Edgar Filing: KLA TENCOR CORP

KLAC 10K 2015

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)



x	ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
	For the Fiscal Year Ended June 30, 2015



o	TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
	For the Transition Period from to

Commission File Number 000-09992

KLA-TENCOR CORPORATION

(Exact name of registrant as specified in its charter)



Delaware		04-2564110
(State or other jurisdiction of incorporation or organization)		(I.R.S. Employer Identification Number)

One Technology Drive, Milpitas, California		95035
(Address of Principal Executive Offices)		(Zip Code)

Registrant’s Telephone Number, Including Area Code: (408) 875-3000

Securities Registered Pursuant to Section 12(b) of the Act:



Title of Each Class		Name of Each Exchange on Which Registered
Common Stock, $0.001 par value per share		The NASDAQ Global Select Market



	Securities Registered Pursuant to Section 12(g) of the Act:
	None
	(Title of Class)

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes x No o

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes o No x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x No o

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes x No o

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. x

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.



Large accelerated filer x		Accelerated filer o
Non-accelerated filer o (Do not check if a smaller reporting company)		Smaller reporting company o

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes o No x

The aggregate market value of the voting and non-voting common stock held by non-affiliates of the registrant based upon the closing price of the registrant’s stock, as of December 31, 2014, was approximately $11.45 billion.

The registrant had 157,530,878 shares of common stock outstanding as of July 17, 2015.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the Proxy Statement for the 2015 Annual Meeting of Stockholders to be held on November 4, 2015 (“Proxy Statement”), and to be filed pursuant to Regulation 14A within 120 days after the registrant’s fiscal year ended June 30, 2015, are incorporated by reference into Part III of this report.

Table of Contents

INDEX



	Special Note Regarding Forward-Looking Statements	ii

PART I

Item 1.	Business	1
Item 1A.	Risk Factors	16
Item 1B.	Unresolved Staff Comments	32
Item 2.	Properties	33
Item 3.	Legal Proceedings	33
Item 4.	Mine Safety Disclosures	33

PART II

Item 5.	Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities	34
Item 6.	Selected Financial Data	36
Item 7.	Management’s Discussion and Analysis of Financial Condition and Results of Operations	37
Item 7A.	Quantitative and Qualitative Disclosures About Market Risk	58
Item 8.	Financial Statements and Supplementary Data	59
	Consolidated Balance Sheets as of June 30, 2015 and June 30, 2014	60
	Consolidated Statements of Operations for each of the three years in the period ended June 30, 2015	61
	Consolidated Statements of Comprehensive Income for each of the three years in the period ended June 30, 2015	62
	Consolidated Statements of Stockholders’ Equity for each of the three years in the period ended June 30, 2015	63
	Consolidated Statements of Cash Flows for each of the three years in the period ended June 30, 2015	64
	Notes to Consolidated Financial Statements	65
	Report of Independent Registered Public Accounting Firm	105
Item 9.	Changes in and Disagreements with Accountants on Accounting and Financial Disclosure	106
Item 9A.	Controls and Procedures	106
Item 9B.	Other Information	107

PART III

Item 10.	Directors, Executive Officers and Corporate Governance	108
Item 11.	Executive Compensation	108
Item 12.	Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters	108
Item 13.	Certain Relationships and Related Transactions, and Director Independence	108
Item 14.	Principal Accounting Fees and Services	108

PART IV

Item 15.	Exhibits, Financial Statement Schedules	109
	Signatures	110
	Schedule II Valuation and Qualifying Accounts	112
	Exhibit Index	113

Table of Contents

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

This report contains certain forward-looking statements within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934. All statements other than statements of historical fact may be forward-looking statements. You can identify these and other forward-looking statements by the use of words such as “may,” “will,” “could,” “would,” “should,” “expects,” “plans,” “anticipates,” “relies,” “believes,” “estimates,” “predicts,” “intends,” “potential,” “continue,” “thinks,” “seeks,” or the negative of such terms, or other comparable terminology. Forward-looking statements also include the assumptions underlying or relating to any of the foregoing statements. Such forward-looking statements include, among others, forecasts of the future results of our operations, including profitability; orders for our products and capital equipment generally; sales of semiconductors; the investments by our customers in advanced technologies and new materials; the allocation of capital spending by our customers (and, in particular, the percentage of spending that our customers allocate to process control); growth of revenue in the semiconductor industry, the semiconductor capital equipment industry and our business; technological trends in the semiconductor industry; future developments or trends in the global capital and financial markets; our future product offerings and product features; the success and market acceptance of new products; timing of shipment of backlog; our future product shipments and product and service revenues; our future gross margins; our future research and development expenses and selling, general and administrative expenses; our ability to successfully maintain cost discipline; international sales and operations; our ability to maintain or improve our existing competitive position; success of our product offerings; creation and funding of programs for research and development; attraction and retention of employees; results of our investment in leading edge technologies; the effects of hedging transactions; the effect of the sale of trade receivables and promissory notes from customers; our future income tax rate; future payments of dividends to our stockholders; the completion of any acquisitions of third parties, or the technology or assets thereof; benefits received from any acquisitions and development of acquired technologies; sufficiency of our existing cash balance, investments, cash generated from operations and unfunded revolving line of credit under a Credit Agreement (the “Credit Agreement”) to meet our operating and working capital requirements, including debt service and payment thereof; future dividends, and stock repurchases; our compliance with the financial covenants under the Credit Agreement; the expected timing of the completion of our global employee workforce reduction; the additional charges that we may incur in connection with our global employee workforce reduction; the expected cost savings that we expect to recognize as a result of such workforce reduction; the adoption of new accounting pronouncements; and our repayment of our approximately $3.21 billion of outstanding indebtedness.

Our actual results may differ significantly from those projected in the forward-looking statements in this report. Factors that might cause or contribute to such differences include, but are not limited to, those discussed in Item 1A, “Risk Factors” in this Annual Report on Form 10-K, as well as in Item 1, “Business” and Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in this report. You should carefully review these risks and also review the risks described in other documents we file from time to time with the Securities and Exchange Commission, including the Quarterly Reports on Form 10-Q that we will file in the fiscal year ending June 30, 2016. You are cautioned not to place undue reliance on these forward-looking statements, and we expressly assume no obligation and do not intend to update the forward-looking statements in this report after the date hereof.

Table of Contents

PART I


ITEM 1.	BUSINESS

The Company

KLA-Tencor Corporation (“KLA-Tencor” or the “Company” and also referred to as “we” or “our”) is a leading supplier of process control and yield management solutions for the semiconductor and related nanoelectronics industries. Our products are also used in a number of other high technology industries, including the light emitting diode (“LED”) and data storage industries, as well as general materials research.

Within our primary area of focus, our comprehensive portfolio of defect inspection and metrology products, and related service, software and other offerings, helps integrated circuit (“IC” or “chip”) manufacturers manage yield throughout the entire semiconductor fabrication process—from research and development (“R&D”) to final volume production. These products and offerings are designed to provide comprehensive solutions to help our customers to accelerate their development and production ramp cycles, to achieve higher and more stable semiconductor die yields, and to improve their overall profitability.

KLA-Tencor’s products and services are used by the vast majority of bare wafer, IC, lithography reticle (“reticle” or “mask”) and disk manufacturers around the world. These customers turn to us for inline wafer and IC defect monitoring, review and classification; reticle defect inspection and metrology; packaging and interconnect inspection; critical dimension (“CD”) metrology; pattern overlay metrology; film thickness, surface topography and composition measurements; measurement of in-chamber process conditions, wafer shape and stress metrology; computational lithography tools; and overall yield and fab-wide data management and analysis systems. Our advanced products, coupled with our unique yield management services, allow us to deliver the solutions our customers need to accelerate their yield learning rates and significantly reduce their risks and costs.

Certain industry and technical terms used in this section are defined in the subsection entitled “Glossary” found at the end of this Item 1.

KLA-Tencor was formed in April 1997 through the merger of KLA Instruments Corporation and Tencor Instruments, two long-time leaders in the semiconductor equipment industry that originally began operations in 1975 and 1976, respectively.

Additional information about KLA-Tencor is available on our website at www.kla-tencor.com. Our Annual Report on Form 10-K, our Quarterly Reports on Form 10-Q, Current Reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended, are available free of charge on our website as soon as reasonably practicable after we electronically file them with or furnish them to the Securities and Exchange Commission (“SEC”). Information contained on our website is not part of this Annual Report on Form 10-K or our other filings with the SEC. Additionally, these filings may be obtained through the SEC’s website (www.sec.gov), which contains reports, proxy and information statements, and other information regarding issuers that file electronically. Documents that are not available through the SEC’s website may also be obtained by mailing a request to the U.S. Securities and Exchange Commission, Office of FOIA/PA Operations, 100 F Street, NE, Washington, DC 20549, by submitting an online request to the SEC at www.sec.gov or by calling the SEC at 1-800-732-0330.

Industry

General Background

KLA-Tencor’s core focus is the semiconductor industry. The semiconductor fabrication process begins with a bare silicon wafer—a round disk that is typically 150 millimeters, 200 millimeters or 300 millimeters in diameter, about as thick as a credit card and gray in color. The process of manufacturing wafers is in itself highly sophisticated, involving the creation of large ingots of silicon by pulling them out of a vat of molten silicon. The ingots are then sliced into wafers. Prime silicon wafers are then polished to a mirror finish. Other, more specialized wafers, such as epitaxial silicon (“epi”), silicon-on-insulator (“SOI”), gallium nitride (“GaN”) and silicon carbide (“SiC”), are also common in the semiconductor industry.

Table of Contents

The manufacturing cycle of an IC is grouped into three phases: design, fabrication and testing. IC design involves the architectural layout of the circuit, as well as design verification and reticle generation. The fabrication of a chip is accomplished by depositing a series of film layers that act as conductors, semiconductors or insulators on bare wafers. The deposition of these film layers is interspersed with numerous other process steps that create circuit patterns, remove portions of the film layers, and perform other functions such as heat treatment, measurement and inspection. Most advanced chip designs require hundreds of individual steps, many of which are performed multiple times. Most chips consist of two main structures: the lower structure, typically consisting of transistors or capacitors which perform the “smart” functions of the chip; and the upper “interconnect” structure, typically consisting of circuitry which connects the components in the lower structure. When all of the layers on the wafer have been fabricated, each chip on the wafer is tested for functionality. The wafer is then cut into individual chips, and those chips that passed functional testing are packaged. Final testing is performed on all packaged chips.

Current Trends

The growth of consumer demand for mobile devices, including smartphones, tablets and wearable devices, is currently driving growth in the electronics industry and, as a result, growth in the semiconductor industry as well. Contained within each of these latest consumer devices are advanced semiconductors that are helping to enable the features consumers want in device performance, such as smaller product form factors, lower power requirements, bigger and brighter screens and speed, at a lower cost. Alongside this market growth, the industry continues to experience a high rate of change in technology, with the emergence of new techniques and architectures in production today, such as three-dimensional (“3D”) transistors, advanced patterning lithography, advanced wafer-level packaging and semiconductors with critical dimensions at 28 nanometer and below. KLA-Tencor’s inspection and measurement technologies play a key role in enabling our customers’ advanced semiconductor manufacturing processes to support these trends.

Companies that anticipate future market demands by developing and refining new technologies and manufacturing processes are better positioned to lead in the semiconductor market. Accelerating the yield ramp and maximizing production yields of high-performance devices are key goals of modern semiconductor manufacturing. Ramping to high-volume production ahead of competitors can dramatically increase the revenue an IC manufacturer realizes for a given product. During past industry cycles, semiconductor manufacturers generally contended with a few key new technologies or market trends, such as a specific design rule shrink. In today’s market, driven by consumer demand for low-cost electronic goods, the leading semiconductor manufacturers are investing in simultaneous production integration of multiple new process technologies, some requiring new substrate and film materials, new geometries, advanced lithography and advanced packaging techniques.

While many of these technologies have been adopted at the development and pilot production stages of chip manufacturing, significant challenges and risks associated with each technology have affected the adoption of these technologies into full-volume production. For example, as design rules decrease, yields become more sensitive to the size and density of defects and device performance characteristics (namely speed, capacity or power management) become more sensitive to parameters, such as line width and film thickness variation. New process materials, such as high-k dielectrics, SOI wafers and immersion lithography-capable photoresists, require extensive characterization before they can be used in the manufacturing process. Moving several of these advanced technologies into production at once only adds to the risks that chipmakers face.

The continuing evolution of semiconductor devices to smaller geometries and more complex multi-level circuitry has significantly increased the performance and cost requirements of the capital equipment used to manufacture these devices. Construction of an advanced wafer fabrication facility today can cost over $5 billion, substantially more than previous-generation facilities. In addition, chipmakers are demanding increased productivity and higher returns from their manufacturing equipment and are also seeking ways to extend the performance of their existing equipment.

By developing new process control and yield management tools that help chipmakers accelerate the adoption of these new technologies into volume production, we enable our customers to better leverage these increasingly expensive facilities and significantly improve their return on investment (“ROI”). Once customers’ production lines are operating at high volume, our tools help ensure that yields are stable and process excursions are identified for quick resolution. In addition, the move to each new generation’s smaller design rules, coupled with new materials and device innovation, has increased in-process variability, which requires an increase in inspection and metrology sampling.

Table of Contents

KLA-Tencor systems not only analyze defectivity and metrology issues at critical points in the wafer, reticle and IC manufacturing processes, but also provide information to our customers so that they can identify and address the underlying process problems. The ability to locate the source of defects and resolve the underlying process issues enables our customers to improve control over their manufacturing processes. This helps them increase their yield of high-performance parts and deliver their products to market faster—thus maximizing their profits. With our broad portfolio of application-focused technologies and our dedicated yield technology expertise, we are in position to be a key supplier of comprehensive yield management solutions for customers’ next-generation products, helping our customers respond to the challenges posed by shrinking device sizes, the transition to new production materials, new device and circuit architecture, more demanding lithography processes, and new back-end packaging techniques.

Products

KLA-Tencor is engaged primarily in the design, manufacture and marketing of process control and yield management solutions for the semiconductor and related nanoelectronics industries and provides a comprehensive portfolio of defect inspection and metrology products, and related service, software and other offerings.

KLA-Tencor’s defect inspection and metrology products and related offerings can be broadly categorized into the following groups: Chip Manufacturing, Wafer Manufacturing, Reticle Manufacturing, LED and Compound Semiconductor Manufacturing, Data Storage Media/Head Manufacturing, Microelectromechanical Systems (“MEMS”) Manufacturing, and General Purpose/Lab Applications. The more significant of these products are included in the product table at the end of this “Products” section. Every year, we introduce a number of new products; some of the new products we introduced in the fiscal year ended June 30, 2015 are described below. We also provide refurbished KLA-Tencor tools as part of our K-T Certified^TM program for customers manufacturing larger design-rule devices, as well as comprehensive service and support for our products.

Chip Manufacturing

KLA-Tencor’s comprehensive portfolio of defect inspection and metrology products, and related service, software and other offerings, helps chip manufacturers manage yield throughout the entire semiconductor fabrication process—from research and development to final volume production. These products and offerings are designed to provide comprehensive solutions to help our customers to accelerate their development and production ramp cycles, to achieve higher and more stable semiconductor die yields, and to improve their overall profitability.

Front-End Defect Inspection

KLA-Tencor’s front-end defect inspection tools cover a broad range of yield applications within the IC manufacturing environment, including: research and development; incoming wafer qualification; reticle qualification; and tool, process and line monitoring. Patterned and unpatterned wafer inspectors find particles, pattern defects and electrical issues on the front surface, back surface and edge of the wafer, allowing engineers to detect and monitor critical yield excursions. Fabs rely on our high sensitivity reticle inspection systems to identify defects in reticles at an early stage and to prevent reticle defects from printing on production wafers. The defect data generated by our inspectors is compiled and reduced to relevant root-cause and yield-analysis information with our suite of data management tools. By implementing our front-end defect inspection and analysis systems, chipmakers are able to take quick corrective action, resulting in faster yield improvement and better time to market.

In June 2015, we introduced the 8920 system, which provides high productivity inspection for a diverse range of applications, including advanced IC front-end lithography and chemical mechanical planarization (“CMP”) processes, automotive device fabrication and advanced legacy fab process control. In July 2014, we launched several front-end defect inspection products that help accelerate yield for next-generation design node devices: 2920 Series, Puma™ 9850 and Surfscan^® SP5. The 2920 Series broadband plasma patterned wafer inspection systems are used to discover and monitor defects related to design or process issues, supporting advanced IC development and ramp. The Puma™ 9850 laser scanning patterned wafer inspection system utilizes a range of operating modes to support yield-relevant defect capture for lithography and etch applications and cost-effective excursion monitoring for film and CMP process modules. The Surfscan^® SP5 unpatterned wafer inspection system utilizes deep ultra-violet (“DUV”) optical technologies and high throughput to assess incoming wafer quality, evaluate and qualify processes during R&D and monitor processes during production.

Table of Contents

The products that we launched during the fiscal year ended June 30, 2015 further strengthened our broad range of offerings that support the front-end defect inspection market. In the field of patterned wafer inspection, we offer our 2920 Series, 2910 Series, 2900 Series, 2830 Series, 2820 Series and 2810 Series systems (for broadband plasma defect inspection); our Puma^TM 9850 Series, Puma^TM 9650 Series and Puma^TM 9500 Series systems (for laser scanning defect inspection); our eS805^TM Series and eS800 Series systems (for electron-beam defect inspection); our 8 Series systems (for high productivity defect inspection); and our CIRCL^TM cluster tool (for defect inspection, review and metrology of all wafer surfaces - front side, edge and back side). In the field of unpatterned wafer and surface inspection, we offer the Surfscan^® SP5 Series and Surfscan^® SP3 Series (wafer defect inspection systems for process tool qualification and monitoring using blanket films and bare wafers); and the SURFmonitor^TM (integrated on the Surfscan^® SP5 and Surfscan^® SP3 Series), which enables surface quality measurements and capture of low-contrast defects. For reticle inspection, we offer our X5.2^TM and Teron^TM SL650 Series products, which are photomask inspection systems that allow IC fabs to qualify incoming reticles and inspect production reticles for contaminants and other process-related changes. In addition, we offer a number of other products for the front-end defect inspection market, as reflected in the product table at the conclusion of this “Products” section.

Defect Review

KLA-Tencor’s defect review systems capture high resolution images of the defects detected by inspection tools. These images enable defect classification, helping chipmakers to identify and resolve yield issues. KLA-Tencor’s suite of defect inspectors, defect review and classification tools and data management systems form a broad solution for finding, identifying and tracking yield-critical defects and process issues. In July 2014, we introduced the eDR^TM-7110, an electron-beam wafer defect review and classification system that utilizes improved automatic defect classification capability to quickly identify detected defects and produce an accurate representation of the detected defect population.

Advanced Packaging Process Control

KLA-Tencor offers standalone and cluster inspection and metrology systems for various applications in the field of advanced semiconductor packaging (i.e., at the middle and back-end of the semiconductor manufacturing process). Our CIRCL-AP™ all-surface inspection, metrology and review system supports advanced wafer-level packaging processes, such as 2.5D/3D IC integration using through silicon vias (“TSVs”), wafer-level chip scale packaging (“WLCSP”) and fan-out wafer-level packaging (“FOWLP”). Used for packaging applications associated with LEDs, MEMS, image sensors and flip-chip packaging, our WI-22x0 Series products focus on front side wafer inspection and provide feedback on wafer surface quality, quality of the wafer dicing, or quality of wafer bumps, pads and pillars. Our component inspector products inspect various semiconductor components that are handled in a tray, such as microprocessors or memory chips. Component inspection capability includes 3D coplanarity inspection, measurement of the evenness of the contacts, component height and two-dimensional (“2D”) surface inspection.

In April 2015, we introduced two systems that support advanced packaging applications: CIRCL-AP™ and the ICOS^® T830. The CIRCL-AP^TM includes the 8 Series front side defect inspection and metrology module, the CV350i edge inspection and metrology module and the Micro300 2D and 3D metrology module. It provides cost-efficient process control for a range of advanced wafer-level packaging processes. The ICOS^® T830 provides automated, optical inspection of IC packages, leveraging high sensitivity and 2D and 3D measurements to determine final package quality for a wide range of package types and sizes.

Metrology

KLA-Tencor’s array of metrology solutions addresses IC and substrate manufacturing, as well as scientific research and other applications. Precise metrology and control of pattern dimensions, film thicknesses, layer-to-layer alignment, pattern placement, surface topography and electro-optical properties are important in many industries as critical dimensions narrow, film thicknesses shrink to countable numbers of atomic layers and devices become more complex.

Table of Contents

In August 2014, we introduced our 5D™ patterning control solution which addresses five elements of patterning process control--the three geometrical dimensions of device structures, time-to-results and overall equipment efficiency. Our 5D™ patterning control solution supports advanced patterning technologies through the characterization, optimization and monitoring of fab-wide processes. During the fiscal year ended June 30, 2015, we launched several metrology products that are key components in our 5D™ patterning control solution and help accelerate the ramp of innovative patterning techniques for advanced design node devices:

Overlay Metrology

In February 2015, we introduced the Archer^TM 500LCM, a high performance overlay metrology system which provides accurate overlay error data that can be used for scanner corrections or for identification of inline excursions, helping engineers determine when to re-work wafers or adjust processes to meet patterning requirements. Offering both imaging and laser-based scatterometry measurement technologies, the Archer^TM 500LCM provides flexible overlay control for all process layers in leading-edge development and high volume production.

Film Thickness and Stress Metrology

In February 2015, we introduced the SpectraFilm™ LD10 system, which utilizes a laser-driven plasma light source to produce reliable, high-precision film measurements for a broad range of film layers, including the thin, multilayer film stacks used in forming complex device structures such as FinFETs. An infrared-based subsystem on the SpectraFilm^TM LD10 enables characterization of thick films and film stacks, such as those found in 3D NAND flash devices.

Patterned Wafer Geometry Metrology

In August 2014, we introduced the WaferSight^TM PWG system, which measures patterned wafer geometry after a wide range of IC processes, helping identify and monitor variations that can affect patterning. The WaferSight^TM PWG enables faster process ramp, overlay control, lithography focus window control and in-line process monitoring for processes such as thin films, etch, CMP and rapid thermal processing (“RTP”).

Reticle Registration Metrology

In August 2014, we introduced the LMS IPRO6 system, which is used by mask shops for comprehensive characterization of reticle pattern placement error, which is a direct contributor to wafer-level pattern overlay error. The LMS IPRO6 utilizes model-based metrology to accurately measure reticle registration for on-device pattern features and standard registration marks, producing higher sampling for better determination of mask quality.

Metrology Data Analysis

In August 2014, we introduced K-T Analyzer^® 9.0, which offers advanced, run-time data analysis for a wide range of metrology system types, including overlay, reticle registration, wafer geometry, films, critical dimension and device profile metrology systems.

The products that we launched during the fiscal year ended June 30, 2015 further strengthened our broad range of offerings that support the metrology market. The Archer^TM Series of overlay metrology tools enable characterization of overlay error on lithography process layers for advanced patterning technologies. The SpectraShape^TM family of optical CD and shape metrology systems fully characterize and monitor the critical dimensions and 3D shapes of geometrically complex features incorporated by some IC manufacturers in their latest generation devices. Finally, the SpectraFilm^TM and Aleris^TM families of film metrology tools provide reliable and precise measurement of film thickness, refractive index, stress and composition for a broad range of film layers. In addition, we offer a number of other products for the metrology market, as reflected in the product table at the conclusion of this “Products” section.

In-Situ Process Monitoring

KLA-Tencor’s SensArray^® SensorWafers are a portfolio of advanced wireless and wired temperature monitoring wafers that capture the effect of the process environment on production wafers. These SensorWafers provide unique insight into thermal uniformity and profile temperature under real production conditions. SensArray products are used in many semiconductor and flat panel display fabrication processes, including lithography, etch and deposition.

