-Tech is not completed by that date). In each case, the purchase price is subject to adjustment based on the closing date amount of specified assets transferred and liabilities assumed as set forth in the Purchase Agreement. In addition, pursuant to the Purchase Agreement we retained, and have agreed to indemnify the Buyers from, certain liabilities, including liabilities related to asbestos claims and specified environmental liabilities, union pension and existing retiree benefit liabilities, and governmental actions and specified legal proceedings.

     The Purchase Agreement was filed as Exhibit 10.1 to our Form 8-K filed with the Securities and Exchange Commission on December 21, 2009 and is incorporated by reference herein. In reviewing the Purchase Agreement, please remember that it is included to provide information regarding its terms and is not intended to provide any other factual or disclosure information about the parties thereto. The Purchase Agreement contains representations and warranties, which have been made solely for the benefit of the parties to the Purchase Agreement and should not in all instances be treated as categorical statements of fact, but rather as a way of allocating the risk to one of the parties if those statements prove to be inaccurate. Moreover, the representations and warranties as stated in the Purchase Agreement do not reflect exceptions thereto as may be set forth in separate disclosure schedules exchanged by the parties in connection with the Purchase Agreement. The representations and warranties were made only as of the date of the Purchase Agreement or such other date or dates as may be specified in the Purchase Agreement and are subject to more recent developments. Accordingly, the representations and warranties as set forth in the Purchase Agreement alone may not describe the actual state of affairs as of the date they were made or at any other time.

     As indicated in Note 2 of the Notes to Consolidated Financial Statements, we have reported, for all periods presented, the financial condition, results of operations and cash flows of our Quincy Compressor business unit, including Q-Tech, as a discontinued operation in the consolidated financial statements included in this report.

PART III

ITEM 10.		DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

     Information concerning our directors and officers appearing under the captions “Election of Directors,” “Legal Proceedings,” “Corporate Governance Policies and Practices,” and information under the caption “Security Ownership of Certain Beneficial Owners and Management — Section 16(a) Beneficial Ownership Reporting Compliance” in our definitive proxy statement for the 2010 annual meeting of shareholders is incorporated herein by reference.

     We have adopted a written Code of Business Conduct that applies to all of our directors, officers and employees, including our principal executive officer, principal financial officer and principal accounting officer. The Code is available on our Internet site at www.enproindustries.com. We intend to disclose on our Internet site any substantive changes to the Code and any waivers granted under the Code to the specified officers.

ITEM 11.		EXECUTIVE COMPENSATION

     A description of the compensation of our executive officers is set forth under the caption “Executive Compensation” in our definitive proxy statement for the 2010 annual meeting of shareholders and is incorporated herein by reference.

ITEM 12.		SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

     Security ownership data appearing under the caption “Security Ownership of Certain Beneficial Owners and Management” in our definitive proxy statement for the 2010 annual meeting of shareholders is incorporated herein by reference.

     The table below contains information as of December 31, 2009, with respect to our Amended and Restated 2002 Equity Compensation Plan, the only compensation plan or arrangement (other than our tax-qualified plans) under which we have options, warrants or rights to receive equity securities authorized for issuance.

Number of Securities

Remaining Available

for Future Issuance

Number of Securities

Under

to be Issued Upon

Weighted-Average

Equity Compensation

Exercise of Outstanding

Exercise Price of

Plans (Excluding

Options, Warrants

Outstanding Options,

Securities Reflected in

and Rights

Warrants and Rights

Column (a))

Plan Category

(a)

(b)

(c)

Equity compensation plans approved by security holders

1,170,382

(1)

$11.70

(2)

1,250,835

Equity compensation plans not approved by security holders

—

—

—

Total

1,170,382

(1)

$11.70

(2)

1,250,835

     Information concerning the inducement awards granted in 2008 to our Chief Executive Officer outside of our Amended and Restated 2002 Equity Compensation Plan is incorporated by reference to the information appearing under the caption “Executive Compensation — Employment Agreement” in our definitive proxy statement for the 2010 annual meeting of shareholders.

ITEM 13.		CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

     Information concerning the independence of our directors is set forth under the caption “Corporate Governance Policies and Practices — Director Independence” in our definitive proxy statement for the 2010 annual meeting of shareholders and is incorporated herein by reference.

ITEM 14.		PRINCIPAL ACCOUNTANT FEES AND SERVICES

     Information appearing under the caption “Independent Registered Public Accounting Firm” in our definitive proxy statement for the 2010 annual meeting of shareholders is incorporated herein by reference.