Table of Contents

Lithography Software

KLA-Tencor’s PROLITH^TM product line provides researchers at advanced IC manufacturers, lithography hardware suppliers, track companies and material providers with virtual lithography software to explore critical-feature designs, manufacturability and process-limited yield of proposed lithographic technologies without the time and expense of printing hundreds of test wafers using experimental materials and prototype process equipment. Our ProDATA™ process window analysis software tool speeds critical decision making within the IC fab by enabling fast, easy and accurate analysis of experimental data, including CD, roughness, sidewall angle, top loss and pattern collapse.

In January 2015, we introduced PROLITH^TM X5.1, which provides simulation capability for anamorphic imaging for high numerical aperture extreme ultraviolet (“EUV”) lithography, and supports all lithography technologies, including 193nm immersion lithography, spacer-based Self-Aligned Double Patterning ("SADP") and thick resist lithography for 3D interconnects and MEMS manufacturing. In May 2015, we released the latest version of our process window analysis software tool, ProDATA™ V2.0, which provides engineers with a systematic, robust approach to understanding and optimizing lithography processes across the IC fab.

Wafer Manufacturing

KLA-Tencor’s portfolio of products focused on the demands of wafer manufacturers includes inspection, metrology and data management systems. Specialized inspection tools assess surface quality and detect, count and bin defects during the wafer manufacturing process and as a critical part of outgoing inspection. Wafer geometry tools ensure that the wafer is extremely flat and uniform in thickness, with precisely controlled surface topography. Specifications for wafer defectivity, geometry and surface quality are tightening as the dimensions of transistors become so small that the geometry of the substrate can substantially affect transistor performance.

Our wafer inspection portfolio is anchored by the Surfscan^® SP3 Series defect inspection systems designed to enable development and production monitoring of polished wafers, epi wafers and engineered substrates. The SURFmonitor^TM module characterizes wafer surface quality and captures the low-contrast defects. The WaferSight^TM platform offers bare wafer geometry and nanotopography metrology capabilities. Other products that we offer for the wafer manufacturing market are highlighted in the product table at the conclusion of this “Products” section.

Reticle Manufacturing

Error-free reticles, or masks, are necessary to achieving high semiconductor device yields, since reticle defects can be replicated in every die on production wafers. KLA-Tencor offers high sensitivity reticle inspection and metrology systems for mask shops, designed to help them manufacture reticles that are free of pattern defects that could print on the wafers and meet pattern placement and critical dimension uniformity specifications. In August 2014, we introduced the LMS IPRO6 reticle metrology system which enables improved characterization of mask quality through accurate measurement of reticle pattern placement error for on-device pattern features in addition to standard registration marks.

Our reticle inspection portfolio includes the Teron^TM 600 Series for development and manufacturing of advanced optical and EUV masks, the TeraScan^TM 500XR system for mask shop production of reticles for the 32nm node and above and our X5.2^TM and Teron^TM SL650 products for reticle quality control capability for IC fabs. These products include the capability for mapping critical dimension uniformity across the reticle. In addition, we offer the LMS IPRO line of reticle metrology systems for measuring pattern placement error. If the pattern on the reticle is displaced from its intended location, overlay error can result on the wafer, which can lead to electrical continuity issues affecting yield, performance or reliability of the IC device.

LED and Compound Semiconductor Manufacturing

LEDs are becoming more commonly used in solid-state lighting, television and notebook backlighting, and automotive applications. As LED device makers target aggressive cost and performance targets, they place significant emphasis on improved process control and yield during the manufacturing process.

KLA-Tencor offers a portfolio of three systems to help LED manufacturers reduce production costs and increase product output: Candela^® 8620, Klarity^® LED and WI-2280. The Candela 8620 substrate and epi wafer inspection system provides automated inspection and quality control of LED substrates, detecting defects that can impact device performance, yield and field reliability. Klarity LED is an automated defect data management and analysis system for LED yield enhancement. The WI-2280 system is a patterned wafer inspection tool that is designed specifically for defect inspection and 2D metrology for LED applications.

Table of Contents

Our primary products for compound semiconductor manufacturing include Candela CS20 and the P-Series Stylus Profiler, used for the inspection of substrates, epi-layers and process films. In addition, the Candela CS920 is used by power device manufacturers for defect inspection and classification on SiC substrate and epi wafers.

Data Storage Media/Head Manufacturing

Advancements in data storage are being driven by a wave of innovative consumer electronics with small form factors and immense storage capacities, as well as an increasing need for high-volume storage options to back up modern methods of remote computing and networking (such as cloud computing). Our process control and yield management solutions are designed to enable customers to rapidly understand and resolve complex manufacturing problems, which can help improve time to market and product yields. In the front-end and back-end of thin-film head wafer manufacturing, we offer the same process control equipment that we serve to the semiconductor industry. In addition, we offer an extensive range of test equipment and surface profilers with particular strength in photolithography. In substrate and media manufacturing, we offer metrology and defect inspection solutions with KLA-Tencor’s optical surface analyzers.

MEMS Manufacturing

The increasing demand for MEMS technology is coming from diverse industries such as automotive, space and consumer electronics. MEMS have the potential to revolutionize nearly every product category by bringing together silicon-based microelectronics with micromachining technology, making possible the realization of complete systems-on-a-chip. KLA-Tencor offers tools and techniques for this emerging market, such as defect inspection and review, optical inspection and surface profiling, which were first developed for the integrated circuit industry.

General Purpose/Lab Applications

A range of industries, including general scientific and materials research and optoelectronics, require measurements of surface topography to either control their processes or research new material characteristics. Typical measurement parameters that our tools address include flatness, roughness, curvature, peak-to-valley, asperity, waviness, texture, volume, sphericity, slope, density, stress, bearing ratio and distance (mainly in the micron to nanometer range). In September 2014, we introduced the Alpha-Step^® D-500 stylus profiler designed for 2D measurements of surface topography and the Alpha-Step D-600 stylus profiler designed for high resolution 2D and 3D surface topography measurements. The two systems support a broad range of R&D and production applications.

K-T Certified

K-T Certified is our refurbished tools program that delivers fully refurbished, tested and certified KLA-Tencor tools to our customers. In addition to high-quality pre-owned 300mm and sub-200mm tools for the integrated circuit, reticle, substrate, MEMS and data storage markets, K-T Certified also offers system software and hardware performance upgrades to extend the capabilities of existing equipment. When a customer needs to move to the next manufacturing node, K-T Certified can help maximize the value of the customer’s existing assets through K-T Certified’s repurchase, trade-in and redeployment services.

K-T Services

Our K-T Services program enables our customers in all business sectors to maintain the high performance and productivity of our products through a flexible portfolio of services. Whether a manufacturing site is producing integrated circuits, wafers or reticles, K-T Services delivers yield management expertise spanning advanced technology nodes, including collaboration with customers to determine the best products and services to meet technology requirements and optimize cost of ownership. Our comprehensive services include service engineers, technical support teams and knowledge management systems; and an extensive parts network to ensure worldwide availability of parts.

Table of Contents

Product Table

The following table presents a representative list of the products that we offered during the course of the fiscal year ended June 30, 2015:



MARKETS	APPLICATIONS	PRODUCTS
Chip Manufacturing
Front-End Defect Inspection	Patterned Wafer	2920 Series, 2910 Series, 2900 Series, 2830 Series, 2820 Series, 2810 Series Puma^TM 9850, Puma 9650, Puma 9500 Series eS805^TM Series, eS800 Series
	High Productivity and All Surface	CIRCL^TM with 8 Series, CV350i, BDR300^TMand Micro300 modules 8 Series (8800, 8820, 8900, 8920)
	Unpatterned Wafer/Surface	Surfscan^® SP3 and Surfscan SP5 Series SURFmonitor^TM
	Reticle	X5.2^TM Teron^TM SL650
	Data Management	Klarity^® product family
Advanced Packaging	Wafer-Level Packaging	CIRCL-AP^TM with 8 Series, CV350i and Micro300 modules WI-22x0 Series
Advanced Packaging	Component Inspection	ICOS^® T640 and ICOS T830
Defect Review	Electron-beam	eDR^TM-7100 Series, eDR-7000 Series
Metrology	Overlay	Archer^TMSeries
	Optical CD and Shape	SpectraShape^TM product family
	Film Thickness/Index	SpectraFilm^TM product family Aleris^TMproduct family
	Wafer Geometry and Topography	WaferSight^TM Series SURFmonitor
	Ion Implant and Anneal	Therma-Probe^®
	Surface Metrology	HRP^®-350 P-Series product family
	Resistivity	RS product family
	Data Management	K-T Analyzer^®
In-Situ Process Monitoring	Lithography	SensArray^® product family
	Plasma Etch	SensArray product family
	Implant and Wet	SensArray PlasmaSuite
Lithography Software	Lithography Simulation	PROLITH^TM
Lithography Software	Process Window Analysis	ProDATA^TM

Table of Contents



MARKETS AND APPLICATIONS	PRODUCTS
Wafer Manufacturing
Surface and Defect Inspection	SurfscanSP3 Series SURFmonitor
Wafer Geometry and Nanotopography Metrology	WaferSight Series SURFmonitor
Data Management	FabVision^TM
Reticle Manufacturing
Defect Inspection	TeraScan^TMXR Teron600Series
Pattern Placement Metrology	LMS IPRO Series
LED and Compound Semiconductor Manufacturing
Patterned Wafer Inspection	WI product family
Defect Inspection (substrates and epi wafers)	Candela^® product family
Surface Metrology	P-Series product family MicroXAM Series HRP product family
Data Management	Klarity LED
Data Storage Media/Head Manufacturing
Thin-Film Head Metrology and Inspection	Aleris product family CIRCL with 8 Series, CV350i, BDR300 and Micro300 modules HRP-250 P-Series product family
Virtual Lithography	PROLITH
In-Situ Process Monitoring	SensArray product family
Transparent and Metal Substrate Inspection	Candela product family
Data Management	Klarity Defect K-T Analyzer
MEMS Manufacturing
Surface Metrology: Stylus Profiling	P-Series product family HRP product family
Surface Metrology: Optical Profiling	MicroXAM Series
Optical Inspection	8 Series (8800, 8820, 8900, 8920) WI product family
General Purpose/Lab Applications
Surface Metrology: Stylus Profiling	P-Series product family Alpha-Step^® product family HRP product family
Surface Metrology: Optical Profiling	MicroXAM Series
Process Chamber Conditions	SensArray product family

The product information shown in the tables above excludes some products that were solely offered through our K-T Certified refurbished tools program.

Table of Contents

Customers

To support our growing global customer base, we maintain a significant presence throughout Asia, the United States and Europe, staffed with local sales and applications engineers, customer and field service engineers and yield management consultants. We count among our largest customers the leading semiconductor manufacturers in each of these regions.

For the fiscal years ended June 30, 2015, 2014 and 2013, the following customers each accounted for more than 10% of total revenues:



Year ended June 30,
2015	2014	2013
Intel Corporation	Intel Corporation	Intel Corporation
Samsung Electronics Co., Ltd.	Samsung Electronics Co., Ltd.	Taiwan Semiconductor Manufacturing Company Limited
Taiwan Semiconductor Manufacturing Company Limited	Taiwan Semiconductor Manufacturing Company Limited

Our business depends upon the capital expenditures of semiconductor manufacturers, which in turn is driven by the current and anticipated market demand for ICs and products utilizing ICs. We do not consider our business to be seasonal in nature, but it is cyclical with respect to the capital equipment procurement practices of semiconductor manufacturers, and it is impacted by the investment patterns of such manufacturers in different global markets. Downturns in the semiconductor industry or slowdowns in the worldwide economy as well as customer consolidation could have a material adverse effect on our future business and financial results.

Sales, Service and Marketing

Our sales, service and marketing efforts are aimed at building long-term relationships with our customers. We focus on providing a single and comprehensive resource for the full breadth of process control and yield management products and services. Our customers benefit from the simplified planning and coordination, as well as the increased equipment compatibility, which are realized as a result of dealing with a single supplier for multiple products and services. Our revenues are derived primarily from product sales, mostly through our direct sales force.

We believe that the size and location of our field sales, service and applications engineering, and marketing organizations represent a competitive advantage in our served markets. We have direct sales forces in Asia, the United States and Europe. We maintain an export compliance program that is designed to meet the requirements of the United States Departments of Commerce and State.

As of June 30, 2015, we employed approximately 2,390 full-time sales and related personnel, service engineers and applications engineers. In addition to sales and service offices in the United States, we conduct sales, marketing and services out of wholly-owned subsidiaries or branches in other countries, including Belgium, China, Germany, Israel, Japan, Singapore, South Korea and Taiwan. International revenues accounted for approximately 71%, 76% and 70% of our total revenues in the fiscal years ended June 30, 2015, 2014 and 2013, respectively. Additional information regarding our revenues from foreign operations for our last three fiscal years can be found in Note 17, “Segment Reporting and Geographic Information” to the Consolidated Financial Statements.

We believe that sales outside the United States will continue to be a significant percentage of our total revenues. Our future performance will depend, in part, on our ability to continue to compete successfully in Asia, one of the largest markets for our equipment. Our ability to compete in this area is dependent upon the continuation of favorable trading relationships between countries in the region and the United States, and our continuing ability to maintain satisfactory relationships with leading semiconductor companies in the region.

Table of Contents

International sales and operations may be adversely affected by the imposition of governmental controls, restrictions on export technology, political instability, trade restrictions, changes in tariffs and the difficulties associated with staffing and managing international operations. In addition, international sales may be adversely affected by the economic conditions in each country and by fluctuations in currency exchange rates, and such fluctuations may negatively impact our ability to compete on price with local providers or the value of revenues we generate from our international business. Although we attempt to manage some of the currency risk inherent in non-U.S. dollar product sales through hedging activities, there can be no assurance that such efforts will be adequate. These factors, as well as any of the other risk factors related to our international business and operations that are described in Item 1A, “Risk Factors,” could have a material adverse effect on our future business and financial results.

Backlog

Our shipment backlog for systems and associated warranty totaled $984 million and $977 million as of June 30, 2015 and 2014, respectively, and primarily consists of sales orders where written customer requests have been received and the delivery is anticipated within the next 12 months. Orders for service contracts and unreleased products are excluded from shipment backlog. All orders are subject to cancellation or delay by the customer, often with limited or no penalties. We make adjustments for shipment backlog obtained from acquired companies, sales order cancellations, customer delivery date changes and currency adjustments. Shipment backlog is not subject to normal accounting controls for information that is either reported in or derived from our consolidated financial statements. In addition, the concept of shipment backlog is not defined in the accounting literature, making comparisons between periods and with other companies difficult and potentially misleading.

Our revenue backlog, which includes the gross value of sales orders where physical deliveries have been completed, but for which revenue has not been recognized pursuant to our policy for revenue recognition, totaled $221 million and $269 million as of June 30, 2015 and 2014, respectively. Orders for service contracts are excluded from revenue backlog.

Because customers can potentially change delivery schedules or delay or cancel orders, and because some orders are received and shipped within the same quarter, our shipment backlog at any particular date is not necessarily indicative of business volumes or actual sales for any succeeding periods. The cyclicality of the semiconductor industry combined with the lead times from our suppliers sometimes result in timing disparities between, on the one hand, our ability to manufacture, deliver and install products and, on the other, the requirements of our customers. In our efforts to balance the requirements of our customers with the availability of resources, management of our operating model and other factors, we often must exercise discretion and judgment as to the timing and prioritization of manufacturing, deliveries and installations of products, which may impact the timing of revenue recognition with respect to such products.

Research and Development

The market for yield management and process monitoring systems is characterized by rapid technological development and product innovation. These technical innovations are inherently complex and require long development cycles and appropriate professional staffing. We believe that continued and timely development of new products and enhancements to existing products are necessary to maintain our competitive position. Accordingly, we devote a significant portion of our human and financial resources to research and development programs and seek to maintain close relationships with customers to remain responsive to their needs. In addition, we may enter into certain strategic development and engineering programs whereby certain government agencies or other third parties fund a portion of our research and development costs. As of June 30, 2015, we employed approximately 1,480 full-time research and development personnel.

Our key research and development activities during the fiscal year ended June 30, 2015 involved the development of process control and yield management equipment aimed at addressing the challenges posed by shrinking device sizes, the transition to new production materials, new device and circuit architecture, more demanding lithography processes and new back-end packaging techniques. For information regarding our research and development expenses during the last three fiscal years, including costs offset by our strategic development and engineering programs, see Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in this Annual Report on Form 10-K.

Table of Contents

The strength of our competitive positions in many of our existing markets is largely due to our leading technology, which is the result of our continuing significant investments in product research and development. Even during down cycles in the semiconductor industry, we have remained committed to significant engineering efforts toward both product improvement and new product development in order to enhance our competitive position. New product introductions, however, may contribute to fluctuations in operating results, since customers may defer ordering existing products, and, if new products have reliability or quality problems, those problems may result in reduced orders, higher manufacturing costs, delays in acceptance of and payment for new products, and additional service and warranty expenses. There can be no assurance that we will successfully develop and manufacture new products, or that new products introduced by us will be accepted in the marketplace. If we do not successfully introduce new products, our results of operations will be adversely affected.

Manufacturing, Raw Materials and Supplies

We perform system design, assembly and testing in-house and utilize an outsourcing strategy for the manufacture of components and major subassemblies. Our in-house manufacturing activities consist primarily of assembling and testing components and subassemblies that are acquired through third-party vendors and integrating those subassemblies into our finished products. Our principal manufacturing activities take place in the United States (Milpitas, California), Singapore, Israel, Germany and China. As of June 30, 2015, we employed approximately 970 full-time manufacturing personnel.

Some critical parts, components and subassemblies (collectively, “parts”) that we use are designed by us and manufactured by suppliers in accordance with our specifications, while other parts are standard commercial products. We use numerous vendors to supply parts and raw materials for the manufacture and support of our products. Although we make reasonable efforts to ensure that these parts and raw materials are available from multiple suppliers, this is not always possible, and certain parts and raw materials included in our systems may be obtained only from a single supplier or a limited group of suppliers. Through our business interruption planning, we endeavor to minimize the risk of production interruption by, among other things, monitoring the financial condition of suppliers of key parts and raw materials, identifying (but not necessarily qualifying) possible alternative suppliers of such parts and materials, and ensuring adequate inventories of key parts and raw materials are available to maintain manufacturing schedules.

Although we seek to reduce our dependence on sole and limited source suppliers, in some cases the partial or complete loss of certain of these sources, or disruptions within our suppliers’ often-complex supply chains, could disrupt scheduled deliveries to customers, damage customer relationships and have a material adverse effect on our results of operations.

Competition

The worldwide market for process control and yield management systems is highly competitive. In each of our product markets, we face competition from established and potential competitors, such as Applied Materials, Inc., ASML Holding N.V., Hermes Microvision, Inc., Hitachi High-Technologies Corporation and Nanometrics, Inc., some of which may have greater financial, research, engineering, manufacturing and marketing resources than we have. We may also face future competition from new market entrants from other overseas and domestic sources. We expect our competitors to continue to improve the design and performance of their current products and processes and to introduce new products and processes with improved price and performance characteristics. We believe that, to remain competitive, we will require significant financial resources to offer a broad range of products, to maintain customer service and support centers worldwide, and to invest in product and process research and development.

We believe that, while price and delivery are important competitive factors, the customers’ overriding requirement is for systems that easily and effectively incorporate automated and highly accurate inspection and metrology capabilities into their existing manufacturing processes to enhance productivity. Significant competitive factors in the market for process control and yield management systems include system performance, ease of use, reliability, interoperability with the existing installed base and technical service and support, as well as overall cost of ownership.

Management believes that we are well positioned in the market with respect to both our products and services. However, any loss of competitive position could negatively impact our prices, customer orders, revenues, gross margins and market share, any of which would negatively impact our operating results and financial condition.

Table of Contents

Acquisitions and Alliances

We continuously evaluate strategic acquisitions and alliances to expand our technologies, product offerings and distribution capabilities. Acquisitions involve numerous risks, including management issues and costs in connection with integration of the operations, technologies and products of the acquired companies, and the potential loss of key employees of the acquired companies. The inability to manage these risks effectively could negatively impact our operating results and financial condition.

Patents and Other Proprietary Rights

We protect our proprietary technology through reliance on a variety of intellectual property laws, including patent, copyright and trade secret. We have filed and obtained a number of patents in the United States and abroad and intend to continue pursuing the legal protection of our technology through intellectual property laws. In addition, from time to time we acquire license rights under United States and foreign patents and other proprietary rights of third parties, and we attempt to protect our trade secrets and other proprietary information through confidentiality and other agreements with our customers, suppliers, employees and consultants and through other security measures.

Although we consider patents and other intellectual property significant to our business, due to the rapid pace of innovation within the process control and yield management systems industry, we believe that our protection through patent and other intellectual property rights is less important than factors such as our technological expertise, continuing development of new systems, market penetration, installed base and the ability to provide comprehensive support and service to customers worldwide.

No assurance can be given that patents will be issued on any of our applications, that license assignments will be made as anticipated, or that our patents, licenses or other proprietary rights will be sufficiently broad to protect our technology. No assurance can be given that any patents issued to or licensed by us will not be challenged, invalidated or circumvented or that the rights granted thereunder will provide us with a competitive advantage. In addition, there can be no assurance that we will be able to protect our technology or that competitors will not be able to independently develop similar or functionally competitive technology.

Environmental Matters

We are subject to a variety of federal, state and local governmental laws and regulations related to the protection of the environment, including without limitation the management of hazardous materials that we use in our business operations. Compliance with these environmental laws and regulations has not had, and is not expected to have, a material effect on our capital expenditures, financial condition, results of operations or competitive position.

However, any failure to comply with environmental laws and regulations may subject us to a range of consequences, including fines, suspension of certain of our business activities, limitations on our ability to sell our products, obligations to remediate environmental contamination, and criminal and civil liabilities or other sanctions. In addition, changes in environmental laws and regulations could require us to invest in potentially costly pollution control equipment, alter our manufacturing processes or use substitute materials. Our failure to comply with these laws and regulations could subject us to future liabilities.

Employees

As of June 30, 2015, we employed approximately 5,880 full-time employees. Except for our employees in Belgium (where a trade union delegation has been recognized) and our employees in the German operations of our MIE business unit (who are represented by employee works council), none of our employees are represented by a labor union. We have not experienced work stoppages and believe that our employee relations are good.

Competition is intense in the recruiting of personnel in the semiconductor and semiconductor equipment industry. We believe that our future success will depend, in part, on our continued ability to hire and retain qualified management, marketing and technical employees.

As discussed in our Note 15, “Restructuring Charges,” we announced in April 2015 a plan to reduce our global workforce to streamline our organization and business processes in response to changing customer requirements in our industry. The goals of this reduction are to enable continued innovation, direct our resources toward our best opportunities and lower our ongoing expense run rate. Refer to the above footnote for additional details.