PART IV

ITEM 15.		EXHIBITS AND FINANCIAL STATEMENT SCHEDULES

(a)

The following documents are filed as part of this report:

1.

Financial Statements

     The financial statements filed as part of this report are listed in Part II, Item 8 of this report on the Index to Consolidated Financial Statements.

2.

Financial Statement Schedule

     Schedule II — Valuation and Qualifying Accounts for the years ended December 31, 2009, 2008 and 2007 appears on page 102.

     Other schedules are omitted because of the absence of conditions under which they are required or because the required information is provided in the Consolidated Financial Statements or notes thereto.

3.

Exhibits

     The exhibits to this report on Form 10-K are listed in the Exhibit Index appearing on pages 48 to 52.

SIGNATURES

     Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized, in the City of Charlotte, North Carolina on this 3^rd day of March, 2010.

     Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons, or in their behalf by their duly appointed attorney-in-fact, on behalf of the registrant in the capacities and on the date indicated.

Signatures		Title		Date
/s/ Stephen E. Macadam   Stephen E. Macadam		President and Chief Executive Officer (Principal Executive Officer) and Director		March 3, 2010
/s/ William R. Holland   William R. Holland*		Chairman of the Board and Director		March 3, 2010
/s/ J. P. Bolduc   J. P. Bolduc*		Director		March 3, 2010
/s/ Peter C. Browning   Peter C. Browning*		Director		March 3, 2010
/s/ Diane C. Creel   Diane C. Creel		Director		March 3, 2010
/s/ Don DeFossett   Don DeFossett		Director		March 3, 2010
/s/ Gordon D. Harnett   Gordon D. Harnett*		Director		March 3, 2010
/s/ David L. Hauser   David L. Hauser*		Director		March 3, 2010
/s/ Wilbur J. Prezzano, Jr.   Wilbur J. Prezzano, Jr.*		Director		March 3, 2010

EXHIBIT INDEX

2.1		Purchase Agreement dated as of December 18, 2009 among EnPro Industries, Inc., Coltec Industries Inc, Fulcrum Acquisition LLC and Atlas Copco (China) Investment Company Ltd. (incorporated by reference to Exhibit 10.1 to the Form 8-K of EnPro Industries, Inc. on December 21, 2009 (File No. 001-31225))
3.1		Restated Articles of Incorporation of EnPro Industries, Inc. (incorporated by reference to Exhibit 3.1 to the Form 10-Q for the period ended June 30, 2008 filed by EnPro Industries, Inc. (File No. 001-31225))
3.2		Amended Bylaws of EnPro Industries, Inc. (incorporated by reference to Exhibit 99.1 to the Form 8-K dated December 12, 2007 filed by EnPro Industries, Inc. (File No. 001-31225))
4.1		Form of certificate representing shares of common stock, par value $0.01 per share, of EnPro Industries, Inc. (incorporated by reference to Amendment No. 4 of the Registration Statement on Form 10 of EnPro Industries, Inc. (File No. 001-31225))
4.2		Rights Agreement between EnPro Industries, Inc. and The Bank of New York, as rights agent (incorporated by reference to Exhibit 4.7 to the Registration Statement on Form S-8 filed by EnPro Industries, Inc., the EnPro Industries, Inc. Retirement Savings Plan for Hourly Workers and the EnPro Industries, Inc. Retirement Savings Plan for Salaried Workers (File No. 333-89576))
4.5		Indenture dated as of October 26, 2005 between EnPro Industries, Inc. and Wachovia Bank, National Association, as trustee (incorporated by reference to Exhibit 10.1 to the Form 8-K dated October 26, 2005 filed by EnPro Industries, Inc. (File No. 001-31225))
10.1		Form of Indemnification Agreement for directors and officers (incorporated by reference to Exhibit 10.5 to Amendment No. 3 of the Registration Statement on Form 10 of EnPro Industries, Inc. (File No. 001-31225))
10.2+		EnPro Industries, Inc. 2002 Equity Compensation Plan (2009 Amendment and Restatement) (incorporated by reference to Appendix A to the Proxy Statement on Schedule 14A filed on March 24, 2009 by EnPro Industries, Inc. (File No. 001-31225))
10.3+		EnPro Industries, Inc. Senior Executive Annual Performance Plan (incorporated by reference to Appendix A to the Proxy Statement on Schedule 14A dated March 22, 2007 filed by EnPro Industries, Inc. (File No. 001-31225))
10.4+		EnPro Industries, Inc. Long-Term Incentive Plan (incorporated by reference to Appendix B to the Proxy Statement on Schedule 14A dated March 22, 2007 filed by EnPro Industries, Inc. (File No. 001-31225))
10.5+		Form of EnPro Industries, Inc. Long-Term Incentive Plan Award Grant (incorporated by reference to Exhibit 10.5 to the Form 10-K for the year ended December 31, 2007 filed by EnPro Industries, Inc. (File No. 001-31225))
10.6+		Form of EnPro Industries, Inc. Phantom Share Award Grant for Outside Directors (2005 Amendment and Restatement) (incorporated by reference to Exhibit 10.6 to the Form 10-K for the year ended December 31, 2007 filed by EnPro Industries, Inc. (File No. 001-31225))

10.7+		Form of EnPro Industries, Inc. Restricted Share Award Agreement (incorporated by reference to Exhibit 10.1 to the Form 8-K dated February 14, 2008 filed by EnPro Industries, Inc. (File No. 001-31225))
10.8+		Form of EnPro Industries, Inc. Restricted Share Units Award Agreement (incorporated by reference to Exhibit 10.1 to the Form 8-K dated April 29, 2009 filed by EnPro Industries, Inc. (File No. 001-31225))
10.9+*		Form of EnPro Industries, Inc. Restricted Share Units Award Agreement.
10.10+		EnPro Industries, Inc. Defined Benefit Restoration Plan (amended and restated effective as of January 1, 2007) (incorporated by reference to Exhibit 10.25 to the Form 10-K for the year ended December 31, 2006 filed by EnPro Industries, Inc. (File No. 001-31225))
10.11+*		EnPro Industries, Inc. Deferred Compensation Plan (as amended and restated effective October 27, 2009)
10.12+		EnPro Industries, Inc. Deferred Compensation Plan for Non-Employee Directors (as amended and restated effective February 12, 2008) (incorporated by reference to Exhibit 10.1 to the Form 10-Q for the period ended March 31, 2008 filed by EnPro Industries, Inc. (File No. 001-31225))
10.13+		EnPro Industries, Inc. Outside Directors’ Phantom Share Plan (incorporated by reference to Exhibit 10.14 to the Form 10-K for the year ended December 31, 2002 filed by EnPro Industries, Inc. (File No. 001-31225))
10.14		Amended and Restated Loan and Security Agreement, dated April 26, 2006 by and among Coltec Industries Inc, Coltec Industrial Products LLC, Garlock Sealing Technologies LLC, GGB LLC, Corrosion Control Corporation and Stemco LP, as Borrowers; EnPro Industries, Inc., as Parent; QFM Sales and Services, Inc., Coltec International Services Co, Garrison Litigation Management Group, Ltd., GGB, Inc., Garlock International Inc, Stemco Delaware LP, Stemco Holdings, Inc., Stemco Holdings Delaware, Inc. and Garlock Overseas Corporation, as Subsidiary Guarantors; the various financial institutions listed on the signature pages thereof, as Lenders; Bank of America, N.A., as Agent and Issuing Bank; and Banc of America Securities LLC, as Sole Lead Arranger and Sole Book Manager (incorporated by reference to Exhibit 10.1 to the Form 8-K dated April 26, 2006 filed by EnPro Industries, Inc. (File No. 001-31225))
10.15+		Management Continuity Agreement dated as of April 14, 2008 between EnPro Industries, Inc. and Stephen E. Macadam (incorporated by reference to Exhibit 10.13 to the Form 10-K for the year ended December 31, 2008 filed by EnPro Industries, Inc. (File No. 001-31225))
10.16+		Management Continuity Agreement dated as of August 1, 2002 between EnPro Industries, Inc. and William Dries (incorporated by reference to Exhibit 10.23 to the Form 10-K for the year ended December 31, 2002 filed by EnPro Industries, Inc. (File No. 001-31225))
10.17+		Management Continuity Agreement dated as of August 1, 2002 between EnPro Industries, Inc. and Richard L. Magee (incorporated by reference to Exhibit 10.25 to the Form 10-K for the year ended December 31, 2002 filed by EnPro Industries, Inc. (File No. 001-31225))
10.18+		Management Continuity Agreement dated as of August 1, 2002 between EnPro Industries, Inc. and Robert D. Rehley (incorporated by reference to Exhibit 10.28 to the Form 10-K for the year ended December 31, 2002 filed by EnPro Industries, Inc. (File No. 001-31225))