Table of Contents

Glossary

This section provides definitions for certain industry and technical terms commonly used in our business, which are used elsewhere in this Item 1:



back-end		Process steps that make up the second half of the semiconductor manufacturing process, from contact through completion of the wafer prior to electrical test.

broadband		An illumination source with a wide spectral bandwidth.

critical dimension (CD)		The dimension of a specified geometry (such as the width of a patterned line or the distance between two lines) that must be within design tolerances in order to maintain semiconductor device performance consistency.

design rules		Rules that set forth the allowable dimensions of particular features used in the design and layout of integrated circuits.

die		The term for a single semiconductor chip on a wafer.

electron-beam		An illumination source comprised of a stream of electrons emitted by a single source.

epitaxial silicon (epi)		A substrate technology based on growing a crystalline silicon layer on top of a silicon wafer. The added layer, where the structure and orientation are matched to those of the silicon wafer, includes dopants (impurities) to imbue the substrate with special electronic properties.

excursion		For a manufacturing step or process, a deviation from normal operating conditions that can lead to decreased performance or yield of the final product.

fab		The main manufacturing facility for processing semiconductor wafers.

front-end		The processes that make up the first half of the semiconductor manufacturing process, from wafer start through final contact window processing.

in-situ		Refers to processing steps or tests that are done without moving the wafer. Latin for “in original position.”

interconnect		A highly conductive material, usually copper or aluminum, that carries electrical signals to different parts of a die.

lithography		A process in which a masked pattern is projected onto a photosensitive coating that covers a substrate.

mask shop		A manufacturer that produces the reticles used by semiconductor manufacturers.

metrology		The science of measurement to determine dimensions, quantity or capacity. In the semiconductor industry, typical measurements include critical dimension, overlay and film thickness.

microelectromechanical systems (MEMS)		Micron-sized mechanical devices powered by electricity, created using processes similar to those used to manufacture IC devices.

micron		A metric unit of linear measure that equals 1/1,000,000 meter (10^-6m), or 10,000 angstroms (the diameter of a human hair is approximately 75 microns).

nanometer (nm)		One billionth (10^-9) of a meter.

narrowband		An illumination source with a narrow spectral bandwidth, such as a laser.

patterned		For semiconductor manufacturing and industries using similar processing technologies, refers to substrates that have electronic circuits (transistors, interconnects, etc.) fabricated on the surface.

Table of Contents




photoresist		A radiation-sensitive material that, when properly applied to a variety of substrates and then properly exposed and developed, masks portions of the substrate with a high degree of integrity.

process control		The ability to maintain specifications of products and equipment during manufacturing operations.

reticle		A very flat glass plate that contains the patterns to be reproduced on a wafer.

silicon-on-insulator (SOI)		A substrate technology comprised of a thin top silicon layer separated from the silicon substrate by a thin insulating layer of glass or silicon dioxide, used to improve performance and reduce the power consumption of IC circuits.

substrate		A wafer on which layers of various materials are added during the process of manufacturing semiconductor devices or circuits.

unpatterned		For semiconductor manufacturing and industries using similar processing technologies, refers to substrates that do not have electronic circuits (transistors, interconnects, etc.) fabricated on the surface. These can include bare silicon wafers, other bare substrates or substrates on which blanket films have been deposited.

yield management		The ability of a semiconductor manufacturer to oversee, manage and control its manufacturing processes so as to maximize the percentage of manufactured wafers or die that conform to pre-determined specifications.

__________________

The definitions above are from internal sources, as well as the SEMATECH Dictionary of Semiconductor Terms.

Table of Contents


ITEM 1A.	RISK FACTORS

A description of factors that could materially affect our business, financial condition or operating results is provided below.

Risks Associated with Our Industry

Ongoing changes in the technology industry, as well as the semiconductor industry in particular, could expose our business to significant risks.

The semiconductor equipment industry and other industries that we serve are constantly developing and changing over time. Many of the risks associated with operating in these industries are comparable to the risks faced by all technology companies, such as the uncertainty of future growth rates in the industries that we serve, pricing trends in the end-markets for consumer electronics and other products (which place a growing emphasis on our customers’ cost of ownership), changes in our customers’ capital spending patterns and, in general, an environment of constant change and development, including decreasing product and component dimensions; use of new materials; and increasingly complex device structures, applications and process steps. If we fail to appropriately adjust our cost structure and operations to adapt to any of these trends, or, with respect to technological advances, if we do not timely develop new technologies and products that successfully anticipate and address these changes, we could experience a material adverse effect on our business, financial condition and operating results.

In addition, we face a number of risks specific to ongoing changes in the semiconductor industry, as the significant majority of our sales are made to semiconductor manufacturers. Some of the trends that our management monitors in operating our business include the following:


•	the increasing cost of building and operating fabrication facilities and the impact of such increases on our customers’ investment decisions;


•	differing market growth rates and capital requirements for different applications, such as memory, logic and foundry;


•	lower level of process control adoption by our memory customers compared to our foundry and logic customers;


•	our customers’ reuse of existing and installed products, which may decrease their need to purchase new products or solutions at more advanced technology nodes;


•	the emergence of disruptive technologies that change the prevailing semiconductor manufacturing processes (or the economics associated with semiconductor manufacturing) and, as a result, also impact the inspection and metrology requirements associated with such processes;


•	the higher design costs for the most advanced integrated circuits, which could economically constrain leading-edge manufacturing technology customers to focus their resources on only the large, technologically advanced products and applications;


•	the possible introduction of integrated products by our larger competitors that offer inspection and metrology functionality in addition to managing other semiconductor manufacturing processes;


•	changes in semiconductor manufacturing processes that are extremely costly for our customers to implement and, accordingly, our customers could reduce their available budgets for process control equipment by reducing inspection and metrology sampling rates for certain technologies;


•	the reversal of the historical trend of declining cost per transistor with each new generation of technological advancement within the semiconductor industry, and the adverse impact that such reversal would have upon our business;


•	the bifurcation of the semiconductor manufacturing industry into (a) leading edge manufacturers driving continued research and development into next-generation products and technologies and (b) other manufacturers that are content with existing (including previous generation) products and technologies;


•	the ever escalating cost of next-generation product development, which may result in joint development programs between us and our customers or government entities to help fund such programs that could restrict our control of, ownership of and profitability from the products and technologies developed through those programs;


•	the potential industry transition from 300mm to 450mm wafers; and


•	the entry by some semiconductor manufacturers into collaboration or sharing arrangements for capacity, cost or risk with other manufacturers, as well as increased outsourcing of their manufacturing activities, and greater focus only on specific markets or applications, whether in response to adverse market conditions or other market pressures.

Any of the changes described above may negatively affect our customers’ rate of investment in the capital equipment that we produce, which could result in downward pressure on our prices, customer orders, revenues and gross margins. If we do not successfully manage the risks resulting from any of these or other potential changes in our industries, our business, financial condition and operating results could be adversely impacted.

Table of Contents

We are exposed to risks associated with a highly concentrated customer base.

Our customer base, particularly in the semiconductor industry, historically has been, and is becoming increasingly, highly concentrated due to corporate consolidation, acquisitions and business closures. In this environment, orders from a relatively limited number of manufacturers have accounted for, and are expected to continue to account for, a substantial portion of our sales. This increasing concentration exposes our business, financial condition and operating results to a number of risks, including the following:


•	The mix and type of customers, and sales to any single customer, may vary significantly from quarter to quarter and from year to year, which exposes our business and operating results to increased volatility tied to individual customers.


•	New orders from our foundry customers in the past several years have constituted a significant portion of our total orders. This concentration increases the impact that future business or technology changes within the foundry industry may have on our business, financial condition and operating results.


•	In a highly concentrated business environment, if a particular customer does not place an order, or if they delay or cancel orders, we may not be able to replace the business. Furthermore, because our products are configured to each customer’s specifications, any changes, delays or cancellations of orders may result in significant, non-recoverable costs.

•

As a result of this consolidation, the customers that survive the consolidation represent a greater portion of our sales and, consequently, have greater commercial negotiating leverage. Many of our large customers have more aggressive policies regarding engaging alternative, second-source suppliers for the products we offer and, in addition, may seek and, on occasion, receive pricing, payment, intellectual property-related or other commercial terms that may have an adverse impact on our business. Any of these changes could negatively impact our prices, customer orders, revenues and gross margins.

•

Certain customers have undergone significant ownership changes, created alliances with other companies, experienced management changes or have outsourced manufacturing activities, any of which may result in additional complexities in managing customer relationships and transactions. Any future change in ownership or management of our existing customers may result in similar challenges, including the possibility of the successor entity or new management deciding to select a competitor’s products.

•

The highly concentrated business environment also increases our exposure to risks related to the financial condition of each of our customers. For example, as a result of the challenging economic environment during fiscal year 2009, we were (and in some cases continue to be) exposed to additional risks related to the continued financial viability of certain of our customers. To the extent our customers experience liquidity issues in the future, we may be required to incur additional bad debt expense with respect to receivables owed to us by those customers. In addition, customers with liquidity issues may be forced to reduce purchases of our equipment, delay deliveries of our products, discontinue operations or may be acquired by one of our customers, and in either case such event would have the effect of further consolidating our customer base.

•

Semiconductor manufacturers generally must commit significant resources to qualify, install and integrate process control and yield management equipment into a semiconductor production line. We believe that once a semiconductor manufacturer selects a particular supplier’s process control and yield management equipment, the manufacturer generally relies upon that equipment for that specific production line application for an extended period of time. Accordingly, we expect it to be more difficult to sell our products to a given customer for that specific production line application and other similar production line applications if that customer initially selects a competitor’s equipment. Similarly, we expect it to be challenging for a competitor to sell its products to a given customer for a specific production line application if that customer initially selects our equipment.

•

Prices differ among the products we offer for different applications due to differences in features offered or manufacturing costs. If there is a shift in demand by our customers from our higher-priced to lower-priced products, our gross margin and revenue would decrease. In addition, when products are initially introduced, they tend to have higher costs because of initial development costs and lower production volumes relative to the previous product generation, which can impact gross margin.

Any of these factors could have a material adverse effect on our business, financial condition and operating results.

Table of Contents

The semiconductor equipment industry is highly cyclical. The purchasing decisions of our customers are highly dependent on the economies of both the local markets in which they are located and the semiconductor industry worldwide. If we fail to respond to industry cycles, our business could be seriously harmed.

The timing, length and severity of the up-and-down cycles in the semiconductor equipment industry are difficult to predict. The cyclical nature of the primary industry in which we operate is largely a function of our customers’ capital spending patterns and need for expanded manufacturing capacity, which in turn are affected by factors such as capacity utilization, consumer demand for products, inventory levels and our customers’ access to capital. This cyclicality affects our ability to accurately predict future revenue and, in some cases, future expense levels. During down cycles in our industry, the financial results of our customers may be negatively impacted, which could result not only in a decrease in, or cancellation or delay of, orders (which are generally subject to cancellation or delay by the customer with limited or no penalty) but also a weakening of their financial condition that could impair their ability to pay for our products or our ability to recognize revenue from certain customers. Our ability to recognize revenue from a particular customer may also be negatively impacted by the customer’s funding status, which could be weakened not only by adverse business conditions or inaccessibility to capital markets for any number of macroeconomic or company-specific reasons, but also by funding limitations imposed by the customer’s unique corporate structure. Any of these factors could negatively impact our business, operating results and financial condition.

When cyclical fluctuations result in lower than expected revenue levels, operating results may be adversely affected and cost reduction measures may be necessary in order for us to remain competitive and financially sound. During periods of declining revenues, we must be in a position to adjust our cost and expense structure to prevailing market conditions and to continue to motivate and retain our key employees. If we fail to respond, or if our attempts to respond fail to accomplish our intended results, then our business could be seriously harmed. Furthermore, any workforce reductions and cost reduction actions that we adopt in response to down cycles may result in additional restructuring charges, disruptions in our operations and loss of key personnel. In addition, during periods of rapid growth, we must be able to increase manufacturing capacity and personnel to meet customer demand. We can provide no assurance that these objectives can be met in a timely manner in response to industry cycles. Each of these factors could adversely impact our operating results and financial condition.

In addition, our management typically provides quarterly forecasts for certain financial metrics, which, when made, are based on business and operational forecasts that are believed to be reasonable at the time. However, largely due to the cyclicality of our business and the industries in which we operate, and the fact that business conditions in our industries can change very rapidly as part of these cycles, our actual results may vary (and have varied in the past) from forecasted results. These variations can occur for any number of reasons, including, but not limited to, unexpected changes in the volume or timing of customer orders, product shipments or product acceptances; an inability to adjust our operations rapidly enough to adapt to changing business conditions; or a different than anticipated effective tax rate. The impact on our business of delays or cancellations of customer orders may be exacerbated by the short lead times that our customers expect between order placement and product shipment. This is because order delays and cancellations may lead not only to lower revenues, but also, due to the advance work we must do in anticipation of receiving a product order in order to meet the expected lead times, to significant inventory write-offs and manufacturing inefficiencies that decrease our gross margin. Any of these factors could materially and adversely affect our financial results for a particular quarter and could cause those results to differ materially from financial forecasts we have previously provided. We provide these forecasts with the intent of giving investors and analysts a better understanding of management’s expectations for the future, but parties reviewing such forecasts must recognize that such forecasts are comprised of, and are themselves, forward-looking statements subject to the risks and uncertainties described in this Item 1A and elsewhere in this report and in our other public filings and public statements. If our operating or financial results for a particular period differ from our forecasts or the expectations of investment analysts, or if we revise our forecasts, the market price of our common stock could decline.

Table of Contents

Risks Related to Our Business Model and Capital Structure

If we do not develop and introduce new products and technologies in a timely manner in response to changing market conditions or customer requirements, our business could be seriously harmed.

Success in the semiconductor equipment industry depends, in part, on continual improvement of existing technologies and rapid innovation of new solutions. For over 25 years the primary driver of technology advancement in the semiconductor industry has been to shrink the lithography that prints the circuit design on semiconductor chips. That driver appears to be slowing, which may cause semiconductor manufacturers to delay investments in equipment, investigate more complex device architectures, use new materials and develop innovative fabrication processes. These and other evolving customer plans and needs require us to respond with continued development programs and cut back or discontinue older programs, which may no longer have industry-wide support. Technical innovations are inherently complex and require long development cycles and appropriate staffing of highly qualified employees. Our competitive advantage and future business success depend on our ability to accurately predict evolving industry standards, develop and introduce new products and solutions that successfully address changing customer needs, win market acceptance of these new products and solutions, and manufacture these new products in a timely and cost-effective manner. Our failure to accurately predict evolving industry standards and develop as well as offer competitive technology solutions in a timely manner with cost-effective products could result in loss of market share, unanticipated costs, and inventory obsolescence, which would adversely impact our business, operating results and financial condition.

In this environment, we must continue to make significant investments in research and development in order to enhance the performance, features and functionality of our products, to keep pace with competitive products and to satisfy customer demands. Substantial research and development costs typically are incurred before we confirm the technical feasibility and commercial viability of a new product, and not all development activities result in commercially viable products. There can be no assurance that revenues from future products or product enhancements will be sufficient to recover the development costs associated with such products or enhancements. In addition, we cannot be sure that these products or enhancements will receive market acceptance or that we will be able to sell these products at prices that are favorable to us. Our business will be seriously harmed if we are unable to sell our products at favorable prices or if the market in which we operate does not accept our products.

In addition, the complexity of our products exposes us to other risks. We regularly recognize revenue from a sale upon shipment of the applicable product to the customer (even before receiving the customer’s formal acceptance of that product) in certain situations, including sales of products for which installation is considered perfunctory, transactions in which the product is sold to an independent distributor and we have no installation obligations, and sales of products where we have previously delivered the same product to the same customer location and that prior delivery has been accepted. However, our products are very technologically complex and rely on the interconnection of numerous subcomponents (all of which must perform to their respective specifications), so it is conceivable that a product for which we recognize revenue upon shipment may ultimately fail to meet the overall product’s required specifications. In such a situation, the customer may be entitled to certain remedies, which could materially and adversely affect our operating results for various periods and, as a result, our stock price.

We derive a substantial percentage of our revenues from sales of defect inspection products. As a result, any delay or reduction of sales of these products could have a material adverse effect on our business, financial condition and operating results. The continued customer demand for these products and the development, introduction and market acceptance of new products and technologies are critical to our future success.

Table of Contents

Our success is dependent in part on our technology and other proprietary rights. If we are unable to maintain our lead or protect our proprietary technology, we may lose valuable assets.

Our success is dependent in part on our technology and other proprietary rights. We own various United States and international patents and have additional pending patent applications relating to some of our products and technologies. The process of seeking patent protection is lengthy and expensive, and we cannot be certain that pending or future applications will actually result in issued patents or that issued patents will be of sufficient scope or strength to provide meaningful protection or commercial advantage to us. Other companies and individuals, including our larger competitors, may develop technologies and obtain patents relating to our business that are similar or superior to our technology or may design around the patents we own, adversely affecting our business. In addition, we at times engage in collaborative technology development efforts with our customers and suppliers, and these collaborations may constitute a key component of certain of our ongoing technology and product research and development projects. The termination of any such collaboration, or delays caused by disputes or other unanticipated challenges that may arise in connection with any such collaboration, could significantly impair our research and development efforts, which could have a material adverse impact on our business and operations.

We also maintain trademarks on certain of our products and services and claim copyright protection for certain proprietary software and documentation. However, we can give no assurance that our trademarks and copyrights will be upheld or successfully deter infringement by third parties.

While patent, copyright and trademark protection for our intellectual property is important, we believe our future success in highly dynamic markets is most dependent upon the technical competence and creative skills of our personnel. We attempt to protect our trade secrets and other proprietary information through confidentiality and other agreements with our customers, suppliers, employees and consultants and through other security measures. We also maintain exclusive and non-exclusive licenses with third parties for strategic technology used in certain products. However, these employees, consultants and third parties may breach these agreements, and we may not have adequate remedies for wrongdoing. In addition, the laws of certain territories in which we develop, manufacture or sell our products may not protect our intellectual property rights to the same extent as do the laws of the United States. In any event, the extent to which we can protect our trade secrets through the use of confidentiality agreements is limited, and our success will depend to a significant extent on our ability to innovate ahead of our competitors.

Our future performance depends, in part, upon our ability to continue to compete successfully worldwide.

Our industry includes large manufacturers with substantial resources to support customers worldwide. Some of our competitors are diversified companies with greater financial resources and more extensive research, engineering, manufacturing, marketing, and customer service and support capabilities than we possess. We face competition from companies whose strategy is to provide a broad array of products and services, some of which compete with the products and services that we offer. These competitors may bundle their products in a manner that may discourage customers from purchasing our products, including pricing such competitive tools significantly below our product offerings. In addition, we face competition from smaller emerging semiconductor equipment companies whose strategy is to provide a portion of the products and services that we offer, using innovative technology to sell products into specialized markets. The strength of our competitive positions in many of our existing markets is largely due to our leading technology, which is the result of continuing significant investments in product research and development. However, we may enter new markets, whether through acquisitions or new internal product development, in which competition is based primarily on product pricing, not technological superiority. Further, some new growth markets that emerge may not require leading technologies. Loss of competitive position in any of the markets we serve, or an inability to sell our products on favorable commercial terms in new markets we may enter, could negatively affect our prices, customer orders, revenues, gross margins and market share, any of which would negatively affect our operating results and financial condition.

Table of Contents

Our business would be harmed if we do not receive parts sufficient in number and performance to meet our production requirements and product specifications in a timely and cost-effective manner.

We use a wide range of materials in the production of our products, including custom electronic and mechanical components, and we use numerous suppliers to supply these materials. We generally do not have guaranteed supply arrangements with our suppliers. Because of the variability and uniqueness of customers’ orders, we do not maintain an extensive inventory of materials for manufacturing. Through our business interruption planning, we seek to minimize the risk of production and service interruptions and/or shortages of key parts by, among other things, monitoring the financial stability of key suppliers, identifying (but not necessarily qualifying) possible alternative suppliers and maintaining appropriate inventories of key parts. Although we make reasonable efforts to ensure that parts are available from multiple suppliers, key parts may be available only from a single supplier or a limited group of suppliers. Also, key parts we obtain from some of our suppliers incorporate the suppliers’ proprietary intellectual property; in those cases we are increasingly reliant on third parties for high-performance, high-technology components, which reduces the amount of control we have over the availability and protection of the technology and intellectual property that is used in our products. In addition, if certain of our key suppliers experience liquidity issues and are forced to discontinue operations, which is a heightened risk during economic downturns, it could affect their ability to deliver parts and could result in delays for our products. Similarly, especially with respect to suppliers of high-technology components, our suppliers themselves have increasingly complex supply chains, and delays or disruptions at any stage of their supply chains may prevent us from obtaining parts in a timely manner and result in delays for our products. Our operating results and business may be adversely impacted if we are unable to obtain parts to meet our production requirements and product specifications, or if we are only able to do so on unfavorable terms. Furthermore, a supplier may discontinue production of a particular part for any number of reasons, including the supplier’s financial condition or business operational decisions, which would require us to purchase, in a single transaction, a large number of such discontinued parts in order to ensure that a continuous supply of such parts remains available to our customers. Such “end-of-life” parts purchases could result in significant expenditures by us in a particular period, and ultimately any unused parts may result in a significant inventory write-off, either of which could have a material and adverse impact on our financial condition and results of operations for the applicable periods.

If we fail to operate our business in accordance with our business plan, our operating results, business and stock price may be significantly and adversely impacted.

We attempt to operate our business in accordance with a business plan that is established annually, revised frequently (generally quarterly), and reviewed by management even more frequently (at least monthly). Our business plan is developed based on a number of factors, many of which require estimates and assumptions, such as our expectations of the economic environment, future business levels, our customers’ willingness and ability to place orders, lead-times, and future revenue and cash flow. Our budgeted operating expenses, for example, are based in part on our future revenue expectations. However, our ability to achieve our anticipated revenue levels is a function of numerous factors, including the volatile and cyclical nature of our primary industry, customer order cancellations, macroeconomic changes, operational matters regarding particular agreements, our ability to manage customer deliveries, the availability of resources for the installation of our products, delays or accelerations by customers in taking deliveries and the acceptance of our products (for products where customer acceptance is required before we can recognize revenue from such sales), our ability to operate our business and sales processes effectively, and a number of the other risk factors set forth in this Item 1A.

Because our expenses are in most cases relatively fixed in the short term, any revenue shortfall below expectations could have an immediate and significant adverse effect on our operating results. Similarly, if we fail to manage our expenses effectively or otherwise fail to maintain rigorous cost controls, we could experience greater than anticipated expenses during an operating period, which would also negatively affect our results of operations. If we fail to operate our business consistent with our business plan, our operating results in any period may be significantly and adversely impacted. Such an outcome could cause customers, suppliers or investors to view us as less stable, or could cause us to fail to meet financial analysts’ revenue or earnings estimates, any of which could have a material adverse impact on our business, financial condition or stock price.

In addition, our management is constantly striving to balance the requirements and demands of our customers with the availability of resources, the need to manage our operating model and other factors. In furtherance of those efforts, we often must exercise discretion and judgment as to the timing and prioritization of manufacturing, deliveries, installations and payment scheduling. Any such decisions may impact our ability to recognize revenue, including the fiscal period during which such revenue may be recognized, with respect to such products, which could have a material adverse effect on our business, financial condition or stock price.

Table of Contents

Our outstanding indebtedness was substantially increased in the second quarter of our fiscal year ended June 30, 2015 and, as a result, our capital structure is more highly leveraged.

As of June 30, 2015, we had approximately $3.21 billion aggregate principal amount of outstanding indebtedness, consisting of $2.50 billion aggregate principal amount of senior, unsecured long-term notes and approximately $711.3 million of term loans under a Credit Agreement (the “Credit Agreement”). Additionally, we have commitments for an unfunded revolving credit facility of $500.0 million under the Credit Agreement. We may incur additional indebtedness in the future by accessing the unfunded revolving credit facility under the Credit Agreement and/or entering into new financing arrangements. Our ability to pay interest and repay the principal of our current indebtedness is dependent upon our ability to manage our business operations, our credit rating, the ongoing interest rate environment and the other risk factors discussed in this section. There can be no assurance that we will be able to manage any of these risks successfully.

In addition, the interest rates of the senior, unsecured long-term notes may be subject to adjustments from time to time if Moody’s Investors Service, Inc. (“Moody’s”), Standard & Poor’s Ratings Services (“S&P”) or, under certain circumstances, a substitute rating agency selected by us as a replacement for Moody’s or S&P, as the case may be (a “Substitute Rating Agency”), downgrades (or subsequently upgrades) its rating assigned to the respective series of notes such that the adjusted rating is below investment grade. Accordingly, changes by Moody’s, S&P, or a Substitute Rating Agency to the rating of any series of notes, our outlook or credit rating could require us to pay additional interest, which may negatively affect the value and liquidity of our debt and the market price of our common stock could decline. Factors that can affect our credit rating include changes in our operating performance, the economic environment, conditions in the semiconductor and semiconductor equipment industries, our financial position, including the incurrence of additional indebtedness, and our business strategy.