10.19+		Management Continuity Agreement dated as of January 30, 2006 between EnPro Industries, Inc. and J. Milton Childress II (incorporated by reference to Exhibit 10.28 to the Form 10-K for the year ended December 31, 2005 filed by EnPro Industries, Inc. (File No. 001-31225))
10.20+		Management Continuity Agreement dated as of February 11, 2009 between EnPro Industries, Inc. and Orville G. Lunking (incorporated by reference to Exhibit 10.19 to the Form 10-K for the year ended December 31, 2008 filed by EnPro Industries, Inc. (File No. 001-31225))
10.21+*		Management Continuity Agreement dated as of August 25, 2008 between EnPro Industries, Inc. and Dale A. Herold
10.22+*		Management Continuity Agreement dated as of October 27, 2009 between EnPro Industries, Inc. and Kenneth Walker
10.23+		Death Benefits Agreement dated as of December 12, 2002 between EnPro Industries, Inc. and William Dries (incorporated by reference to Exhibit 10.31 to the Form 10-K for the year ended December 31, 2002 filed by EnPro Industries, Inc. (File No. 001-31225))
10.24+		Death Benefits Agreement dated as of December 12, 2002 between EnPro Industries, Inc. and Richard L. Magee (incorporated by reference to Exhibit 10.33 to the Form 10-K for the year ended December 31, 2002 filed by EnPro Industries, Inc. (File No. 001-31225))
10.25+		Supplemental Retirement and Death Benefits Agreement dated as of November 8, 2005 between EnPro Industries, Inc. and William Dries (incorporated by reference to Exhibit 10.2 to the Form 10-Q for the quarter ended September 30, 2005 filed by EnPro Industries, Inc. (File No. 001-31225))
10.26+		Amendment to Supplemental Retirement and Death Benefits Agreement dated as of December 11, 2009 between EnPro Industries, Inc. and William Dries (incorporated by reference to Exhibit 10.1 to the Form 8-K dated December 15, 2009 filed by EnPro Industries, Inc. (File No. 001-31225))
10.27+		Supplemental Retirement and Death Benefits Agreement dated as of November 8, 2005 between EnPro Industries, Inc. and Richard L. Magee (incorporated by reference to Exhibit 10.3 to the Form 10-Q for the quarter ended September 30, 2005 filed by EnPro Industries, Inc. (File No. 001-31225))
10.28+		Amendment to Supplemental Retirement and Death Benefits Agreement dated as of December 11, 2009 between EnPro Industries, Inc. and Richard L. Magee (incorporated by reference to Exhibit 10.2 to the Form 8-K dated December 15, 2009 filed by EnPro Industries, Inc. (File No. 001-31225))
10.29+		EnPro Industries, Inc. Senior Officer Severance Plan (effective as of January 1, 2008) (incorporated by reference to Exhibit 10.25 to the Form 10-K for the year ended December 31, 2007 filed by EnPro Industries, Inc. (File No. 001-31225))
10.30		Variable Term Accelerated Share Repurchase Transaction dated March 3, 2008 between EnPro Industries, Inc. and Credit Suisse International (incorporated by reference to Exhibit 10.1 to the Form 8-K dated March 3, 2008 filed by EnPro Industries, Inc. (File No. 001-31225))
10.31		Settlement Agreement dated as of April 11, 2008 among EnPro Industries, Inc. and Steel Partners II, L.P., Steel Partners II GP LLC, Steel Partners II Master Fund L.P., Steel Partners LLC, Warren G. Lichtenstein, James R. Henderson, John J. Quicke, Kevin C. King, Don DeFosset and

		Delyle Bloomquist (incorporated by reference to Exhibit 10.1 to the Form 8-K dated April 11, 2008 filed by EnPro Industries, Inc. (File No. 001-31225))
10.32+*		Summary of Executive and Director Compensation Arrangements
10.33		Letter agreement dated December 16, 2008 by and among Coltec Industries Inc, Coltec Industrial Products LLC, Garlock Sealing Technologies LLC, GGB LLC, Corrosion Control Corporation, Stemco LP and V.W. Kaiser Engineering, Incorporated, as Borrowers; EnPro Industries, Inc., QFM Sales and Services, Inc., Coltec International Services Co., Garrison Litigation Management Group, Ltd., GGB, Inc., Garlock International Inc., Garlock Overseas Corporation, Stemco Holdings, Inc., Compressor Products Holdings, Inc. and Compressor Services Holdings, Inc., as Guarantors; the various financial institutions listed on the signature pages thereof, as Lenders; and Bank of America, N.A., in its capacity as a Lender and as collateral and administrative agent for Lenders, which letter agreement includes amendments to the Amended and Restated Loan and Security Agreement dated April 26, 2006 (incorporated by reference to Exhibit 10.28 to the Form 10-K for the year ended December 31, 2008 filed by EnPro Industries, Inc. (File No. 001-31225))
14		EnPro Industries, Inc. Code of Business Conduct (incorporated by reference to Exhibit 14 to the Form 10-K for the year ended December 31, 2002 filed by EnPro Industries, Inc. (File No. 001-31225))
21*		List of Subsidiaries
23.1*		Consent of PricewaterhouseCoopers LLP
23.2*		Consent of Bates White, LLC
24.1*		Power of Attorney from J. P. Bolduc
24.2*		Power of Attorney from Peter C. Browning
24.3*		Power of Attorney from Diane C. Creel
24.4*		Power of Attorney from Gordon D. Harnett
24.5*		Power of Attorney from David L. Hauser
24.6*		Power of Attorney from William R. Holland
24.7*		Power of Attorney from Wilbur J. Prezzano, Jr.
24.8*		Power of Attorney from Don DeFosset
31.1*		Certification of Chief Executive Officer pursuant to Rule 13a — 14(a)/15d — 14(a)
31.2*		Certification of Chief Financial Officer pursuant to Rule 13a — 14(a)/15d — 14(a)

32*		Certification pursuant to Section 1350

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Shareholders of EnPro Industries, Inc.:

In our opinion, the consolidated financial statements listed in the accompanying index present fairly, in all material respects, the financial position of EnPro Industries, Inc. and its subsidiaries at December 31, 2009 and 2008, and the results of their operations and their cash flows for each of the three years in the period ended December 31, 2009 in conformity with accounting principles generally accepted in the United States of America. In addition, in our opinion, the financial statement schedule listed in the accompanying index presents fairly, in all material respects, the information set forth therein when read in conjunction with the related consolidated financial statements. Also in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2009, based on criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). The Company’s management is responsible for these financial statements and financial statement schedule, for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in Management’s Report on Internal Control over Financial Reporting appearing under Item 9A. Our responsibility is to express opinions on these financial statements, on the financial statement schedule, and on the Company’s internal control over financial reporting based on our integrated audits. We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement and whether effective internal control over financial reporting was maintained in all material respects. Our audits of the financial statements included examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.

As discussed in Note 1 to the consolidated financial statements, the Company changed the manner in which it accounts for its convertible debt instruments that may be settled in cash on conversion effective January 1, 2009.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

/s/ PricewaterhouseCoopers LLP

Charlotte, North Carolina
March 3, 2010

PART I. FINANCIAL INFORMATION
ENPRO INDUSTRIES, INC.
CONSOLIDATED STATEMENTS OF OPERATIONS
Years Ended December 31, 2009, 2008 and 2007
(in millions, except per share data)

		2009				2008				2007
						As Adjusted				As Adjusted
						(Note 1)				(Note 1)
Net sales		$	803.0			$	993.8			$	873.8
Cost of sales			523.8				635.4				560.2
Gross profit			279.2				358.4				313.6
Operating expenses:
Selling, general and administrative expenses			224.3				241.6				209.1
Asbestos-related expenses			135.5				52.1				68.4
Goodwill impairment charge			113.1				—				—
Other operating expense (income), net			10.5				(0.3	)			6.0
			483.4				293.4				283.5
Operating income (loss)			(204.2	)			65.0				30.1
Interest expense			(12.3	)			(12.7	)			(12.5	)
Interest income			0.9				2.7				8.3
Other income (expense), net			17.4				(5.4	)			0.6
Income (loss) from continuing operations before income taxes			(198.2	)			49.6				26.5
Income tax benefit (expense)			54.6				(16.8	)			(9.3	)
Income (loss) from continuing operations			(143.6	)			32.8				17.2
Income from discontinued operations, net of taxes			4.3				17.8				17.9
Income (loss) before extraordinary item			(139.3	)			50.6				35.1
Extraordinary item, net of taxes			—				—				2.5
Net income (loss)		$	(139.3	)		$	50.6			$	37.6
Basic earnings (loss) per share:
Continuing operations		$	(7.19	)		$	1.62			$	0.81
Discontinued operations			0.22				0.88				0.84
Extraordinary item			—				—				0.12
Net income (loss) per share		$	(6.97	)		$	2.50			$	1.77
Diluted earnings (loss) per share:
Continuing operations		$	(7.19	)		$	1.56			$	0.77
Discontinued operations			0.22				0.84				0.80
Extraordinary item			—				—				0.11
Net income (loss) per share		$	(6.97	)		$	2.40			$	1.68

See notes to Consolidated Financial Statements.