In certain circumstances involving a change of control followed by a downgrade of the rating of a series of notes by at least two of Moody’s, S&P and Fitch Inc., unless we have exercised its right to redeem the notes of such series, we will be required to make an offer to repurchase all or, at the holder’s option, any part, of each holder’s notes of that series pursuant to the offer described below (the “Change of Control Offer”). In the Change of Control Offer, we will be required to offer payment in cash equal to 101% of the aggregate principal amount of notes repurchased plus accrued and unpaid interest, if any, on the notes repurchased, up to, but not including, the date of repurchase. We cannot make any assurance that we will have sufficient financial resources at such time or will be able to arrange financing to pay the repurchase price of that series of notes. Our ability to repurchase that series of notes in such event may be limited by law, by the indenture associated with that series of notes, or by the terms of other agreements to which we may be party at such time. If we fail to repurchase that series of notes as required by the terms of such notes, it would constitute an event of default under the indenture governing that series of notes which, in turn, may also constitute an event of default under other of our obligations.

The term loans under the Credit Agreement bear interest at a floating rate, which is based on the London Interbank Offered Rate plus a fixed spread, and, therefore, any increase in interest rates would require us to pay additional interest, which may have an adverse effect on the value and liquidity of our debt and the market price of our common stock could decline. The interest rate under the Credit Facility is also subject to an adjustment in conjunction with our credit rating downgrades or upgrades. Additionally, under the Credit Agreement, we are required to comply with affirmative and negative covenants, which include the maintenance of certain financial ratios, the details of which can be found in Note 7, “Debt.” If we fail to comply with these covenants, we will be in default and our borrowings will become immediately due and payable. There can be no assurance that we will have sufficient financial resources or we will be able to arrange financing to repay our borrowings at such time. In addition, certain of our domestic subsidiaries under the Credit Agreement are required to guarantee our borrowings under the Credit Agreement. In the event that we default on our borrowings, these domestic subsidiaries shall be liable for our borrowings, which could disrupt our operations and result in a material adverse impact on our business, financial condition or stock price.

Table of Contents

Our leveraged capital structure may adversely affect our financial condition, results of operations and earnings per share.

We completed our leveraged recapitalization transaction during the fiscal quarter ended December 31, 2014, which included raising approximately $3.25 billion in new borrowings, consisting of $2.50 billion aggregate principal amount of senior, unsecured long-term notes and approximately $750.0 million of term loans under the Credit Agreement, payment of a special cash dividend of approximately $2.76 billion and prepayment of our $750 million of existing senior notes due in 2018. Our issuance and maintenance of higher levels of indebtedness could have adverse consequences including, but not limited to:


•	a negative impact on our ability to satisfy our future obligations;


•	an increase in the portion of our cash flows that may have to be dedicated to increased interest and principal payments that may not be available for operations, working capital, capital expenditures, acquisitions, investments, dividends, stock repurchases, general corporate or other purposes;


•	an impairment of our ability to obtain additional financing in the future; and


•	obligations to comply with restrictive and financial covenants as noted in the above risk factor and Note 7, “Debt.”

Our ability to satisfy our future expenses as well as our new debt obligations will depend on our future performance, which will be affected by financial, business, economic, regulatory and other factors. Furthermore, our future operations may not generate sufficient cash flows to enable us to meet our future expenses and service our new debt obligations, which may impact our ability to manage our capital structure to preserve and maintain our investment grade rating. If our future operations do not generate sufficient cash flows, we may need to access the unfunded revolving credit facility of $500 million under the Credit Agreement or enter into new financing arrangements to obtain necessary funds. If we determine it is necessary to seek additional funding for any reason, we may not be able to obtain such funding or, if funding is available, we may not be able to obtain it on acceptable terms. Any additional borrowing under the Credit Agreement will place further pressure on us to comply with the financial covenants. If we fail to make a payment associated with our new debt obligations, we could be in default on such debt, and such a default could cause us to be in default on our other outstanding indebtedness.

There can be no assurance that we will continue to declare cash dividends at all or in any particular amounts.

Our Board of Directors first instituted a quarterly dividend during the fiscal year ended June 30, 2005. Since that time, we have announced a number of increases in the amount of our quarterly dividend level as well as payment of a special cash dividend that was declared and substantially paid in the second quarter of our fiscal year ended June 30, 2015. We intend to continue to pay quarterly dividends subject to capital availability and periodic determinations by our Board of Directors that cash dividends are in the best interest of our stockholders and are in compliance with all laws and agreements applicable to the declaration and payment of cash dividends by us. Future dividends may be affected by, among other factors: our views on potential future capital requirements for investments in acquisitions and the funding of our research and development; legal risks; stock repurchase programs; changes in federal and state income tax laws or corporate laws; changes to our business model; and our increased interest and principal payments required by our approximately $3.21 billion aggregate principal amount of outstanding indebtedness and any additional indebtedness that we may incur in the future. Our dividend payments may change from time to time, and we cannot provide assurance that we will continue to declare dividends at all or in any particular amounts. A reduction in our dividend payments could have a negative effect on our stock price.

We are exposed to risks related to our commercial terms and conditions, including our indemnification of third parties, as well as the performance of our products.

Although our standard commercial documentation sets forth the terms and conditions that we intend to apply to commercial transactions with our business partners, counterparties to such transactions may not explicitly agree to our terms and conditions. In situations where we engage in business with a third party without an explicit master agreement regarding the applicable terms and conditions, or where the commercial documentation applicable to the transaction is subject to varying interpretations, we may have disputes with those third parties regarding the applicable terms and conditions of our business relationship with them. Such disputes could lead to a deterioration of our commercial relationship with those parties, costly and time-consuming litigation, or additional concessions or obligations being offered by us to resolve such disputes, or could impact our revenue or cost recognition. Any of these outcomes could materially and adversely affect our business, financial condition and results of operations.

Table of Contents

In addition, in our commercial agreements, from time to time in the normal course of business we indemnify third parties with whom we enter into contractual relationships, including customers, suppliers and lessors, with respect to certain matters. We have agreed, under certain conditions, to hold these third parties harmless against specified losses, such as those arising from a breach of representations or covenants, other third party claims that our products when used for their intended purposes infringe the intellectual property rights of such other third parties, or other claims made against certain parties. We may be compelled to enter into or accrue for probable settlements of alleged indemnification obligations, or we may be subject to potential liability arising from our customers’ involvements in legal disputes. In addition, notwithstanding the provisions related to limitations on our liability that we seek to include in our business agreements, the counterparties to such agreements may dispute our interpretation or application of such provisions, and a court of law may not interpret or apply such provisions in our favor, any of which could result in an obligation for us to pay material damages to third parties and engage in costly legal proceedings. It is difficult to determine the maximum potential amount of liability under any indemnification obligations, whether or not asserted, due to our limited history of prior indemnification claims and the unique facts and circumstances that are likely to be involved in any particular claim. Our business, financial condition and results of operations in a reported fiscal period could be materially and adversely affected if we expend significant amounts in defending or settling any purported claims, regardless of their merit or outcomes.

We are also exposed to potential costs associated with unexpected product performance issues. Our products and production processes are extremely complex and thus could contain unexpected product defects, especially when products are first introduced. Unexpected product performance issues could result in significant costs being incurred by us, including increased service or warranty costs, providing product replacements for (or modifications to) defective products, litigation related to defective products, reimbursement for damages caused by our products, product recalls, or product write-offs or disposal costs. These costs could be substantial and could have an adverse impact upon our business, financial condition and operating results. In addition, our reputation with our customers could be damaged as a result of such product defects, which could reduce demand for our products and negatively impact our business.

Furthermore, we occasionally enter into volume purchase agreements with our larger customers, and these agreements may provide for certain volume purchase incentives, such as credits toward future purchases. We believe that these arrangements are beneficial to our long-term business, as they are designed to encourage our customers to purchase higher volumes of our products. However, these arrangements could require us to recognize a reduced level of revenue for the products that are initially purchased, to account for the potential future credits or other volume purchase incentives. As a result, these volume purchase arrangements, while expected to be beneficial to our business over time, could materially and adversely affect our results of operations in near-term periods, including the revenue we can recognize on product sales and therefore our gross margins.

In addition, we may, in limited circumstances, enter into agreements that contain customer-specific commitments on pricing, tool reliability, spare parts stocking levels, response time and other commitments. Furthermore, we may give these customers limited audit or inspection rights to enable them to confirm that we are complying with these commitments. If a customer elects to exercise its audit or inspection rights, we may be required to expend significant resources to support the audit or inspection, as well as to defend or settle any dispute with a customer that could potentially arise out of such audit or inspection. To date, we have made no significant accruals in our consolidated financial statements for this contingency. While we have not in the past incurred significant expenses for resolving disputes regarding these types of commitments, we cannot make any assurance that we will not incur any such liabilities in the future. Our business, financial condition and results of operations in a reported fiscal period could be materially and adversely affected if we expend significant amounts in supporting an audit or inspection, or defending or settling any purported claims, regardless of their merit or outcomes.

Table of Contents

There are risks associated with our receipt of government funding for research and development.

We are exposed to additional risks related to our receipt of external funding for certain strategic development programs from various governments and government agencies, both domestically and internationally. Governments and government agencies typically have the right to terminate funding programs at any time in their sole discretion, or a project may be terminated by mutual agreement if the parties determine that the project’s goals or milestones are not being achieved, so there is no assurance that these sources of external funding will continue to be available to us in the future. In addition, under the terms of these government grants, the applicable granting agency typically has the right to audit the costs that we incur, directly and indirectly, in connection with such programs. Any such audit could result in modifications to, or even termination of, the applicable government funding program. For example, if an audit were to identify any costs as being improperly allocated to the applicable program, those costs would not be reimbursed, and any such costs that had already been reimbursed would have to be refunded. We do not know the outcome of any future audits. Any adverse finding resulting from any such audit could lead to penalties (financial or otherwise), termination of funding programs, suspension of payments, fines and suspension or prohibition from receiving future government funding from the applicable government or government agency, any of which could adversely impact our operating results, financial condition and ability to operate our business.

We have recorded significant restructuring, inventory write-off and asset impairment charges in the past and may do so again in the future, which could have a material negative impact on our business.

Historically, we recorded material restructuring charges related to our prior global workforce reduction, large excess inventory write-offs, and material impairment charges related to our goodwill and purchased intangible assets. During the fiscal year ended June 30, 2015, we recorded net restructuring charges of $31.6 million of which $22.4 million was recorded in the fourth quarter of fiscal year ended June 30, 2015, primarily related to our plan to reduce our global employee workforce in order to streamline our organization and business processes in response to changing customer requirements in our industry. Such workforce changes can also temporarily reduce workforce productivity, which could be disruptive to our business and adversely affect our results of operations. In addition, we may not achieve or sustain the expected cost savings or other benefits of our restructuring plans, or do so within the expected time frame. If we again restructure our organization and business processes, implement additional cost reduction actions or discontinue certain business operations, we may take additional, potentially material, restructuring charges related to, among other things, employee terminations or exit costs. We may also be required to write-off additional inventory if our product build plans or usage of service inventory decline. Also, as our lead times from suppliers increase (due to the increasing complexity of the parts and components they provide) and the lead times demanded by our customers decrease (due to the time pressures they face when introducing new products or technology or bringing new facilities into production), we may be compelled to increase our commitments, and therefore our risk exposure, to inventory purchases to meet our customers’ demands in a timely manner, and that inventory may need to be written-off if demand for the underlying product declines for any reason. Such additional write-offs could constitute material charges.

As noted above, in the past, we recorded a material charge related to the impairment of our goodwill and purchased intangible assets. Goodwill represents the excess of costs over the net fair value of net assets acquired in a business combination. Goodwill is not amortized, but is instead tested for impairment at least annually in accordance with authoritative guidance for goodwill. Purchased intangible assets with estimable useful lives are amortized over their respective estimated useful lives using the straight-line method, and are reviewed for impairment in accordance with authoritative guidance for long-lived assets. The valuation of goodwill and intangible assets requires assumptions and estimates of many critical factors, including revenue and market growth, operating cash flows, market multiples, and discount rates. A substantial decline in our stock price, or any other adverse change in market conditions, particularly if such change has the effect of changing one of the critical assumptions or estimates we previously used to calculate the value of our goodwill or intangible assets (and, as applicable, the amount of any previous impairment charge), could result in a change to the estimation of fair value that could result in an additional impairment charge.

Any such additional material charges, whether related to restructuring or goodwill or purchased intangible asset impairment, may have a material negative impact on our operating results and related financial statements.

Table of Contents

We are exposed to risks related to our financial arrangements with respect to receivables factoring and banking arrangements.

We enter into factoring arrangements with financial institutions to sell certain of our trade receivables and promissory notes from customers without recourse. In addition, we maintain bank accounts with several domestic and foreign financial institutions, any of which may prove not to be financially viable. If we were to stop entering into these factoring arrangements, our operating results, financial condition and cash flows could be adversely impacted by delays or failures in collecting trade receivables. However, by entering into these arrangements, and by engaging these financial institutions for banking services, we are exposed to additional risks. If any of these financial institutions experiences financial difficulties or is otherwise unable to honor the terms of our factoring or deposit arrangements, we may experience material financial losses due to the failure of such arrangements or a lack of access to our funds, any of which could have an adverse impact upon our operating results, financial condition and cash flows.

We are subject to the risks of additional government actions in the event we were to breach the terms of any settlement arrangement into which we have entered.

In connection with the settlement of certain government actions and other legal proceedings related to our historical stock option practices, we have explicitly agreed as a condition to such settlements that we will comply with certain laws, such as the books and records provisions of the federal securities laws. If we were to violate any such law, we might not only be subject to the significant penalties applicable to such violation, but our past settlements may also be impacted by such violation, which could give rise to additional government actions or other legal proceedings. Any such additional actions or proceedings may require us to expend significant management time and incur significant accounting, legal and other expenses, and may divert attention and resources from the operation of our business. These expenditures and diversions, as well as an adverse resolution of any such action or proceeding, could have a material adverse effect on our business, financial condition and results of operations.

General Commercial, Operational, Financial and Regulatory Risks

We are exposed to risks associated with a weakening in the condition of the financial markets and the global economy.

The markets for semiconductors, and therefore our business, are ultimately driven by the global demand for electronic devices by consumers and businesses. Economic uncertainty frequently leads to reduced consumer and business spending, which caused our customers to decrease, cancel or delay their equipment and service orders from us in the economic slowdown during fiscal year 2009. In addition, the tightening of credit markets and concerns regarding the availability of credit that accompanied that slowdown made it more difficult for our customers to raise capital, whether debt or equity, to finance their purchases of capital equipment, including the products we sell. Reduced demand, combined with delays in our customers’ ability to obtain financing (or the unavailability of such financing), has at times in the past adversely affected our product and service sales and revenues and therefore has harmed our business and operating results, and our operating results and financial condition may again be adversely impacted if economic conditions decline from their current levels.

In addition, a decline in the condition of the global financial markets could adversely impact the market values or liquidity of our investments. Our investment portfolio includes corporate and government securities, money market funds and other types of debt and equity investments. Although we believe our portfolio continues to be comprised of sound investments due to the quality and (where applicable) credit ratings, a decline in the capital and financial markets would adversely impact the market value of our investments and their liquidity. If the market value of such investments were to decline, or if we were to have to sell some of our investments under illiquid market conditions, we may be required to recognize an impairment charge on such investments or a loss on such sales, either of which could have an adverse effect on our financial condition and operating results.

If we are unable to timely and appropriately adapt to changes resulting from difficult macroeconomic conditions, our business, financial condition or results of operations may be materially and adversely affected.

Table of Contents

A majority of our annual revenues are derived from outside the United States, and we maintain significant operations outside the United States. We are exposed to numerous risks as a result of the international nature of our business and operations.

A majority of our annual revenues are derived from outside the United States, and we maintain significant operations outside the United States. We expect that these conditions will continue in the foreseeable future. Managing global operations and sites located throughout the world presents a number of challenges, including but not limited to:


•	managing cultural diversity and organizational alignment;


•	exposure to the unique characteristics of each region in the global semiconductor market, which can cause capital equipment investment patterns to vary significantly from period to period;


•	periodic local or international economic downturns;


•	potential adverse tax consequences, including withholding tax rules that may limit the repatriation of our earnings, and higher effective income tax rates in foreign countries where we do business;


•	government controls, either by the United States or other countries, that restrict our business overseas or the import or export of semiconductor products or increase the cost of our operations;


•	compliance with customs regulations in the countries in which we do business;


•	tariffs or other trade barriers (including those applied to our products or to parts and supplies that we purchase);


•	political instability, natural disasters, legal or regulatory changes, acts of war or terrorism in regions where we have operations or where we do business;

•

fluctuations in interest and currency exchange rates. Fluctuations in currency exchange rates may adversely impact our ability to compete on price with local providers or the value of revenues we generate from our international business. Although we attempt to manage some of our near-term currency risks through the use of hedging instruments, there can be no assurance that such efforts will be adequate;


•	longer payment cycles and difficulties in collecting accounts receivable outside of the United States;


•	difficulties in managing foreign distributors (including monitoring and ensuring our distributors’ compliance with all applicable United States and local laws); and


•	inadequate protection or enforcement of our intellectual property and other legal rights in foreign jurisdictions.

Any of the factors above could have a significant negative impact on our business and results of operations.

We might be involved in claims or disputes related to intellectual property or other confidential information that may be costly to resolve, prevent us from selling or using the challenged technology and seriously harm our operating results and financial condition.

As is typical in the semiconductor equipment industry, from time to time we have received communications from other parties asserting the existence of patent rights, copyrights, trademark rights or other intellectual property rights which they believe cover certain of our products, processes, technologies or information. In addition, we occasionally receive notification from customers who believe that we owe them indemnification or other obligations related to intellectual property claims made against such customers by third parties. With respect to intellectual property infringement disputes, our customary practice is to evaluate such infringement assertions and to consider whether to seek licenses where appropriate. However, we cannot ensure that licenses can be obtained or, if obtained, will be on acceptable terms or that costly litigation or other administrative proceedings will not occur. The inability to obtain necessary licenses or other rights on reasonable terms could seriously harm our results of operations and financial condition. Furthermore, we may potentially be subject to claims by customers, suppliers or other business partners, or by governmental law enforcement agencies, related to our receipt, distribution and/or use of third-party intellectual property or confidential information. Legal proceedings and claims, regardless of their merit, and associated internal investigations with respect to intellectual property or confidential information disputes are often expensive to prosecute, defend or conduct; may divert management’s attention and other company resources; and/or may result in restrictions on our ability to sell our products, settlements on significantly adverse terms or adverse judgments for damages, injunctive relief, penalties and fines, any of which could have a significant negative effect on our business, results of operations and financial condition. There can be no assurance regarding the outcome of future legal proceedings, claims or investigations. The instigation of legal proceedings or claims, our inability to favorably resolve or settle such proceedings or claims, or the determination of any adverse findings against us or any of our employees in connection with such proceedings or claims could materially and adversely affect our business, financial condition and results of operations, as well as our business reputation.

Table of Contents

We are exposed to various risks related to the legal (including environmental), regulatory and tax environments in which we perform our operations and conduct our business.

We are subject to various risks related to compliance with new, existing, different, inconsistent or even conflicting laws, rules and regulations enacted by legislative bodies and/or regulatory agencies in the countries in which we operate and with which we must comply, including environmental, safety, antitrust, anti-corruption/anti-bribery, unclaimed property and export control regulations. Our failure or inability to comply with existing or future laws, rules or regulations, or changes to existing laws, rules or regulations (including changes that result in inconsistent or conflicting laws, rules or regulations), in the countries in which we operate could result in violations of contractual or regulatory obligations that may adversely affect our operating results, financial condition and ability to conduct our business. From time to time, we may receive inquiries or audit notices from governmental or regulatory bodies, or we may participate in voluntary disclosure programs, related to legal, regulatory or tax compliance matters, and these inquiries, notices or programs may result in significant financial cost (including investigation expenses, defense costs, assessments and penalties), reputational harm and other consequences that could materially and adversely affect our operating results and financial condition.

Our properties and many aspects of our business operations are subject to various domestic and international environmental laws and regulations, including those that control and restrict the use, transportation, emission, discharge, storage and disposal of certain chemicals, gases and other substances. Any failure to comply with applicable environmental laws, regulations or requirements may subject us to a range of consequences, including fines, suspension of certain of our business activities, limitations on our ability to sell our products, obligations to remediate environmental contamination, and criminal and civil liabilities or other sanctions. In addition, changes in environmental regulations (including regulations relating to climate change and greenhouse gas emissions) could require us to invest in potentially costly pollution control equipment, alter our manufacturing processes or use substitute (potentially more expensive and/or rarer) materials. Further, we use hazardous and other regulated materials that subject us to risks of strict liability for damages caused by any release, regardless of fault. We also face increasing complexity in our manufacturing, product design and procurement operations as we adjust to new and prospective requirements relating to the materials composition of our products, including restrictions on lead and other substances and requirements to track the sources of certain metals and other materials. The cost of complying, or of failing to comply, with these and other regulatory restrictions or contractual obligations could adversely affect our operating results, financial condition and ability to conduct our business.

In addition, we may from time to time be involved in legal proceedings or claims regarding employment, immigration, contracts, product performance, product liability, antitrust, environmental regulations, securities, unfair competition and other matters (in addition to proceedings and claims related to intellectual property matters, which are separately discussed elsewhere in this Item 1A). These legal proceedings and claims, regardless of their merit, may be time-consuming and expensive to prosecute or defend, divert management’s attention and resources, and/or inhibit our ability to sell our products. There can be no assurance regarding the outcome of current or future legal proceedings or claims, which could adversely affect our operating results, financial condition and ability to operate our business.

Recent regulations related to “conflict minerals” may force us to incur additional expenses, may result in damage to our business reputation and may adversely impact our ability to conduct our business.

Under the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010, the SEC adopted requirements for companies that use certain minerals and derivative metals (referred to as “conflict minerals,” regardless of their actual country of origin) in their products. Some of these metals are commonly used in electronic equipment and devices, including our products. These requirements require companies to annually investigate, disclose and report whether or not such metals originated from the Democratic Republic of Congo or adjoining countries. We have an extremely complex supply chain, with numerous suppliers (many of whom are not obligated to investigate their own supply chains) for the components and parts used in each of our products. As a result, we may incur significant costs to comply with the diligence and disclosure requirements, including costs related to determining the source of any of the relevant metals used in our products. In addition, because our supply chain is so complex, we may not be able to sufficiently verify the origin of all the relevant metals used in our products through the due diligence procedures that we implement, which may harm our business reputation. Though we do not anticipate that our customers will need to know our conflict mineral status to satisfy their own SEC reporting obligations (if any), we may also face difficulties in satisfying customers if they nonetheless require that we prove or certify that our products are “conflict free.” Key components and parts that can be shown to be “conflict free” may not be available to us in sufficient quantity, or at all, or may only be available at significantly higher cost to us. If we are not able to meet customer requirements, customers may choose to disqualify us as a supplier. Any of these outcomes could adversely impact our business, financial condition or operating results.

Table of Contents

We depend on key personnel to manage our business effectively, and if we are unable to attract, retain and motivate our key employees, our sales and product development could be harmed.

Our employees are vital to our success, and our key management, engineering and other employees are difficult to replace. We generally do not have employment contracts with our key employees. Further, we do not maintain key person life insurance on any of our employees. The expansion of high technology companies worldwide has increased demand and competition for qualified personnel. If we are unable to retain key personnel, or if we are not able to attract, assimilate and retain additional highly qualified employees to meet our needs in the future, our business and operations could be harmed.

We outsource a number of services to third-party service providers, which decreases our control over the performance of these functions. Disruptions or delays at our third-party service providers could adversely impact our operations.

We outsource a number of services, including our transportation, information systems management and logistics management of spare parts and certain accounting and procurement functions, to domestic and overseas third-party service providers. While outsourcing arrangements may lower our cost of operations, they also reduce our direct control over the services rendered. It is uncertain what effect such diminished control will have on the quality or quantity of products delivered or services rendered, on our ability to quickly respond to changing market conditions, or on our ability to ensure compliance with all applicable domestic and foreign laws and regulations. In addition, many of these outsourced service providers, including certain hosted software applications that we use for confidential data storage, employ “cloud computing” technology for such storage (which refers to an information technology hosting and delivery system in which data is not stored within the user’s physical infrastructure but instead is delivered to and consumed by the user as an Internet-based service). These providers’ cloud computing systems may be susceptible to “cyber incidents,” such as intentional cyber attacks aimed at theft of sensitive data or inadvertent cyber-security compromises, that are outside of our control. If we do not effectively develop and manage our outsourcing strategies, if required export and other governmental approvals are not timely obtained, if our third-party service providers do not perform as anticipated or do not adequately protect our data from cyber-related security breaches, or if there are delays or difficulties in enhancing business processes, we may experience operational difficulties (such as limitations on our ability to ship products), increased costs, manufacturing or service interruptions or delays, loss of intellectual property rights or other sensitive data, quality and compliance issues, and challenges in managing our product inventory or recording and reporting financial and management information, any of which could materially and adversely affect our business, financial condition and results of operations.

We are exposed to risks related to cybersecurity threats and cyber incidents.

In the conduct of our business, we collect, use, transmit and store data on information systems. This data includes confidential information and intellectual property belonging to us, our customers and our business partners, as well as personally-identifiable information of individuals. We allocate significant resources to network security, data encryption and other measures to protect our information systems and data from unauthorized access or misuse. Despite our ongoing efforts to enhance our network security measures, our information systems are susceptible to computer viruses, cyber-related security breaches and similar disruptions from unauthorized intrusions, tampering or misuse, and subject to the inherent vulnerabilities of network security measures. Any of these occurrences could result in disruptions to our operations; misappropriation, corruption or theft of confidential information, including intellectual property and other critical data, of KLA-Tencor, our customers and other business partners; reduced value of our investments in research, development and engineering; litigation with, or payment of damages to, third parties; reputational damage; costs to comply with regulatory inquiries or actions; data privacy issues; costs to rebuild our internal information systems; and increased cybersecurity protection and remediation costs.

We rely upon certain critical information systems for our daily business operations. Our inability to use or access our information systems at critical points in time could unfavorably impact our business operations.

Our global operations are dependent upon certain information systems, including telecommunications, the internet, our corporate intranet, network communications, email and various computer hardware and software applications. System failures or malfunctioning, such as difficulties with our customer relationship management (“CRM”) system, could disrupt our operations and our ability to timely and accurately process and report key components of our financial results. Our enterprise resource planning (“ERP”) system is integral to our ability to accurately and efficiently maintain our books and records, record transactions, provide critical information to our management, and prepare our financial statements. Any disruptions or difficulties that may occur in connection with our ERP system or other systems (whether in connection with the regular operation, periodic enhancements, modifications or upgrades of such systems or the integration of our acquired businesses into such systems) could adversely affect our ability to complete important business processes, such as the evaluation of our internal control over financial reporting pursuant to Section 404 of the Sarbanes-Oxley Act of 2002. Any of these events could have an adverse effect on our business, operating results and financial condition.

Table of Contents

Acquisitions are an important element of our strategy but, because of the uncertainties involved, we may not find suitable acquisition candidates and we may not be able to successfully integrate and manage acquired businesses. We are also exposed to risks in connection with strategic alliances into which we may enter.

In addition to our efforts to develop new technologies from internal sources, part of our growth strategy is to pursue acquisitions and acquire new technologies from external sources. As part of this effort, we may make acquisitions of, or significant investments in, businesses with complementary products, services and/or technologies. There can be no assurance that we will find suitable acquisition candidates or that acquisitions we complete will be successful. In addition, we may use equity to finance future acquisitions, which would increase our number of shares outstanding and be dilutive to current stockholders.

If we are unable to successfully integrate and manage acquired businesses or if acquired businesses perform poorly, then our business and financial results may suffer. It is possible that the businesses we have acquired, as well as businesses that we may acquire in the future, may perform worse than expected or prove to be more difficult to integrate and manage than anticipated. In addition, we may lose key employees of the acquired companies. As a result, risks associated with acquisition transactions may give rise to a material adverse effect on our business and financial results for a number of reasons, including:


•	we may have to devote unanticipated financial and management resources to acquired businesses;


•	the combination of businesses may cause the loss of key personnel or an interruption of, or loss of momentum in, the activities of our company and/or the acquired business;


•	we may not be able to realize expected operating efficiencies or product integration benefits from our acquisitions;


•	we may experience challenges in entering into new market segments for which we have not previously manufactured and sold products;


•	we may face difficulties in coordinating geographically separated organizations, systems and facilities;


•	the customers, distributors, suppliers, employees and others with whom the companies we acquire have business dealings may have a potentially adverse reaction to the acquisition;


•	we may have to write-off goodwill or other intangible assets; and


•	we may incur unforeseen obligations or liabilities in connection with acquisitions.

At times, we may also enter into strategic alliances with customers, suppliers or other business partners with respect to development of technology and intellectual property. These alliances typically require significant investments of capital and exchange of proprietary, highly sensitive information. The success of these alliances depends on various factors over which we may have limited or no control and requires ongoing and effective cooperation with our strategic partners. Mergers and acquisitions and strategic alliances are inherently subject to significant risks, and the inability to effectively manage these risks could materially and adversely affect our business, financial condition and operating results.

Disruption of our manufacturing facilities or other operations, or in the operations of our customers, due to earthquake, flood, other natural catastrophic events, health epidemics or terrorism could result in cancellation of orders, delays in deliveries or other business activities, or loss of customers and could seriously harm our business.

We have significant manufacturing operations in the United States, Singapore, Israel, Germany and China. In addition, our business is international in nature, with our sales, service and administrative personnel and our customers located in numerous countries throughout the world. Operations at our manufacturing facilities and our assembly subcontractors, as well as our other operations and those of our customers, are subject to disruption for a variety of reasons, including work stoppages, acts of war, terrorism, health epidemics, fire, earthquake, volcanic eruptions, energy shortages, flooding or other natural disasters. Such disruption could cause delays in, among other things, shipments of products to our customers, our ability to perform services requested by our customers, or the installation and acceptance of our products at customer sites. We cannot ensure that alternate means of conducting our operations (whether through alternate production capacity or service providers or otherwise) would be available if a major disruption were to occur or that, if such alternate means were available, they could be obtained on favorable terms.

In addition, as part of our cost-cutting actions, we have consolidated several operating facilities. Our California operations are now primarily centralized in our Milpitas facility. The consolidation of our California operations into a single campus could further concentrate the risks related to any of the disruptive events described above, such as acts of war or terrorism, earthquakes, fires or other natural disasters, if any such event were to impact our Milpitas facility.

Table of Contents

We are predominantly uninsured for losses and interruptions caused by terrorist acts and acts of war. If international political instability continues or increases, our business and results of operations could be harmed.

The threat of terrorism targeted at, or acts of war in, the regions of the world in which we do business increases the uncertainty in our markets. Any act of terrorism or war that affects the economy or the semiconductor industry could adversely affect our business. Increased international political instability in various parts of the world, disruption in air transportation and further enhanced security measures as a result of terrorist attacks may hinder our ability to do business and may increase our costs of operations. We maintain significant manufacturing and research and development operations in Israel, an area that has historically experienced a high degree of political instability, and we are therefore exposed to risks associated with future instability in that region. Such instability could directly impact our ability to operate our business (or our customers’ ability to operate their businesses) in the affected region, cause us to incur increased costs in transportation, make such transportation unreliable, increase our insurance costs, and cause international currency markets to fluctuate. Such instability could also have the same effects on our suppliers and their ability to timely deliver their products. If international political instability continues or increases in any region in which we do business, our business and results of operations could be harmed. We are predominantly uninsured for losses and interruptions caused by terrorist acts and acts of war.

We self-insure certain risks including earthquake risk. If one or more of the uninsured events occurs, we could suffer major financial loss.

We purchase insurance to help mitigate the economic impact of certain insurable risks; however, certain risks are uninsurable, are insurable only at significant cost or cannot be mitigated with insurance. Accordingly, we may experience a loss that is not covered by insurance, either because we do not carry applicable insurance or because the loss exceeds the applicable policy amount or is less than the deductible amount of the applicable policy. For example, we do not currently hold earthquake insurance. An earthquake could significantly disrupt our manufacturing operations, a significant portion of which are conducted in California, an area highly susceptible to earthquakes. It could also significantly delay our research and engineering efforts on new products, much of which is also conducted in California. We take steps to minimize the damage that would be caused by an earthquake, but there is no certainty that our efforts will prove successful in the event of an earthquake. We self-insure earthquake risks because we believe this is a prudent financial decision based on our large cash reserves and the high cost and limited coverage available in the earthquake insurance market. Certain other risks are also self-insured either based on a similar cost-benefit analysis, or based on the unavailability of insurance. If one or more of the uninsured events occurs, we could suffer major financial loss.

We are exposed to foreign currency exchange rate fluctuations. Although we hedge certain currency risks, we may still be adversely affected by changes in foreign currency exchange rates or declining economic conditions in these countries.

We have some exposure to fluctuations in foreign currency exchange rates, primarily the euro and the Japanese Yen. We have international subsidiaries that operate and sell our products globally. In addition, an increasing proportion of our manufacturing activities are conducted outside of the United States, and many of the costs associated with such activities are denominated in foreign currencies. We routinely hedge our exposures to certain foreign currencies with certain financial institutions in an effort to minimize the impact of certain currency exchange rate fluctuations, but these hedges may be inadequate to protect us from currency exchange rate fluctuations. To the extent that these hedges are inadequate or if there are significant currency exchange rate fluctuations in currencies for which we do not have hedges in place, our reported financial results or the way we conduct our business could be adversely affected. Furthermore, if a financial counterparty to our hedges experiences financial difficulties or is otherwise unable to honor the terms of the foreign currency hedge, we may experience material financial losses.

We are exposed to fluctuations in interest rates and the market values of our portfolio investments; impairment of our investments could harm our earnings. In addition, we and our stockholders are exposed to risks related to the volatility of the market for our common stock.

Our investment portfolio primarily consists of both corporate and government debt securities that are susceptible to changes in market interest rates and bond yields. As market interest rates and bond yields increase, those securities with a lower yield-at-cost show a mark-to-market unrealized loss. We believe we have the ability to realize the full value of all these investments upon maturity. However, an impairment of the fair market value of our investments, even if unrealized, must be reflected in our financial statements for the applicable period and may therefore have a material adverse effect on our results of operations for that period.

Table of Contents

In addition, the market price for our common stock is volatile and has fluctuated significantly during recent years. The trading price of our common stock could continue to be highly volatile and fluctuate widely in response to various factors, including without limitation conditions in the semiconductor industry and other industries in which we operate, fluctuations in the global economy or capital markets, our operating results or other performance metrics, or adverse consequences experienced by us as a result of any of the risks described elsewhere in this Item 1A. Volatility in the market price of our common stock could cause an investor in our common stock to experience a loss on the value of their investment in us and could also adversely impact our ability to raise capital through the sale of our common stock or to use our common stock as consideration to acquire other companies.

We are exposed to risks in connection with tax and regulatory compliance audits in various jurisdictions.

We are subject to tax and regulatory compliance audits (such as related to customs or product safety requirements) in various jurisdictions, and such jurisdictions may assess additional income or other taxes, penalties, fines or other prohibitions against us. Although we believe our tax estimates are reasonable and that our products and practices comply with applicable regulations, the final determination of any such audit and any related litigation could be materially different from our historical income tax provisions and accruals related to income taxes and other contingencies. The results of an audit or litigation could have a material adverse effect on our operating results or cash flows in the period or periods for which that determination is made.

A change in our effective tax rate can have a significant adverse impact on our business.

We earn profits in, and are therefore potentially subject to taxes in, the U.S. and numerous foreign jurisdictions, including Singapore, Israel and the Cayman Islands, the countries in which we earn the majority of our non-U.S. profits. Due to economic, political or other conditions, tax rates in those jurisdictions may be subject to significant change. A number of factors may adversely impact our future effective tax rates, such as the jurisdictions in which our profits are determined to be earned and taxed; changes in the tax rates imposed by those jurisdictions; the resolution of issues arising from tax audits with various tax authorities; changes in the valuation of our deferred tax assets and liabilities; adjustments to estimated taxes upon finalization of various tax returns; increases in expenses not deductible for tax purposes, including write-offs of acquired in-process research and development and impairment of goodwill in connection with acquisitions; changes in available tax credits; changes in stock-based compensation expense; changes in tax laws or the interpretation of such tax laws (for example, proposals for fundamental United States international tax reform); changes in generally accepted accounting principles; and the repatriation of earnings from outside the United States for which we have not previously provided for United States taxes. A change in our effective tax rate can materially and adversely impact our results from operations.

Compliance with federal securities laws, rules and regulations, as well as NASDAQ requirements, is becoming increasingly complex, and the significant attention and expense we must devote to those areas may have an adverse impact on our business.

Federal securities laws, rules and regulations, as well as NASDAQ rules and regulations, require companies to maintain extensive corporate governance measures, impose comprehensive reporting and disclosure requirements, set strict independence and financial expertise standards for audit and other committee members and impose civil and criminal penalties for companies and their chief executive officers, chief financial officers and directors for securities law violations. These laws, rules and regulations have increased, and in the future are expected to continue to increase, the scope, complexity and cost of our corporate governance, reporting and disclosure practices, which could harm our results of operations and divert management’s attention from business operations.

A change in accounting standards or practices or a change in existing taxation rules or practices (or changes in interpretations of such standards, practices or rules) can have a significant effect on our reported results and may even affect reporting of transactions completed before the change is effective.

New accounting pronouncements and taxation rules and varying interpretations of accounting pronouncements and taxation rules have occurred and will continue to occur in the future. Changes to (or revised interpretations or applications of) existing tax or accounting rules or the questioning of current or past practices may adversely affect our reported financial results or the way we conduct our business.


ITEM 1B.	UNRESOLVED STAFF COMMENTS

None.

Table of Contents


ITEM 2.	PROPERTIES

Information regarding our principal properties as of June 30, 2015 is set forth below:



Location	Type	Principal Use	Square Footage	Ownership
Milpitas, CA	Office, plant and warehouse	Principal Executive Offices, Research, Engineering, Marketing, Manufacturing, Service and Sales Administration	727,302	Owned

Westwood, MA⁽¹⁾	Office and plant	Engineering, Marketing, Manufacturing and Service	116,908	Leased

Leuven, Belgium⁽¹⁾	Office, plant and warehouse	Engineering, Marketing and Service and Sales Administration	99,315	Owned

Shenzhen, China	Office and plant	Sales, Service and Manufacturing	47,213	Leased

Shanghai, China	Office	Research, Service and Sales Administration	41,184	Leased

Weilburg, Germany	Office and plant	Engineering, Marketing, Manufacturing, Service and Sales Administration	138,119	Leased

Chennai, India	Office	Engineering	33,366	Owned

Migdal Ha’Emek, Israel	Office and plant	Research, Engineering, Marketing, Manufacturing, Service and Sales Administration	191,982	Owned

Yokohama, Japan	Office and warehouse	Sales and Service	37,418	Leased

Serangoon, Singapore⁽²⁾	Office and plant	Sales, Service and Manufacturing	248,155	Owned

Hsinchu, Taiwan	Office	Sales and Service	73,676	Leased

__________________


(1)	Portions of this property are sublet, are vacant and marketed to sublease, or are leased to third parties.


(2)	We own the building at our location in Serangoon, Singapore, but the land on which this building resides is leased.

As of June 30, 2015, we owned or leased a total of approximately 2.1 million square feet of space worldwide, including the locations listed above and office space for smaller sales and service offices in several locations throughout the world. Our operating leases expire at various times through December 31, 2021, subject to renewal, with some of the leases containing renewal option clauses at the fair market value, for additional periods up to five years. Additional information regarding these leases is incorporated herein by reference to Note 13, “Commitments and Contingencies” to the Consolidated Financial Statements. We believe our properties are adequately maintained and suitable for their intended use and that our production facilities have capacity adequate for our current needs.


ITEM 3.	LEGAL PROCEEDINGS

The information set forth below under Note 14, “Litigation and Other Legal Matters” to the Consolidated Financial Statements is incorporated herein by reference.


ITEM 4.	MINE SAFETY DISCLOSURES

Not applicable.

Table of Contents

PART II


ITEM 5.	MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Our common stock is listed and traded on the NASDAQ Global Select Market under the symbol “KLAC.”

The prices per share reflected in the following table represent the high and low closing prices for our common stock on the NASDAQ Global Select Market for the periods indicated:



	Year ended June 30, 2015							Year ended June 30, 2014
	High		Low		Cash Dividends Declared per share			High		Low		Cash Dividends Declared per share
First Fiscal Quarter	$	80.86	$	71.40	$	0.50		$	62.01	$	54.67	$	0.45
Second Fiscal Quarter	$	84.18	$	65.61	$	17.00	*	$	66.19	$	59.46	$	0.45
Third Fiscal Quarter	$	70.95	$	58.29	$	0.50		$	70.02	$	59.73	$	0.45
Fourth Fiscal Quarter	$	60.30	$	55.65	$	0.50		$	72.64	$	62.30	$	0.45

__________________

* Includes a special cash dividend of $16.50 per share that was declared by our Board of Directors on November 19, 2014 and was paid on December 9, 2014 to the stockholders of record as of the close of business on December 1, 2014 during the second quarter of the fiscal year ended June 30, 2015. Additional information regarding cash dividends can be found in Note 8, “Equity and Long-term Incentive Compensation Plans.”

On July 14, 2015, we announced that our Board of Directors had authorized a further increase in the level of the Company’s quarterly dividend from $0.50 to $0.52 per share. Additional information regarding the increase in cash dividends after fiscal year-end can be found in Note 19, “Subsequent Events.”

As of July 17, 2015, there were 451 holders of record of our common stock.

Equity Repurchase Plans

The following is a summary of stock repurchases for each month during the fourth quarter of the fiscal year ended June 30, 2015⁽¹⁾:



Period	Total Number of Shares Purchased ⁽²⁾	Average Price Paid per Share		Maximum Number of Shares that May Yet Be Purchased Under the Plans or Programs ⁽³⁾
April 1, 2015 to April 30, 2015	1,350,089	$	58.93	10,760,336
May 1, 2015 to May 31, 2015	634,622	$	59.31	10,125,714
June 1, 2015 to June 30, 2015	764,301	$	57.26	9,361,413
Total	2,749,012	$	58.55

__________________

(1)

Our Board of Directors has authorized a program for us to repurchase shares of our common stock. The total number and dollar amount of shares repurchased for the fiscal years ended June 30, 2015, 2014 and 2013 were 9.3 million shares ($608.9 million), 3.8 million shares ($240.8 million) and 5.4 million shares ($273.3 million), respectively. On July 7, 2014, our Board of Directors authorized KLA-Tencor to repurchase up to 13 million additional shares of our common stock. On October 23, 2014, as part of the leveraged recapitalization transaction, our Board of Directors authorized an increase to the existing stock repurchase program of 3.6 million additional shares of our common stock.


(2)	All shares were purchased pursuant to the publicly announced repurchase program described in footnote 1 above. Shares are reported based on the trade date of the applicable repurchase.


(3)	The stock repurchase program has no expiration date. Future repurchases of our common stock under our repurchase program may be effected through various different repurchase transaction structures, including isolated open market transactions or systematic repurchase plans.

Table of Contents

Stock Performance Graph and Cumulative Total Return

The following graph compares the cumulative 5-year total return attained by stockholders on our common stock relative to the cumulative total returns of the S&P 500 Index (as required by SEC regulations) and the Philadelphia Semiconductor Index (PHLX). The graph tracks the performance of a $100 investment in our common stock and in each of the indices (with the reinvestment of all dividends) from June 30, 2010 to June 30, 2015.



	6/10	6/11	6/12	6/13	6/14	6/15
KLA-Tencor Corporation	$100.00	$148.99	$187.01	$218.28	$292.87	$290.54
S&P 500	$100.00	$130.69	$137.81	$166.20	$207.10	$222.47
PHLX Semiconductor	$100.00	$135.83	$139.10	$165.22	$223.35	$233.52

__________________

* Assumes $100 invested on June 30, 2010 in stock or index, including reinvestment of dividends.

Our fiscal year ends June 30. The comparisons in the graph above are based upon historical data and are not necessarily indicative of, nor intended to forecast, future stock price performance.

Table of Contents


ITEM 6.	SELECTED FINANCIAL DATA

The following tables include selected consolidated summary financial data for each of our last five fiscal years. This data should be read in conjunction with Item 8, “Financial Statements and Supplementary Data,” and Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in this Annual Report on Form 10-K.



	Year ended June 30,
(In thousands, except per share amounts)	2015		2014		2013		2012		2011
Consolidated Statements of Operations:
Total revenues	$	2,814,049	$	2,929,408	$	2,842,781	$	3,171,944	$	3,175,167
Net income⁽¹⁾	$	366,158	$	582,755	$	543,149	$	756,015	$	794,488
Cash dividends declared per share (including a special cash dividend of $16.50 per share declared during the three months ended December 31, 2014)	$	18.50	$	1.80	$	1.60	$	1.40	$	1.00
Net income per share:
Basic	$	2.26	$	3.51	$	3.27	$	4.53	$	4.75
Diluted	$	2.24	$	3.47	$	3.21	$	4.44	$	4.66

	As of June 30,
	2015		2014		2013		2012		2011
Consolidated Balance Sheets:
Cash, cash equivalents and marketable securities	$	2,387,111	$	3,152,637	$	2,918,881	$	2,534,444	$	2,038,535
Working capital	$	2,902,813	$	3,690,484	$	3,489,236	$	3,300,401	$	2,796,414
Total assets⁽³⁾	$	4,826,012	$	5,535,846	$	5,283,804	$	5,096,020	$	4,670,498
Long-term debt^{(2) (3)}	$	3,173,435	$	745,101	$	743,823	$	742,545	$	741,267
Total stockholders’ equity⁽²⁾	$	421,439	$	3,669,346	$	3,482,152	$	3,315,595	$	2,860,893

____________


(1)	Our net income decreased to $366.2 million in the fiscal year ended June 30, 2015, primarily as a result of the impact of the pre-tax net loss of $131.7 million for the loss on extinguishment of debt and certain one-time expenses of $2.5 million associated with the leveraged recapitalization that was completed during the three months ended December 31, 2014.

(2)

Our long-term debt increased to $3.17 billion at the end of fiscal year ended June 30, 2015, because, as part of the leveraged recapitalization plan, we issued $2.50 billion aggregate principal amount of senior, unsecured long-term notes (collectively referred to as “Senior Notes”), entered into $750 million of five-year senior unsecured prepayable term loans and a $500 million unfunded revolving credit facility and redeemed our $750 million aggregate principal amount of 6.900% Senior Notes due in 2018 (the “2018 Notes”). Refer to Note 7, “Debt” for additional details. Our total stockholders’ equity decreased to $421.4 million at the end of fiscal year ended June 30, 2015, because, as part of our leveraged recapitalization plan, we declared a special cash dividend of approximately $2.76 billion. Refer to Note 8, “Equity and Long-term Incentive Compensation Plans” for additional details.