ENPRO INDUSTRIES, INC.
CONSOLIDATED STATEMENTS OF CASH FLOWS
Years Ended December 31, 2009, 2008 and 2007
(in millions)

		2009				2008				2007
						As Adjusted				As Adjusted
						(Note 1)				(Note 1)
OPERATING ACTIVITIES OF CONTINUING OPERATIONS
Net income (loss)		$	(139.3	)		$	50.6			$	37.6
Adjustments to reconcile net income (loss) to net cash provided by operating activities of continuing operations:
Income from discontinued operations, net of taxes			(4.3	)			(17.8	)			(17.9	)
Depreciation			27.0				26.7				25.2
Amortization			13.3				13.4				10.8
Accretion of debt discount			5.2				4.7				4.4
Goodwill impairment			113.1				—				—
Deferred income taxes			(67.7	)			(0.2	)			(9.8	)
Stock-based compensation			1.8				3.9				3.6
Excess tax benefits from stock-based compensation			—				(0.8	)			(3.8	)
Loss (gain) on sale of assets, net			0.3				(2.4	)			—
Extraordinary gain, net of taxes			—				—				(2.5	)
Change in assets and liabilities, net of effects of acquisitions of businesses:
Asbestos liabilities, net of insurance receivables			95.6				15.2				43.0
Accounts and notes receivable			29.5				10.4				(8.9	)
Inventories			(8.4	)			(11.2	)			16.1
Accounts payable			(0.2	)			(14.5	)			10.3
Other current assets and liabilities			(3.5	)			(4.8	)			(6.5	)
Other noncurrent assets and liabilities			(3.4	)			4.3				(20.3	)
Net cash provided by operating activities of continuing operations			59.0				77.5				81.3
INVESTING ACTIVITIES OF CONTINUING OPERATIONS
Purchases of property, plant and equipment			(22.1	)			(44.8	)			(43.1	)
Proceeds from sales of assets			0.3				4.2				0.3
Proceeds from liquidation of investments			7.4				10.5				—
Reclassification of investments from cash equivalents			—				—				(19.5	)
Acquisitions, net of cash acquired			(51.1	)			(33.0	)			(77.0	)
Other			(0.8	)			4.6				0.7
Net cash used in investing activities of continuing operations			(66.3	)			(58.5	)			(138.6	)
FINANCING ACTIVITIES OF CONTINUING OPERATIONS
Repayments of debt			(9.9	)			(3.7	)			(2.1	)
Common stock repurchases			—				(69.2	)			—
Proceeds from issuance of common stock			0.4				0.4				1.0
Excess tax benefits from stock-based compensation			—				0.8				3.8
Net cash provided by (used in) financing activities of continuing operations			(9.5	)			(71.7	)			2.7
CASH FLOWS OF DISCONTINUED OPERATIONS
Operating cash flows			18.1				20.7				23.5
Investing cash flows			(2.7	)			(14.7	)			(3.7	)
Financing cash flows			—				(0.4	)			—
Net cash provided by discontinued operations			15.4				5.6				19.8

		2009				2008				2007
						As Adjusted				As Adjusted
						(Note 1)				(Note 1)
Effect of exchange rate changes on cash and cash equivalents			1.9				(5.8	)			3.0
Net increase (decrease) in cash and cash equivalents			0.5				(52.9	)			(31.8	)
Cash and cash equivalents at beginning of year			76.3				129.2				161.0
Cash and cash equivalents at end of year		$	76.8			$	76.3			$	129.2
Supplemental disclosures of cash flow information:
Cash paid during the year for:
Interest		$	7.4			$	8.0			$	8.1
Income taxes		$	13.2			$	37.0			$	21.7
Asbestos-related claims and expenses, net of insurance recoveries		$	39.8			$	37.0			$	24.9