(3)

We early adopted the accounting standard update regarding simplification of the presentation of debt issuance costs, which requires that debt issuance costs related to a recognized debt liability be presented on the balance sheet as a direct deduction from the carrying amount of that debt liability, consistent with debt discounts. Accordingly, we applied the accounting standard update on a retrospective basis by reclassifying the presentation of the debt issuance costs which was originally included in other current and other non-current assets against the long-term debt on the Consolidated Balance Sheets as of June 30, 2014, 2013, 2012 and 2011. The change in the classification of the debt issuance costs reduced total assets and total liabilities by $2.8 million, $3.6 million, $4.3 million and $5.0 million as of June 30, 2014, 2013, 2012 and 2011, respectively. There is no impact to our Consolidated Statements of Operations, Comprehensive Income, Stockholder’s Equity and Cash Flows for the fiscal years ended June 30, 2014, 2013, 2012 and 2011.

Table of Contents


ITEM 7.	MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

The following discussion of our financial condition and results of operations should be read in conjunction with our Consolidated Financial Statements and the related notes included in Item 8, “Financial Statements and Supplementary Data,” in this Annual Report on Form 10-K. This discussion contains forward-looking statements, which involve risks and uncertainties. Our actual results could differ materially from those anticipated in the forward-looking statements as a result of certain factors, including but not limited to those discussed in Item 1A, “Risk Factors” and elsewhere in this Annual Report on Form 10-K. (See “Special Note Regarding Forward-Looking Statements.”)

CRITICAL ACCOUNTING ESTIMATES AND POLICIES

The preparation of our consolidated financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions in applying our accounting policies that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosure of contingent assets and liabilities. We base these estimates and assumptions on historical experience, and evaluate them on an on-going basis to ensure that they remain reasonable under current conditions. Actual results could differ from those estimates. We discuss the development and selection of the critical accounting estimates with the Audit Committee of our Board of Directors on a quarterly basis, and the Audit Committee has reviewed our related disclosure in this Annual Report on Form 10-K. The accounting policies that reflect our more significant estimates, judgments and assumptions and which we believe are the most critical to aid in fully understanding and evaluating our reported financial results include the following:

Revenue Recognition. We recognize revenue when persuasive evidence of an arrangement exists, delivery has occurred or services have been rendered, the selling price is fixed or determinable, and collectibility is reasonably assured. We derive revenue from three sources—sales of systems, spare parts and services. In general, we recognize revenue for systems when the system has been installed, is operating according to predetermined specifications and is accepted by the customer. When we have demonstrated a history of successful installation and acceptance, we recognize revenue upon delivery and customer acceptance. Under certain circumstances, however, we recognize revenue prior to acceptance from the customer, as follows:


•	When the customer fab has previously accepted the same tool, with the same specifications, and when we can objectively demonstrate that the tool meets all of the required acceptance criteria.


•	When system sales to independent distributors have no installation requirement, contain no acceptance agreement, and 100% payment is due based upon shipment.


•	When the installation of the system is deemed perfunctory.


•	When the customer withholds acceptance due to issues unrelated to product performance, in which case revenue is recognized when the system is performing as intended and meets predetermined specifications.

In circumstances in which we recognize revenue prior to installation, the portion of revenue associated with installation is deferred based on estimated fair value, and that revenue is recognized upon completion of the installation.

In many instances, products are sold in stand-alone arrangements. Services are sold separately through renewals of annual maintenance contracts. We have multiple element revenue arrangements in cases where certain elements of a sales arrangement are not delivered and accepted in one reporting period. To determine the relative fair value of each element in a revenue arrangement, we allocate arrangement consideration based on the selling price hierarchy. For substantially all of the arrangements with multiple deliverables pertaining to products and services, we use vendor-specific objective evidence (“VSOE”) or third-party evidence (“TPE”) to allocate the selling price to each deliverable. We determine TPE based on historical prices charged for products and services when sold on a stand-alone basis. When we are unable to establish relative selling price using VSOE or TPE, we use estimated selling price (“ESP”) in our allocation of arrangement consideration. The objective of ESP is to determine the price at which we would transact a sale if the product or service were sold on a stand-alone basis. ESP could potentially be used for new or customized products. We regularly review relative selling prices and maintain internal controls over the establishment and updates of these estimates. In a multiple element revenue arrangement, we defer revenue recognition associated with the relative fair value of each undelivered element until that element is delivered to the customer. To be considered a separate element, the product or service in question must represent a separate unit of accounting, which means that such product or service must fulfill the following criteria: (a) the delivered item(s) has value to the customer on a stand-alone basis; and (b) if the arrangement includes a general right of return relative to the delivered item(s), delivery or performance of the undelivered item(s) is considered probable and substantially in our control. If the arrangement does not meet all the above criteria, the entire amount of the sales contract is deferred until all elements are accepted by the customer.

Trade-in rights are occasionally granted to customers to trade in tools in connection with subsequent purchases. We estimate the value of the trade-in right and reduce the revenue recognized on the initial sale. This amount is recognized at the earlier of the exercise of the trade-in right or the expiration of the trade-in right.

Table of Contents

Spare parts revenue is recognized when the product has been shipped, risk of loss has passed to the customer and collection of the resulting receivable is probable.

Service and maintenance contract revenue is recognized ratably over the term of the maintenance contract. Revenue from services performed in the absence of a maintenance contract, including consulting and training revenue, is recognized when the related services are performed and collectibility is reasonably assured.

We sell stand-alone software that is subject to the software revenue recognition guidance. We periodically review selling prices to determine whether VSOE exists, and in situations where we are unable to establish VSOE for undelivered elements, such as post-contract service, revenue is recognized ratably over the term of the service contract.

We also defer the fair value of non-standard warranty bundled with equipment sales as unearned revenue. Non-standard warranty includes services incremental to the standard 40-hour per week coverage for 12 months. Non-standard warranty is recognized ratably as revenue when the applicable warranty term period commences.

The deferred system profit balance equals the amount of deferred system revenue that was invoiced and due on shipment, less applicable product and warranty costs. Deferred system revenue represents the value of products that have been shipped and billed to customers which have not met our revenue recognition criteria. Deferred system profit does not include the profit associated with product shipments to certain customers in Japan, to whom title does not transfer until customer acceptance. Shipments to such customers in Japan are classified as inventory at cost until the time of acceptance.

We enter into sales arrangements that may consist of multiple deliverables of our products and services where certain elements of the sales arrangement are not delivered and accepted in one reporting period. Judgment is required to properly identify the accounting units of the multiple deliverable transactions and to determine the manner in which revenue should be allocated among the accounting units. Additionally, judgment is required to interpret various commercial terms and determine when all criteria of revenue recognition have been met in order for revenue recognition to occur in the appropriate accounting period. While changes in the allocation of the estimated selling price between the accounting units will not affect the amount of total revenue recognized for a particular arrangement, any material changes in these allocations could impact the timing of revenue recognition, which could have a material effect on our financial position and results of operations.

Inventories. Inventories are stated at the lower of cost (on a first-in, first-out basis) or market. Demonstration units are stated at their manufacturing cost and written down to their net realizable value. Our manufacturing overhead standards for product costs are calculated assuming full absorption of forecasted spending over projected volumes, adjusted for excess capacity. Abnormal inventory costs such as costs of idle facilities, excess freight and handling costs, and spoilage are recognized as current period charges. We write down product inventory based on forecasted demand and technological obsolescence and service spare parts inventory based on forecasted usage. These factors are impacted by market and economic conditions, technology changes, new product introductions and changes in strategic direction and require estimates that may include uncertain elements. Actual demand may differ from forecasted demand, and such differences may have a material effect on recorded inventory values.

Warranty. We provide standard warranty coverage on our systems for 40 hours per week for 12 months, providing labor and parts necessary to repair the systems during the warranty period. We account for the estimated warranty cost as a charge to costs of revenues when revenue is recognized. The estimated warranty cost is based on historical product performance and field expenses. Utilizing actual service records, we calculate the average service hours and parts expense per system and apply the actual labor and overhead rates to determine the estimated warranty charge. We update these estimated charges on a regular basis. The actual product performance and/or field expense profiles may differ, and in those cases we adjust our warranty accruals accordingly. See Note 13, “Commitments and Contingencies” to the Consolidated Financial Statements for a detailed description.

Allowance for Doubtful Accounts. A majority of our trade receivables are derived from sales to large multinational semiconductor manufacturers throughout the world. In order to monitor potential credit losses, we perform ongoing credit evaluations of our customers’ financial condition. An allowance for doubtful accounts is maintained for probable credit losses based upon our assessment of the expected collectibility of the accounts receivable. The allowance for doubtful accounts is reviewed on a quarterly basis to assess the adequacy of the allowance. We take into consideration (1) any circumstances of which we are aware of a customer’s inability to meet its financial obligations; and (2) our judgments as to prevailing economic conditions in the industry and their impact on our customers. If circumstances change, such that the financial conditions of our customers are adversely affected and they are unable to meet their financial obligations to us, we may need to record additional allowances, which would result in a reduction of our net income.

Table of Contents

Stock-Based Compensation. We account for stock-based awards granted to employees for services based on the fair value of those awards. The fair value of stock-based awards is measured at the grant date and is recognized as expense over the employee’s requisite service period. The fair value for restricted stock units granted without “dividend equivalent” rights is determined using the closing price of our common stock on the grant date for restricted stock units, adjusted to exclude the present value of dividends which are not accrued on the restricted stock units. The fair value for restricted stock units granted with “dividend equivalent” rights is determined using the closing price of our common stock on the grant date. The award holder is not entitled to receive payments under dividend equivalent rights unless the associated restricted stock unit award vests (i.e., the award holder is entitled to receive credits, payable in cash or shares of our common stock, equal to the cash dividends that would have been received on the shares of our common stock underlying the restricted stock units had the shares been issued and outstanding on the dividend record date, but such dividend equivalents are only paid subject to the recipient satisfying the vesting requirements of the underlying award). The fair value is determined using a Black-Scholes valuation model for purchase rights under our Employee Stock Purchase Plan. The Black-Scholes option-pricing model requires the input of assumptions, including the option’s expected term and the expected price volatility of the underlying stock. The expected stock price volatility assumption is based on the market-based historical implied volatility from traded options of our common stock. We have elected not to include the indirect tax effects of stock-based compensation deductions when calculating the windfall benefits and therefore recognize the full effect of these deductions in the income statement in the period in which the taxable event occurs.

Accounting for Cash-Based Long-Term Incentive Compensation. Cash-based long-term incentive (“Cash LTI”) awards issued to employees under our Cash LTI program vest in four equal installments, with 25% of the aggregate amount of the Cash LTI award vesting on each yearly anniversary of the grant date over a four-year period. In order to receive payments under a Cash LTI award, participants must remain employed by us as of the applicable award vesting date. Compensation expense related to the Cash LTI awards is recognized over the vesting term, which is adjusted for the impact of estimated forfeitures.

Contingencies and Litigation. We are subject to the possibility of losses from various contingencies. Considerable judgment is necessary to estimate the probability and amount of any loss from such contingencies. An accrual is made when it is probable that a liability has been incurred or an asset has been impaired and the amount of loss can be reasonably estimated. We accrue a liability and recognize as expense the estimated costs expected to be incurred over the next twelve months to defend or settle asserted and unasserted claims existing as of the balance sheet date. See Note 13, “Commitments and Contingencies” and Note 14, “Litigation and Other Legal Matters” to the Consolidated Financial Statements for a detailed description.

Goodwill and Intangible Assets. We assess goodwill for impairment annually as well as whenever events or changes in circumstances indicate that the carrying value may not be recoverable. Long-lived intangible assets are tested for recoverability whenever events or changes in circumstances indicate that their carrying amounts may not be recoverable. See Note 6, “Goodwill and Purchased Intangible Assets” to the Consolidated Financial Statements for a detailed description. Goodwill represents the excess of the purchase price over the fair value of the net tangible and identifiable intangible assets acquired in each business combination. We performed our annual qualitative assessment of the goodwill by reporting unit in our second quarter of fiscal year ended June 30, 2015 and concluded that there was no impairment. There have been no significant events or circumstances affecting the valuation of goodwill subsequent to our annual impairment test. The next annual evaluation of the goodwill by reporting unit will be performed in the second quarter of the fiscal year ending June 30, 2016.

If we were to encounter challenging economic conditions, such as a decline in our operating results, an unfavorable industry or macroeconomic environment, a substantial decline in our stock price, or any other adverse change in market conditions, we may be required to perform the two-step quantitative goodwill impairment analysis. In addition, if such conditions have the effect of changing one of the critical assumptions or estimates we use to calculate the value of our goodwill or intangible assets, we may be required to record goodwill and/or intangible asset impairment charges in future periods. It is not possible at this time to determine if any such future impairment charge would occur or, if it does, whether such charge would be material to our results of operations.

Income Taxes. We account for income taxes in accordance with the authoritative guidance, which requires that deferred tax assets and liabilities be recognized using enacted tax rates for the effect of temporary differences between the book and tax bases of recorded assets and liabilities. The guidance also requires that deferred tax assets be reduced by a valuation allowance if it is more likely than not that a portion of the deferred tax asset will not be realized. We have determined that a valuation allowance is necessary against a portion of the deferred tax assets, but we anticipate that our future taxable income will be sufficient to recover the remainder of our deferred tax assets. However, should there be a change in our ability to recover our deferred tax assets that are not subject to a valuation allowance, we could be required to record an additional valuation allowance against such deferred tax assets. This would result in an increase to our tax provision in the period in which we determine that the recovery is not probable.

Table of Contents

On a quarterly basis, we provide for income taxes based upon an estimated annual effective income tax rate. The effective tax rate is highly dependent upon the geographic composition of worldwide earnings, tax regulations governing each region, availability of tax credits and the effectiveness of our tax planning strategies. We carefully monitor the changes in many factors and adjust our effective income tax rate on a timely basis. If actual results differ from these estimates, this could have a material effect on our financial condition and results of operations.

In addition, the calculation of our tax liabilities involves dealing with uncertainties in the application of complex tax regulations. In accordance with the authoritative guidance on accounting for uncertainty in income taxes, we recognize liabilities for uncertain tax positions based on the two-step process prescribed within the interpretation. The first step is to evaluate the tax position for recognition by determining if the weight of available evidence indicates that it is more likely than not that the position will be sustained in audit, including resolution of related appeals or litigation processes, if any. The second step is to measure the tax benefit as the largest amount that is more than 50% likely of being realized upon ultimate settlement. We reevaluate these uncertain tax positions on a quarterly basis. This evaluation is based on factors including, but not limited to, changes in facts or circumstances, changes in tax law, effectively settled issues under audit and new audit activity. Any change in these factors could result in the recognition of a tax benefit or an additional charge to the tax provision.

Valuation of Marketable Securities. Our investments in available-for-sale securities are reported at fair value. Unrealized gains related to increases in the fair value of investments and unrealized losses related to decreases in the fair value are included in accumulated other comprehensive income (loss), net of tax, as reported on our Consolidated Statements of Stockholders’ Equity. However, changes in the fair value of investments impact our net income only when such investments are sold or an impairment charge is recognized. Realized gains and losses on the sale of securities are determined by specific identification of the security’s cost basis. We periodically review our investment portfolio to determine if any investment is other-than-temporarily impaired due to changes in credit risk or other potential valuation concerns, which would require us to record an impairment charge in the period during which any such determination is made. In making this judgment, we evaluate, among other things, the duration of the investment, the extent to which the fair value of an investment is less than its cost, the credit rating and any changes in credit rating for the investment, default and loss rates of the underlying collateral, structure and credit enhancements to determine if a credit loss may exist. Our assessment that an investment is not other-than-temporarily impaired could change in the future due to new developments or changes in our strategies or assumptions related to any particular investment.

Effects of Recent Accounting Pronouncements

Recently Adopted

In July 2013, the Financial Accounting Standards Board (“FASB”) issued an accounting standard update that provides guidance on the financial statement presentation of an unrecognized tax benefit when a net operating loss carryforward, a similar tax loss or a tax credit carryforward exists. Under this accounting standard update, in most circumstances, an unrecognized tax benefit, or a portion of an unrecognized tax benefit, should be presented in our financial statements as a reduction to a deferred tax asset for a net operating loss carryforward, a similar tax loss or a tax credit carryforward. This accounting standard update became effective for our interim period ended September 30, 2014, and its adoption did not have a material impact on our consolidated financial statements.

In June 2014, the FASB issued an accounting standard update regarding stock-based compensation that clarifies the accounting treatment when terms of an award provide that a performance target could be achieved after the requisite service period ends. The update requires that a performance target that affects vesting that could be achieved after the requisite service period ends be treated as a performance condition. The update is effective beginning in the first quarter of our fiscal year ending June 30, 2017, with early adoption permitted. We early adopted this accounting standard update in the third quarter of our fiscal year ended June 30, 2015 and the adoption did not have a material impact on our consolidated financial statements.

In April 2015, the FASB issued accounting standards update regarding simplification of the presentation of debt issuance costs, which requires that debt issuance costs related to a recognized debt liability be presented in the balance sheet as a direct deduction from the carrying amount of that debt liability, consistent with debt discounts. The update is effective for us beginning in the first quarter of the fiscal year ending June 30, 2017. Earlier adoption is permitted for financial statements that have not been previously issued and we are required to apply the guidance on a retrospective basis with additional disclosure requirements upon transition. We early adopted this accounting standard update in the fourth quarter of our fiscal year ended June 30, 2015 and the adoption did not have a material impact on our consolidated financial statements.

Table of Contents

Updates Not Yet Effective

In May 2014, the FASB issued an accounting standard update regarding revenue from customer contracts to transfer goods and services or non-financial assets, unless the contracts are covered by other standards (for example, insurance or lease contracts). Under the new guidance, an entity should recognize revenue in connection with the transfer of promised goods or services to customers in an amount that reflects the consideration that the entity expects to be entitled to receive in exchange for those goods or services. In addition, the new standard requires that reporting companies disclose the nature, amount, timing, and uncertainty of revenue and cash flows arising from contracts with customers. The updates are effective for us beginning in the first quarter of our fiscal year ending June 30, 2018. In July 2015, the FASB announced a deferral of the effective date by one year, with early adoption on the original effective date permitted. The new revenue standard may be applied retrospectively to each prior period presented or retrospectively with the cumulative effect recognized as of the date of adoption. We are currently evaluating the impact of this accounting standard update on our consolidated financial statements.

In April 2015, the FASB issued an accounting standard update for customer’s cloud based fees. The guidance changes what a customer must consider in determining whether a cloud computing arrangement contains a software license. If the arrangement contains a software license, the customer would account for the fees related to the software license element in accordance with guidance related to internal use software; if the arrangement does not contain a software license, the customer would account for the arrangement as a service contract. The update is effective for us beginning in the first quarter of our fiscal year ending June 30, 2017, with early adoption permitted. We are currently evaluating the impact of this accounting standard update on our consolidated financial statements.

In July 2015, the FASB issued an accounting standard update for the subsequent measurement of inventory. The amended guidance requires entities to measure inventory at the lower of cost or net realizable value. Net realizable value is the estimated selling prices in the ordinary course of business, less reasonably predictable costs of completion, disposal and transportation. The requirement would replace the current lower of cost or market evaluation and the accounting guidance is unchanged for inventory measured using last-in, first-out (“LIFO”) or the retail inventory method. The update is effective for us beginning in the first quarter of our fiscal year ending June 30, 2018, with early adoption permitted to be applied prospectively. We are currently evaluating the impact of this accounting standard update on our consolidated financial statements.

EXECUTIVE SUMMARY

KLA-Tencor Corporation is a leading supplier of process control and yield management solutions for the semiconductor and related nanoelectronics industries. Our broad portfolio of defect inspection and metrology products, and related service, software and other offerings primarily supports integrated circuit (“IC” or “chip”) manufacturers throughout the entire semiconductor fabrication process, from research and development to final volume production. We provide leading-edge equipment, software and support that enable IC manufacturers to identify, resolve and manage significant advanced technology manufacturing process challenges and obtain higher finished product yields at lower overall cost. In addition to serving the semiconductor industry, we also provide a range of technology solutions to a number of other high technology industries, including the LED and data storage industries, as well as general materials research.

Our products and services are used by the vast majority of bare wafer, IC, lithography reticle (“reticle” or “mask”) and disk manufacturers around the world. Our products, services and expertise are used by our customers to measure, detect, analyze and resolve critical product defects that arise in that environment in order to control nanometric level manufacturing processes. Our revenues are driven largely by our customers’ spending on capital equipment and related maintenance services necessary to support key transitions in their underlying product technologies, or to increase their production volumes in response to market demand. Our semiconductor customers generally operate in one or more of the three major semiconductor markets - memory, foundry and logic. All three of these markets are characterized by rapid technological changes and sudden shifts in end-user demand, which influence the level and pattern of our customers’ spending on our products and services. Although capital spending in all three semiconductor markets has historically been very cyclical, the demand for more advanced and lower cost chips used in a growing number of consumer electronics, communications, data processing, and industrial and automotive products has resulted over the long term in a favorable demand environment for our process control and yield management solutions, particularly in the foundry and logic markets, which have higher levels of process control adoption than the memory market.

Table of Contents

As we are a supplier to the global semiconductor and semiconductor-related industries, our customer base continues to become more highly concentrated over time, thereby increasing the potential impact of a sudden change in capital spending by a major customer on our revenues and profitability. As our customer base becomes increasingly more concentrated, large orders from a relatively limited number of customers account for a substantial portion of our sales, which potentially exposes us to more volatility for revenues and earnings. We are also subject to the cyclical capital spending that has historically characterized the semiconductor and semiconductor-related industries. The timing, length, intensity and volatility of the capacity-oriented capital spending cycles of our customers are unpredictable.

The semiconductor industry has also been characterized by constant technological innovation. The growing use of increasingly sophisticated semiconductor devices in mobile consumer products has caused many of our customers to invest in additional semiconductor manufacturing capabilities and capacity. On the other hand, higher design costs for the most advanced ICs could economically constrain leading-edge manufacturing technology customers to focus their resources on only the large technologically advanced products and applications. We believe that, over the long term, our customers will continue to invest in advanced technologies and new materials to enable smaller design rules and higher density applications that fuel demand for process control equipment, although the growth for such equipment may be adversely impacted by higher design costs for advanced ICs, reuse of installed products, and delays in production ramps by our customers in response to higher costs and technical challenges at more advanced technology nodes.

The demand for our products and our revenue levels are driven by our customers’ needs to solve the process challenges that they face as they adopt new technologies required to fabricate advanced ICs that are incorporated into sophisticated mobile devices. The timing for our customers in ordering and taking delivery of process control and yield management equipment is also determined by our customers’ requirements to meet the next generation production ramp schedules, and the timing for capacity expansion to meet end customer demand. Our earnings will depend not only on our revenue levels, but also on the amount of research and development spending required to meet our customers’ technology roadmaps. We have maintained production volumes and capacity to meet anticipated customer requirements and remain at risk of incurring significant inventory-related and other restructuring charges if business conditions deteriorate. Over the past year, our customers have taken delivery of lower volumes of process control equipment that we had expected. Any delay or push out by our customers in taking delivery of process control and yield management equipment may cause earnings volatility, due to increases in the risk of inventory related charges as well as timing of revenue recognition due to expiration of credits or volume discounts, which, if not used by a stipulated time frame, will expire.

During the most recent quarter, we implemented a plan to reduce our global employee workforce aimed at streamlining our organization and business processes in response to the changing customer requirements in our industry. The goals of this reduction are to enable continued innovation, direct our resources toward our best opportunities and lower our ongoing expense run rate. We expect to substantially complete the global employee workforce reduction by the end of the first quarter of fiscal year 2016, but certain reductions will occur in the second quarter of fiscal year 2016.

The following table sets forth some of our key consolidated financial information for each of our last three fiscal years:



	Year ended June 30,
(Dollar amounts in thousands)	2015			2014			2013
Total revenues	$	2,814,049		$	2,929,408		$	2,842,781
Costs of revenues	$	1,215,229		$	1,232,962		$	1,237,452
Gross margin percentage	57		%	58		%	56		%
Net income	$	366,158		$	582,755		$	543,149
Diluted income per share	$	2.24		$	3.47		$	3.21

Total revenues during the fiscal year ended June 30, 2015 decreased by 4% compared to the fiscal year ended June 30, 2014. Revenue decreases from sales of both our defect inspection and metrology products for the fiscal year ended June 30, 2015 reflected our customers’ decline in capital spending for process control equipment, due to shifts in the timing of the new technology ramps and capacity-related expansion plans.

Total revenues during the fiscal year ended June 30, 2014 increased by 3% compared to the fiscal year ended June 30, 2013, as our customers continued to invest in process control and services to improve manufacturing yields as they adopt advanced technologies and new materials to enable smaller design rules required to fabricate advanced ICs.

Table of Contents

Revenues and Gross Margin



	Year ended June 30,
(Dollar amounts in thousands)	2015			2014			2013			FY15 vs. FY14					FY14 vs. FY13
Revenues:
Product	$	2,125,396		$	2,286,437		$	2,247,147		$	(161,041	)	(7	)%	$	39,290		2	%
Service	688,653			642,971			595,634			45,682			7	%	47,337			8	%
Total revenues	$	2,814,049		$	2,929,408		$	2,842,781		$	(115,359	)	(4	)%	$	86,627		3	%
Costs of revenues	$	1,215,229		$	1,232,962		$	1,237,452		$	(17,733	)	(1	)%	$	(4,490	)	—	%
Gross margin percentage	57		%	58		%	56		%	(1		)%			2		%

Product revenues

Our business is affected by the concentration of our customer base and our customers’ capital equipment procurement schedules as a result of their investment plans. Our product revenues in any particular period are significantly impacted by the amount of new orders that we receive during that period and, depending upon the duration of manufacturing and installation cycles, in the preceding period.

Product revenues decreased by 7% in the fiscal year ended June 30, 2015 compared to the fiscal year ended June 30, 2014, primarily as a result of lower revenues from our customers in Taiwan, certain countries in Asia and Europe and Israel, partially offset by higher revenues from our customers in North America, Korea and Japan. The decline in revenues was impacted by the timing of development and new technology ramps of our customers as well as the lower shipments of our products, particularly to our foundry customers in Taiwan, due to timing of capacity-related expansion plans.

Product revenues increased by 2% in the fiscal year ended June 30, 2014 compared to the fiscal year ended June 30, 2013, as our customers increased their investments in defect inspection capabilities to address the yield challenges caused by the introduction of new technologies and architectures, and added production capacity to meet the growing needs for advanced ICs demanded in an environment of rising global demand for mobile devices.

Service revenues

Service revenues are generated from maintenance contracts, as well as billable time and material service calls made to our customers after the expiration of the warranty period. The amount of our service revenues is typically a function of the number of post-warranty systems installed at our customers’ sites and the utilization of those systems, but it is also impacted by other factors, such as our rate of service contract renewals, the types of systems being serviced and fluctuations in foreign exchange rates. Service revenues increased sequentially over the fiscal years ended June 30, 2013, 2014 and 2015, primarily as a result of an increase over time in the number of post-warranty systems installed at our customers’ sites over that time period.

Revenues - Top Customers

The following customers each accounted for more than 10% of our total revenues for the indicated periods:



Year ended June 30,
2015	2014	2013
Intel Corporation	Intel Corporation	Intel Corporation
Samsung Electronics Co., Ltd.	Samsung Electronics Co., Ltd.	Taiwan Semiconductor Manufacturing Company Limited
Taiwan Semiconductor Manufacturing Company Limited	Taiwan Semiconductor Manufacturing Company Limited

Table of Contents

Revenues by region

Revenues by region for the periods indicated were as follows:



	Year ended June 30,
(Dollar amounts in thousands)	2015				2014				2013
North America	$	815,914	29	%	$	705,159	24	%	$	846,125	30	%
Taiwan	691,482		25	%	741,470		25	%	936,445		33	%
Japan	426,963		15	%	334,653		11	%	310,204		11	%
Europe & Israel	194,670		7	%	306,779		11	%	211,121		7	%
Korea	405,320		14	%	371,139		13	%	292,724		10	%
Rest of Asia	279,700		10	%	470,208		16	%	246,162		9	%
Total	$	2,814,049	100	%	$	2,929,408	100	%	$	2,842,781	100	%

A significant portion of our revenues continues to be generated in Asia, where a substantial portion of the world’s semiconductor manufacturing capacity is located, and we expect that trend to continue.

Gross margin

Our gross margin fluctuates with revenue levels and product mix and is affected by variations in costs related to manufacturing and servicing our products, including our ability to scale our operations efficiently and effectively in response to prevailing business conditions.

The following table summarizes the major factors that contributed to the changes in gross margin percentage:



	Gross Margin Percentage
Fiscal year ended June 30, 2013	56.5	%
Revenue volume of products and services	—	%
Mix of products and services sold	(0.3	)%
Manufacturing labor, overhead and efficiencies	0.2	%
Other service and manufacturing costs	1.5	%
Fiscal year ended June 30, 2014	57.9	%
Revenue volume of products and services	(1.1	)%
Mix of products and services sold	0.3	%
Manufacturing labor, overhead and efficiencies	(0.6	)%
Other service and manufacturing costs	0.3	%
Fiscal year ended June 30, 2015	56.8	%

Changes in gross margin percentage driven by revenue volume of products and services reflect our ability to leverage existing infrastructure to generate higher revenues. It also includes the effect of fluctuations in foreign exchange rates, average customer pricing and customer revenue deferrals associated with volume purchase agreements. Changes in gross margin percentage from mix of products and services sold reflect the impact of changes in the composition within product and service offerings. Changes in gross margin percentage from manufacturing labor, overhead and efficiencies reflect our ability to manage costs and drive productivity as we scale our manufacturing activity to respond to customer requirements; this includes the impact of capacity utilization, use of overtime and variability of cost structure. Changes in gross margin percentage from other service and manufacturing costs include the impact of customer support costs, including the efficiencies with which we deliver services to our customers, and the effectiveness with which we manage our production plans and inventory risk.

Our gross margin decreased to 56.8% during the fiscal year ended June 30, 2015 from 57.9% during the fiscal year ended June 30, 2014, primarily due to lower volume of products and services, as well as a reduction in manufacturing efficiencies driven by lower manufacturing output and severance-related expenses, a substantial amount of which is related to our global workforce reduction plan that we announced in the fourth quarter of the fiscal year ended June 30, 2015, refer to Note 15, “Restructuring Charges” for additional details. The above decreases were partially offset by a favorable mix of products and services sold and efficiencies derived from other service and manufacturing costs.

Table of Contents

Our gross margin increased to 57.9% during the fiscal year ended June 30, 2014 from 56.5% during the fiscal year ended June 30, 2013, primarily due to lower charges for inventory obsolescence as well as manufacturing and service efficiencies, partially offset by a less favorable mix of products and services sold.

Engineering, Research and Development (“R&D”)



	Year ended June 30,
(Dollar amounts in thousands)	2015			2014			2013			FY15 vs. FY14					FY14 vs. FY13
R&D expenses	$	530,616		$	539,469		$	487,832		$	(8,853	)	(2	)%	$	51,637		11	%
R&D expenses as a percentage of total revenues	19		%	18		%	17		%	1		%			1		%

R&D expenses may fluctuate with product development phases and project timing as well as our focused R&D efforts that are aligned with our overall business strategy. Historically, our R&D expenses have generally increased over time, primarily due to higher costs associated with advanced product and technology development projects. We incur significant costs associated with these projects, including compensation for engineering talent, engineering material costs, and other expenses, as technological innovation is essential to our success. One of the goals of our plan to reduce our global employee workforce is to streamline our organization and business processes and direct our resources toward our best opportunities.

R&D expenses during the fiscal year ended June 30, 2015 were lower compared to the fiscal year ended June 30, 2014, primarily due to a decrease in engineering materials and consulting costs of $19.8 million associated with the completion of major platform developments, a decrease in depreciation expense of $2.1 million and a decrease in travel expenses of $1.2 million. This was partially offset by an increase in employee-related expenses of $10.6 million mainly as a result of our severance-related expenses, a substantial amount of which is related to our global workforce reduction plan that we announced in the fourth quarter of the fiscal year ended June 30, 2015, refer to Note 15, “Restructuring Charges” for additional details. In addition, the decrease was partially offset by a $6.3 million reduction in external funding used to offset the cost of R&D activities.

R&D expenses during the fiscal year ended June 30, 2014 were higher compared to the fiscal year ended June 30, 2013, primarily due to an increase in employee-related expenses of $41.8 million as a result of hiring additional engineering talent and an increase in travel expenses of $2.6 million, as well as a $4.2 million reduction in external funding used to offset the cost of R&D activities.

R&D expenses include the benefit of $1.9 million, $8.2 million and $12.4 million of external funding received during the fiscal years ended June 30, 2015, 2014 and 2013, respectively, for certain strategic development programs, primarily from government grants.

Our future operating results will depend significantly on our ability to produce products and provide services that have a competitive advantage in our marketplace. To do this, we believe that we must continue to make substantial and focused investments in our research and development. We remain committed to product development in new and emerging technologies as we address the yield challenges our customers face at future technology nodes.

Table of Contents

Selling, General and Administrative (“SG&A”)



	Year ended June 30,
(Dollar amounts in thousands)	2015			2014			2013			FY15 vs. FY14					FY14 vs. FY13
SG&A expenses	$	406,864		$	384,907		$	387,812		$	21,957		6	%	$	(2,905	)	(1	)%
SG&A expenses as a percentage of total revenues	14		%	13		%	14		%	1		%			(1		)%

SG&A expenses during the fiscal year ended June 30, 2015 were higher compared to the fiscal year ended June 30, 2014, primarily due to an increase in employee-related expenses of $8.3 million mainly as a result of severance-related expenses, a substantial amount of which is related to our global workforce reduction plan that we announced in the fourth quarter of the fiscal year ended June 30, 2015 (refer to Note 15, “Restructuring Charges” for additional details), an increase in cost of support for sales evaluation of $6.5 million, an increase in certain expenses of $2.5 million as a result of our one-time leveraged recapitalization expense that was completed in the three months ended December 31, 2014, a payment related to a contractual settlement for $2.0 million, an increase due to the impairment charge recorded for certain long-lived assets of $1.7 million and an increase in legal fees of $1.6 million. In addition, during the three months ended December 31, 2013, SG&A expenses were favorably impacted by our receipt of $1.1 million in proceeds from a class action settlement, as well as our recovery of $1.1 million in receivables that had previously been classified as a bad debt expense during the three months ended December 31, 2013, both of which resulted in a decrease of our SG&A expense for the fiscal year ended June 30, 2014. The increases described above were partially offset by a decrease in travel related expenses of $4.3 million and a decrease in marketing-related expenses of $1.9 million.

SG&A expenses during the fiscal year ended June 30, 2014 were slightly lower compared to the fiscal year ended June 30, 2013, primarily due to lower levels of consulting expenses of $4.5 million and a decrease in amortization of intangible assets of $2.6 million as some intangible assets became fully amortized. This was partially offset by an increase in employee-related expenses of $4.4 million as a result of hiring additional personnel.

Restructuring Charges

In April 2015, we announced a plan to reduce our global employee workforce to streamline our organization and business processes in response to changing customer requirement in our industry. The goals of this reduction are to enable continued innovation, direct our resources toward our best opportunities and lower our ongoing expense run rate. We expect to recognize significant cost savings from a number of activities we have recently undertaken, including estimated annual cost savings of approximately $100 million of employee related costs as a result of our announced global employee workforce reduction. During the fiscal year ended June 30, 2015, we recorded a $31.6 million net restructuring charge, of which $8.0 million was recorded to costs of revenues, $11.1 million to engineering, research and development expense and $12.5 million to selling, general and administrative expense. A net restructuring charge amounting to $22.4 million was recorded during the fourth quarter of fiscal year ended June 30, 2015, a substantial majority of which was related to our global workforce reduction plan. Refer to Note 15, “Restructuring Charges” for additional details.

The following table shows the activity primarily related to accrual for severance and benefits expense for the fiscal year ended June 30, 2015:



(In thousands)	Year ended June 30, 2015
Beginning Balance	$	2,329
Restructuring costs	31,569
Adjustments	1,177
Cash payments	(10,188		)
Ending Balance	$	24,887

The accrual for severance and benefits as of June 30, 2015 is expected to be paid out by the end of our fiscal quarter ending December 31, 2015.

We expect to incur additional charges, including additional severance costs and other related costs, in connection with the completion of our global workforce reduction during the first two quarters of fiscal year 2016.

Table of Contents

Interest Expense and Other Expense (Income), Net



	Year ended June 30,
(Dollar amounts in thousands)	2015			2014			2013
Interest expense	$	106,009		$	53,812		$	54,176
Other expense (income), net	$	(10,469	)	$	(16,203	)	$	(15,112	)
Interest expense as a percentage of total revenues	4		%	2		%	2		%
Other expense (income), net as a percentage of total revenues	—		%	1		%	1		%

The increase in interest expense during the fiscal year ended June 30, 2015 compared to the fiscal year ended June 30, 2014 was primarily attributable to the issuance of $2.50 billion aggregate principal amount of senior, unsecured long-term notes and entry into the $750 million unsecured prepayable term loan facility during the three months ended December 31, 2014, as compared to $750 million of 2018 Senior Notes for the fiscal year ended June 30, 2014. The interest expense during the fiscal year ended June 30, 2014 remained relatively unchanged compared to the fiscal year ended June 30, 2013.

Other expense (income), net is comprised primarily of realized gains or losses on sales of marketable securities, gains or losses from revaluations of certain foreign currency denominated assets and liabilities as well as foreign currency contracts, impairments associated with equity investments in privately-held companies, interest related accruals (such as interest and penalty accruals related to our tax obligations) and interest income earned on our investment and cash portfolio. Since June 30, 2014, our investment balance for our marketable securities portfolio declined by $973 million as a result of our strategic decision to liquidate certain marketable securities in our investment portfolio to fund our working capital requirements. With this decision, our interest income earned from our investment portfolio is expected to decline and the realized gains as a result of liquidation of our investment portfolio are not expected to recur.

The decrease in other expense (income), net during the fiscal year ended June 30, 2015 compared to the fiscal year ended June 30, 2014 was primarily attributable to a net decline of $4.7 million in gains from the sale of equity investments in privately-held companies, a $1.1 million decrease in interest income from our investment portfolio as a result of our decision to liquidate certain marketable securities and a $1.1 million increase in net foreign currency losses resulting from the volatility of the foreign currencies against the U.S. dollar, which was partially offset by a decrease in an impairment charge of $1.0 million related to an equity investment in a privately-held company that was deemed to be other-than-temporary impairment and an increase of $0.9 million of realized gains from the investment portfolio liquidation.

The increase in other expense (income), net during the fiscal year ended June 30, 2014 compared to the fiscal year ended June 30, 2013 was primarily attributable to an increase of $3.7 million gain from the sale of an equity investment in a privately-held company, partially offset by an impairment charge of $1.4 million recognized during the three months ended December 31, 2013 related to an equity investment in a privately-held company that was deemed to be other-than-temporary impairment, and a decrease in interest income of $1.3 million driven by lower interest rates.

Loss on extinguishment of debt and other, net

For the fiscal year ended June 30, 2015, loss on extinguishment of debt and other, net, reflected a pre-tax net loss of $131.7 million associated with the redemption of our $750 million of 2018 Senior Notes during the three months ended December 31, 2014. Included in the loss on extinguishment of debt and other, net is the $1.2 million gain on the non-designated forward contract that was entered into by us in anticipation of the redemption of the 2018 Senior Notes, which were redeemed during the three months ended December 31, 2014. Refer to “Note 7, Debt” and “Note 16, Derivative Instruments and Hedging Activities” for further details. We had no loss on extinguishment of debt and other, net, in the fiscal years ended June 30, 2014 and 2013.

Table of Contents

Provision for Income Taxes

The following table provides details of income taxes:



	Year ended June 30,
(Dollar amounts in thousands)	2015			2014			2013
Income before income taxes	$	434,131		$	734,461		$	690,621
Provision for income taxes	$	67,973		$	151,706		$	147,472
Effective tax rate	15.7		%	20.7		%	21.4		%

The provision for income taxes differs from the statutory U.S. federal rate primarily due to foreign income with lower tax rates, tax credits, and other domestic incentives.

Tax expense as a percentage of income during the fiscal year ended June 30, 2015 was 15.7% compared to 20.7% for the fiscal year ended June 30, 2014. Tax expense as a percentage of income decreased primarily due to an increase in our research and development credits, an increase in the domestic manufacturing deduction as a percentage of income, and a decrease in the percentage of income earned in the U.S. as a result of the loss on extinguishment of debt compared to income earned outside the U.S. in jurisdictions with lower tax rates.

Tax expense as a percentage of income during the fiscal year ended June 30, 2014 was 20.7% compared to 21.4% for the fiscal year ended June 30, 2013. Tax expense decreased primarily due to a decrease in tax reserves and an increase in the percentage of our revenues that were earned outside the U.S. in jurisdictions with lower tax rates, partially offset by a decrease in our research and development credits and an increase in tax expense related to employee stock activity.

Our future effective income tax rate depends on various factors, such as tax legislation, the geographic composition of our pre-tax income, the amount of our pre-tax income as business activities fluctuate, non-deductible expenses incurred in connection with acquisitions, research and development credits as a percentage of aggregate pre-tax income, the domestic manufacturing deduction, non-taxable or non-deductible increases or decreases in the assets held within our Executive Deferred Savings Plan, the tax effects of employee stock activity and the effectiveness of our tax planning strategies.

In the normal course of business, we are subject to tax audits in various jurisdictions, and such jurisdictions may assess additional income or other taxes against us. We are under a United States federal income tax examination for the fiscal year ended June 30, 2013. Although we believe our tax estimates are reasonable, the final determination of tax audits and any related litigation could be materially different from our historical income tax provisions and accruals. The results of an audit or litigation could have a material adverse effect on our results of operations or cash flows in the period or periods for which that determination is made.

Table of Contents

Liquidity and Capital Resources



	As of June 30,
(Dollar amounts in thousands)	2015			2014			2013
Cash and cash equivalents	$	838,025		$	630,861		$	985,390
Marketable securities	1,549,086			2,521,776			1,933,491
Total cash, cash equivalents and marketable securities	$	2,387,111		$	3,152,637		$	2,918,881
Percentage of total assets	49		%	57		%	55		%

	Year ended June 30,
(In thousands)	2015			2014			2013
Cash flows:
Net cash provided by operating activities	$	605,906		$	778,886		$	913,188
Net cash provided by (used in) investing activities	918,221			(676,109		)	(241,447		)
Net cash used in financing activities	(1,302,972		)	(458,887		)	(428,510		)
Effect of exchange rate changes on cash and cash equivalents	(13,991		)	1,581			(9,135		)
Net increase (decrease) in cash and cash equivalents	$	207,164		$	(354,529	)	$	234,096

Cash and Cash Equivalents and Marketable Securities:

As of June 30, 2015, our cash, cash equivalents and marketable securities totaled $2.39 billion, which is a decrease of $766 million from June 30, 2014. The decrease is primarily attributable to payment of a special cash dividend of approximately $2.72 billion, payment of regular quarterly cash dividends of $324.8 million, payment for the redemption of our 2018 Senior Notes of $877.4 million, payment for stock repurchases of $602.9 million, payment of principal amount and prepayment of term loans and interest with respect to Senior Notes, term loans and unfunded revolving credit facility aggregating to $98.3 million, payment of interest up to the redemption date with respect to our 2018 Senior Notes of $32.8 million, partially offset by net proceeds of an aggregate of $3.22 billion from our issuance of Senior Notes, borrowings under our five-year senior unsecured prepayable term loans under our Credit Facility, and net proceeds from cash generated from operating activities. As of June 30, 2015, $1.47 billion of our $2.39 billion of cash, cash equivalents, and marketable securities were held by our foreign subsidiaries and branch offices. We currently intend to permanently reinvest $1.34 billion of the cash held by our foreign subsidiaries and branch offices. If, however, a portion of these funds were to be repatriated to the United States, we would be required to accrue and pay U.S. and foreign taxes of approximately 30%-50% of the funds repatriated. The amount of taxes due will depend on the amount and manner of the repatriation, as well as the location from which the funds are repatriated. We have accrued (but have not paid) U.S. taxes on the remaining cash of $136.3 million of the $1.47 billion held by our foreign subsidiaries and branch offices. As such, these funds can be returned to the U.S. without accruing any additional U.S. tax expense.

Cash Dividends and Special Cash Dividend:

The total amount of regular quarterly cash dividends paid during the fiscal years ended June 30, 2015, 2014 and 2013 was $324.8 million, $298.9 million and $265.9 million, respectively. The increase in the amount of regular quarterly cash dividends paid during the fiscal year ended June 30, 2015 reflected the increase in the level of our regular quarterly cash dividend from $0.45 to $0.50 per share that was instituted during the three months ended September 30, 2014. The amount of accrued dividends payable for regular quarterly cash dividends on unvested restricted stock units with dividend equivalent rights was $0.9 million as of June 30, 2015. We did not have accrued dividends payable in the fiscal years ended June 30, 2014 and 2013. These amounts will be paid upon vesting of the underlying unvested restricted stock units as described in Note 8, “Equity and Long-term Incentive Compensation Plans.” On July 14, 2015, we announced that our Board of Directors had authorized a further increase in the level of our quarterly cash dividend from $0.50 to $0.52 per share. Refer to Note 19, “Subsequent Events” for additional information regarding the quarterly cash dividend increase announced subsequent to June 30, 2015.

Table of Contents

On November 19, 2014, we declared a special cash dividend of $16.50 per share on our outstanding common stock which was paid on December 9, 2014 to our stockholders of record as of the close of business on December 1, 2014. Additionally, in connection with the special cash dividend, our Board of Directors and our Compensation Committee of our Board of Directors approved a proportionate and equitable adjustment to outstanding equity awards (restricted stock units and stock options) under the 2004 Equity Incentive Plan (the “2004 Plan”), as required by the 2004 Plan, subject to the vesting requirements of the underlying awards. As the adjustment was required by the 2004 Plan, the adjustment to the outstanding awards did not result in any incremental compensation expense due to modification of such awards, under the authoritative guidance. The declaration and payment of the special cash dividend was part of our leveraged recapitalization transaction under which the special cash dividend was financed through a combination of existing cash and proceeds from the debt financing disclosed in Note 7, “Debt” that was completed during the three months ended December 31, 2014. The total amount of the special cash dividend accrued by the Company during the three months ended December 31, 2014 was approximately $2.76 billion, substantially all of which was paid out during the three months ended December 31, 2014. As of June 30, 2015, we have $41.1 million accrued dividends payable for the special cash dividend with respect to outstanding unvested restricted stock units, which will be paid when such underlying unvested restricted stock units vest as described in detail in Note 8, “Equity and Long-term Incentive Compensation Plans.” We did not declare any special cash dividend in the fiscal years ended June 30, 2014 and 2013. Other than the special cash dividend declared during the three months ended December 31, 2014, we historically have not declared any special cash dividends.

Stock Repurchases:

The shares repurchased under our stock repurchase program have decreased our basic and diluted weighted-average shares outstanding for the fiscal year ended June 30, 2015 compared to the fiscal year ended June 30, 2014. The stock repurchase program is intended, in part, to offset shares issued in connection with the purchases under our ESPP program, the vesting of employee restricted stock units and the exercise of employee stock options.

Fiscal Year 2015 Compared to Fiscal Year 2014

Cash Flows from Operating Activities:

We have historically financed our liquidity requirements through cash generated from operations. Net cash provided by operating activities during the fiscal year ended June 30, 2015 decreased compared to the fiscal year ended June 30, 2014, from $779 million to $606 million primarily as a result of the following key factors:


•	A decrease of cash collections by approximately $270 million during the fiscal year ended June 30, 2015 compared to the fiscal year ended June 30, 2014,


•	An increase of debt-related interest payments of approximately $40 million during the fiscal year ended June 30, 2015 compared to the fiscal year ended June 30, 2014,


•	An increase in payments of approximately $15 million upon vesting of cash-based long-term incentive ("Cash LTI") awards during the fiscal year ended June 30, 2015 under our Cash LTI employee compensation plan, compared to the fiscal year ended June 30, 2014,


•	An increase in payroll payments of approximately $15 million during the fiscal year ended June 30, 2015 compared to the fiscal year ended June 30, 2014, partially offset by


•	A decrease in accounts payable payments of approximately $143 million during the fiscal year ended June 30, 2015 compared to the fiscal year ended June 30, 2014, and


•	A decrease in income tax and other tax payments net of tax refunds of approximately $30 million during the fiscal year ended June 30, 2015 compared to the fiscal year ended June 30, 2014.

Cash Flows from Investing Activities:

Net cash provided by investing activities during the fiscal year ended June 30, 2015 increased to $918 million compared to the fiscal year ended June 30, 2014 from net cash used in investing activities of $676 million, primarily as a result of an increase in the proceeds from sale of available-for-sale and trading securities, net of sales and maturities, of approximately $964 million during the fiscal year ended June 30, 2015, compared to the purchases of available-for-sale and trading securities, net of sales and maturities, of approximately $593 million during fiscal year ended June 30, 2014. In addition, we acquired a privately-held company for a total purchase consideration of $18 million in cash during the fiscal year ended June 30, 2014.

Table of Contents

Cash Flows from Financing Activities:

Net cash used in financing activities during the fiscal year ended June 30, 2015 increased compared to the fiscal year ended June 30, 2014, from $459 million to $1.30 billion, primarily as a result of the following key factors:


•	An increase in dividend payments of $2.74 billion during the fiscal year ended June 30, 2015 compared to the fiscal year ended June 30, 2014, reflecting the payments for the special cash dividend during the fiscal year ended June 30, 2015 and an increase in our quarterly dividend payout amount from $0.45 to $0.50 per share that was instituted during the three months ended September 30, 2014,


•	Payments for redemption of the 2018 Senior Notes and payments for the term loans, including prepayment for the principal amount for the term loans, aggregating to $916 million during the fiscal year ended June 30, 2015, whereas no such payments were made during the fiscal year ended June 20, 2014,


•	An increase in common stock repurchases of $362 million during the fiscal year ended June 30, 2015 compared to the fiscal year ended June 30, 2014 and


•	A decrease in proceeds from the exercise of stock options of $65 million during the fiscal year ended June 30, 2015 compared to the fiscal year ended June 30, 2014, partially offset by


•	Net proceeds of $3.22 billion from issuance of Senior Notes and the term loans during the fiscal year ended June 30, 2015.

Fiscal Year 2014 Compared to Fiscal Year 2013

Cash Flows from Operating Activities:

Net cash provided by operating activities during the fiscal year ended June 30, 2014 decreased compared to the fiscal year ended June 30, 2013, from $913 million to $779 million primarily as a result of the following key factors:


•	An increase in payroll of approximately $44 million during the fiscal year ended June 30, 2014 compared to the fiscal year ended June 30, 2013,


•	An increase in accounts payable payments of approximately $39 million during the fiscal year ended June 30, 2014 compared to the fiscal year ended June 30, 2013,


•	An increase in income tax and other tax payments of approximately $19 million during the fiscal year ended June 30, 2014 compared to the fiscal year ended June 30, 2013 and


•	Payments of approximately $15 million upon vesting of Cash LTI awards during the fiscal year ended June 30, 2014 under our Cash LTI employee compensation plan, whereas no such payments occurred during the fiscal year ended June 30, 2013.

Cash Flows from Investing Activities:

Net cash used in investing activities during the fiscal year ended June 30, 2014 increased compared to the fiscal year ended June 30, 2013 from $241 million to $676 million, primarily as a result of an increase in the use of cash for purchases of available-for-sale and trading securities, net of sales and maturities, of approximately $424 million during the fiscal year ended June 30, 2014 compared to the fiscal year ended June 30, 2013. In addition, we acquired a privately-held company for a total purchase consideration of $18 million in cash during the fiscal year ended June 30, 2014.

Cash Flows from Financing Activities:

Net cash used in financing activities during the fiscal year ended June 30, 2014 increased compared to the fiscal year ended June 30, 2013 from $429 million to $459 million, primarily as a result of the following key factors:


•	An increase in dividend payments of $33 million during the fiscal year ended June 30, 2014 compared to the fiscal year ended June 30, 2013, mainly due to an increase in the quarterly dividend payout amount that we announced in July 2013, and


•	A decrease in proceeds from the exercise of stock options of $14 million during the fiscal year ended June 30, 2014 compared to the fiscal year ended June 30, 2013, partially offset by


•	A decrease in common stock repurchases of $32 million during the fiscal year ended June 30, 2014 compared to the fiscal year ended June 30, 2013.

Table of Contents

Debt Issuance - Senior Notes:

In November 2014, we issued $2.50 billion aggregate principal amount of senior, unsecured long-term notes (collectively referred to as “Senior Notes”). We issued the Senior Notes as part of the leveraged recapitalization plan under which the proceeds from the Senior Notes in conjunction with the proceeds from the term loans (described below) and cash on hand were used (x) to fund a special cash dividend of $16.50 per share, aggregating to approximately $2.76 billion, (y) to redeem $750 million of 2018 Senior Notes, including associated redemption premiums, accrued interest and other fees and expenses and (z) for other general corporate purposes, including repurchases of shares pursuant to our stock repurchase program. The interest rate specified for each series of the Senior Notes will be subject to adjustments from time to time if Moody’s Investor Service, Inc. (“Moody’s”) or Standard & Poor’s Ratings Services (“S&P”) or, under certain circumstances, a substitute rating agency selected by us as a replacement for Moody’s or S&P, as the case may be (a “Substitute Rating Agency”), downgrades (or subsequently upgrades) its rating assigned to the respective series of Senior Notes such that the adjusted rating is below investment grade. If the adjusted rating of any series of Senior Notes from Moody’s (or, if applicable, any Substitute Rating Agency) is decreased to Ba1, Ba2, Ba3 or B1 or below, the stated interest rate on such series of Senior Notes as noted above will increase by 25 bps, 50 bps, 75 bps or 100 bps, respectively (“bps” refers to Basis Points and 1% is equal to 100 bps). If the rating of any series of Senior Notes from S&P (or, if applicable, any Substitute Rating Agency) with respect to such series of Senior Notes is decreased to BB+, BB, BB- or B+ or below, the stated interest rate on such series of Senior Notes as noted above will increase by 25 bps, 50 bps, 75 bps or 100 bps, respectively. The interest rates on any series of Senior Notes will permanently cease to be subject to any adjustment (notwithstanding any subsequent decrease in the ratings by any of Moody’s, S&P and, if applicable, any Substitute Rating Agency) if such series of Senior Notes becomes rated “Baa1” (or its equivalent) or higher by Moody’s (or, if applicable, any Substitute Rating Agency) and “BBB+” (or its equivalent) or higher by S&P (or, if applicable, any Substitute Rating Agency), or one of those ratings if rated by only one of Moody’s, S&P and, if applicable, any Substitute Rating Agency, in each case with a stable or positive outlook. In October 2014, we entered into a series of forward contracts to lock the 10-year treasury rate (“benchmark rate”) on a portion of the Senior Notes with a notional amount of $1.00 billion in aggregate. For additional details, refer to Note 16, “Derivative Instruments and Hedging Activities.”

The original discount on the Senior Notes amounted to $4.0 million and is being amortized over the life of the debt. Interest is payable semi-annually on May 1 and November 1 of each year. The debt indenture (the “Indenture”) includes covenants that limit our ability to grant liens on its facilities and enter into sale and leaseback transactions, subject to certain allowances under which certain sale and leaseback transactions are not restricted. As of June 30, 2015, we were in compliance with all of the covenants under the Indenture associated with the Senior Notes.

Debt Issuance - Credit Facility (Term Loans and Unfunded Revolving Credit Facility):

In November 2014, we entered into $750 million of five-year senior unsecured prepayable term loans and a $500 million unfunded revolving credit facility (collectively, the “Credit Facility”) under the Credit Agreement. The interest under the Credit Facility will be payable on the borrowed amounts at the London Interbank Offered Rate (“LIBOR”) plus a spread, which is currently 125 bps, and this spread is subject to adjustment in conjunction with our credit rating downgrades or upgrades by Moody’s and S&P. The spread ranges from 100 bps to 175 bps based on the then effective credit rating. We are also obligated to pay an annual commitment fee of 15 bps on the daily undrawn balance of the revolving credit facility, which is also subject to an adjustment in conjunction with our credit rating downgrades or upgrades. The annual commitment fee ranges from 10 bps to 25 bps on the daily undrawn balance of the revolving credit facility, depending upon the then effective credit rating. Principal payments with respect to the term loans will be made on the last day of each calendar quarter and any unpaid principal balance of the term loans, including accrued interest, shall be payable on November 14, 2019 (the “Maturity Date”). We may prepay the term loans and unfunded revolving credit facility at any time without a prepayment penalty. During the fourth quarter of fiscal year ended June 30, 2015, the Company prepaid additional principal of $20.0 million in addition to the scheduled quarterly payments for the term loans.

Future principal payments for the term loans (without giving effect for any prepayments made) as of June 30, 2015, are as follows:



Fiscal Quarters Ending	Quarterly Payment (in thousands)
June 30, 2015 through December 31, 2016	$	9,375
March 31, 2017 through December 31, 2017	$	14,063
March 31, 2018 through September 30, 2019	$	18,750
December 31, 2019	$	487,500

Table of Contents

The Credit Facility requires us to maintain an interest expense coverage ratio as described in the Credit Agreement, on a quarterly basis, covering the trailing four consecutive fiscal quarters of no less than 3.50 to 1.00. In addition, we are required to maintain the maximum leverage ratio as described in the Credit Agreement, on a quarterly basis, covering the trailing four consecutive fiscal quarters for the fiscal quarters as described below.



Fiscal Quarters Ending		Maximum Leverage Ratio
June 30, 2015		4.25:1.00
September 30, 2015 and December 31, 2015		4.00:1.00
March 31, 2016 through September 30, 2016		3.75:1.00
December 31, 2016 and March 31, 2017		3.50:1.00
Thereafter		3.00:1.00

We were in compliance with the financial covenants under the Credit Agreement as of June 30, 2015 (the interest expense coverage ratio was 7.93 to 1.00 and the leverage ratio was 3.82 to 1.00) and had no outstanding borrowings under the unfunded revolving credit facility. Considering our current liquidity position, short-term financial forecasts and ability to prepay the term loans, if necessary, we expect to continue to be in compliance with our financial covenants at the end of our first quarter of fiscal year ending June 30, 2016.

Debt Redemption:

In December 2014, we redeemed the $750 million aggregate principal amount of 2018 Senior Notes. The redemption resulted in a pre-tax net loss on extinguishment of debt of $131.7 million for the three months ended December 31, 2014, which includes $1.2 million of gain upon the termination of the non-designated forward contract described below.

In addition, in November 2014, we entered into a non-designated forward contract to lock the treasury rate to be used for determining the redemption amount in connection with our redemption of the then outstanding 2018 Senior Notes that occurred during the three months ended December 31, 2014. The notional amount of the non-designated forward contract was $750 million. For additional details, refer to Note 16, “Derivative Instruments and Hedging Activities.”

Table of Contents

Contractual Obligations

The following is a schedule summarizing our significant obligations to make future payments under contractual obligations as of June 30, 2015:



	Fiscal year ending June 30,
(In thousands)	Total		2016		2017		2018		2019		2020		2021 and thereafter		Others
Debt obligations⁽¹⁾	$	3,211,250	$	17,500	$	46,875	$	315,625	$	75,000	$	756,250	$	2,000,000	$	—
Interest payment associated with all debt obligations⁽²⁾	1,060,852		119,117		118,606		114,796		110,711		100,310		497,312		—
Purchase commitments⁽³⁾	298,717		296,908		1,347		337		63		—		62		—
Income taxes payable⁽⁴⁾	76,939		—		—		—		—		—		—		76,939
Operating leases	21,381		8,008		5,818		3,964		1,815		1,220		556		—
Cash long-term incentive program ⁽⁵⁾	124,972		42,962		39,624		27,839		14,547		—		—		—
Pension obligations	21,546		3,034		1,348		1,570		1,559		1,413		12,622		—
Executive Deferred Savings Plan⁽⁶⁾	167,886		—		—		—		—		—		—		167,886
Other⁽⁷⁾	42,002		22,173		9,599		6,985		3,245		—		—		—
Total contractual cash obligations	$	5,025,545	$	509,702	$	223,217	$	471,116	$	206,940	$	859,193	$	2,510,552	$	244,825

__________________


(1)	In November 2014, we issued $750 million aggregate principal amount of term loans due in fiscal year 2020 (outstanding balance of $711.3 million as of June 30, 2015) and $2.50 billion aggregate principal amount of Senior Notes due from fiscal year 2018 to fiscal year 2035.

(2)

The interest payments associated with the Senior Notes obligations included in the table above are based on the principal amount multiplied by the applicable coupon rate for each series of Senior Notes. Our future interest payments are subject to change if our then effective credit rating is below investment grade as discussed above. The interest payments under the term loans are payable on the borrowed amounts at the LIBOR plus 125 bps. As of June 30, 2015, we utilized the existing interest rates to project our estimated term loans interest payments for the next five years. The interest payment under the revolving credit facility for the undrawn balance is payable at 15 bps as a commitment fee based on the daily undrawn balance and we utilized the existing rate for the projected interest payments included in the table above. Our future interest payments for the term loans and the revolving credit facility are subject to change due to future fluctuations in the LIBOR rates as well as any upgrades or downgrades to our then effective credit rating.

(3)

Represents an estimate of significant commitments to purchase inventory from our suppliers as well as an estimate of significant purchase commitments associated with other goods and services in the ordinary course of business. Our liability under these purchase commitments is generally restricted to a forecasted time-horizon as mutually agreed upon between the parties. This forecasted time-horizon can vary among different suppliers. Actual expenditures will vary based upon the volume of the transactions and length of contractual service provided. In addition, the amounts paid under these arrangements may be less in the event the arrangements are renegotiated or canceled. Certain agreements provide for potential cancellation penalties.


(4)	Represents the estimated income tax payable obligation related to uncertain tax positions as well as related accrued interest. We are unable to make a reasonably reliable estimate of the timing of payments in individual years due to uncertainties in the timing of tax audit outcomes.


(5)	Represents the amount committed under our cash long-term incentive program. The expected payment after estimated forfeitures is approximately $101.8 million.


(6)	Represents the amount committed under our non-qualified executive deferred compensation plan. We are unable to make a reasonably reliable estimate of the timing of payments in individual years due to the uncertainties in the timing around participant’s separation and any potential changes that participants may decide to make to the previous distribution elections.


(7)	Represents the amount committed for accrued dividends payable, substantially all of which are for the special cash dividend for the unvested restricted stock units as of the dividend record date as well as restricted stock units granted with dividend equivalent rights. For additional details, refer to Note 8, “Equity and Long-term Incentive Compensation Plans”.

Table of Contents

Starting in fiscal year 2013 we adopted a cash-based long-term incentive (“Cash LTI”) program for many of our employees as part of our employee compensation program. Cash LTI awards issued to employees under the Cash Long-Term Incentive Plan (“Cash LTI Plan”) generally vest in four equal installments, with 25% of the aggregate amount of the Cash LTI award vesting on each yearly anniversary of the grant date over a four-year period. In order to receive payments under the Cash LTI Plan, participants must remain employed by us as of the applicable award vesting date.

We have agreements with financial institutions to sell certain of our trade receivables and promissory notes from customers without recourse. In addition, we periodically sell certain letters of credit (“LCs”), without recourse, received from customers in payment for goods.

The following table shows total receivables sold under factoring agreements and proceeds from sales of LCs for the indicated periods:



	Year ended June 30,
(In thousands)	2015		2014		2013
Receivables sold under factoring agreements	$	137,285	$	116,292	$	144,307
Proceeds from sales of LCs	$	6,920	$	8,323	$	3,808

Factoring and LC fees for the sale of certain trade receivables were recorded in other expense (income), net and were not material for the periods presented.

We maintain guarantee arrangements available through various financial institutions for up to $22.5 million, of which $19.0 million had been issued as of June 30, 2015, primarily to fund guarantees to customs authorities for value-added tax (“VAT”) and other operating requirements of our subsidiaries in Europe and Asia.

We maintain certain open inventory purchase commitments with our suppliers to ensure a smooth and continuous supply for key components. Our liability under these purchase commitments is generally restricted to a forecasted time-horizon as mutually agreed upon between the parties. This forecasted time-horizon can vary among different suppliers. Our open inventory purchase commitments were approximately $298.7 million as of June 30, 2015 and are primarily due within the next 12 months. Actual expenditures will vary based upon the volume of the transactions and length of contractual service provided. In addition, the amounts paid under these arrangements may be less in the event that the arrangements are renegotiated or canceled. Certain agreements provide for potential cancellation penalties.

We provide standard warranty coverage on our systems for 40 hours per week for 12 months, providing labor and parts necessary to repair the systems during the warranty period. We account for the estimated warranty cost as a charge to costs of revenues when revenue is recognized. The estimated warranty cost is based on historical product performance and field expenses. The actual product performance and/or field expense profiles may differ, and in those cases we adjust our warranty accruals accordingly. The difference between the estimated and actual warranty costs tends to be larger for new product introductions as there is limited historical product performance to estimate warranty expense; our warranty charge estimates for more mature products with longer product performance histories tend to be more stable. Non-standard warranty coverage generally includes services incremental to the standard 40-hours per week coverage for 12 months. See Note 13, “Commitments and Contingencies” to the Consolidated Financial Statements for a detailed description.

Working Capital:

Working capital was $2.90 billion as of June 30, 2015, which was a decrease of $787.7 million compared to our working capital as of June 30, 2014. The decrease in working capital is primarily attributable to payment of a special cash dividend of approximately $2.72 billion, payment of regular quarterly cash dividends of $324.8 million, payment for the redemption of the 2018 Senior Notes of $877.4 million, payment for stock repurchases of $602.9 million, payment of principal amount and prepayment of term loans and interest with respect to Senior Notes, term loans and unfunded revolving credit facility aggregating to $98.3 million, payment of interest up to the redemption date with respect to our 2018 Senior Notes of $32.8 million, partially offset by the aggregate of net proceeds of $3.22 billion from the issuance of Senior Notes and borrowings under our prepayable term loans. As of June 30, 2015, our principal sources of liquidity consisted of $2.39 billion of cash, cash equivalents and marketable securities. Our liquidity is affected by many factors, some of which are based on the normal ongoing operations of the business, and others of which relate to the uncertainties of global and regional economies and the semiconductor and the semiconductor equipment industries. Although cash requirements will fluctuate based on the timing and extent of these factors, we believe that cash generated from operations, together with the liquidity provided by existing cash and cash equivalents balances and our $500 million unfunded revolving credit facility, will be sufficient to satisfy our liquidity requirements associated with working capital needs, capital expenditures, dividends, stock repurchases and other contractual obligations, including repayment of outstanding debt, for at least the next 12 months.

Table of Contents

Our credit ratings and outlooks as of June 30, 2015 are summarized below:



Rating Agency	Rating	Outlook
Fitch	BBB-	Stable
Moody’s	Baa2	Stable
Standard & Poor’s	BBB	Stable

Factors that can affect our credit ratings include changes in our operating performance, the economic environment, conditions in the semiconductor and semiconductor equipment industries, our financial position and changes in our business strategy.

Off-Balance Sheet Arrangements

Under our foreign currency risk management strategy, we utilize derivative instruments to protect our interests from unanticipated fluctuations in earnings and cash flows caused by volatility in currency exchange rates. This financial exposure is monitored and managed as an integral part of our overall risk management program, which focuses on the unpredictability of financial markets and seeks to reduce the potentially adverse effects that the volatility of these markets may have on our operating results. We continue our policy of hedging our current and forecasted foreign currency exposures with hedging instruments having tenors of up to 18 months (see Note 16, “Derivative Instruments and Hedging Activities” to the Consolidated Financial Statements for a detailed description). Our outstanding hedge contracts, with maximum maturity of 16 months, were as follows:



	As of June 30,
(In thousands)	2015		2014
Cash flow hedge contracts
Purchase	$	32,775	$	6,066
Sell	$	88,800	$	33,999
Other foreign currency hedge contracts
Purchase	$	64,012	$	108,901
Sell	$	123,091	$	106,322

In October 2014, in anticipation of the issuance of the Senior Notes, we entered into a series of forward contracts (“Rate Lock Agreements”) to lock the benchmark rate on a portion of the Senior Notes. The objective of the Rate Lock Agreements was to hedge the risk associated with the variability in interest rates due to the changes in the benchmark rate leading up to the closing of the intended financing, on the notional amount being hedged. The Rate Lock Agreements had a notional amount of $1 billion in aggregate which matured in the second quarter of the fiscal year ended June 30, 2015. We designated each of the Rate Lock Agreements as a qualifying hedging instrument and accounted for as a cash flow hedge, under which the effective portion of the gain or loss on the close out of the Rate Lock Agreements was initially recognized in accumulated other comprehensive income (loss) as a reduction of total stockholders’ equity and subsequently amortized into earnings as a component of interest expense over the term of the underlying debt. The ineffective portion, if any, was recognized in earnings immediately. The Rate Lock Agreements were terminated on the date of pricing of the $1.25 billion of 4.650% Senior Notes due in 2024 and we recorded the fair value of a $7.5 million receivable as a gain within accumulated other comprehensive income (loss) as of December 31, 2014. For the fiscal year ended June 30, 2015, we recognized $0.5 million for the amortization of the gain recognized in accumulated other comprehensive income (loss), which amount reduced the interest expense. We did not record any ineffectiveness for the fiscal year ended June 30, 2015. The cash proceeds of $7.5 million from the settlement of the Rate Lock Agreements were included in the cash flows from operating activities in the consolidated statements of cash flows for the fiscal year ended June 30, 2015 because the designated hedged item was classified as interest expense in the cash flows from operating activities in the consolidated statements of cash flows.

In addition, in November 2014, we entered into a non-designated forward contract to lock the treasury rate used to determine the redemption amount of the 2018 Senior Notes that occurred during the three months ended December 31, 2014. The objective of the forward contract was to hedge the risk associated with the variability of the redemption amount due to changes in interest rates through the redemption of the existing 2018 Senior Notes. The forward contract had a notional amount of $750 million. The forward contract was terminated in December 2014 and the resulting fair value of $1.2 million receivable was included in the loss on extinguishment of debt and other, net line in the consolidated statements of operations, partially offsetting the loss on redemption of the debt during the three months ended December 31, 2014. The cash proceeds from the forward contract were included in the cash flows from financing activities in the consolidated statements of cash flows for the fiscal year ended June 30, 2015, partially offsetting the cash outflows for the redemption of the 2018 Senior Notes.

Table of Contents

Indemnification Obligations. Subject to certain limitations, we are obligated to indemnify our current and former directors, officers and employees with respect to certain litigation matters and investigations that arise in connection with their service to us. These obligations arise under the terms of our certificate of incorporation, our bylaws, applicable contracts, and Delaware and California law. The obligation to indemnify generally means that we are required to pay or reimburse the individuals’ reasonable legal expenses and possibly damages and other liabilities incurred in connection with these matters. For example, we have paid or reimbursed legal expenses incurred in connection with the investigation of our historical stock option practices and the related litigation and government inquiries by a number of our current and former directors, officers and employees. Although the maximum potential amount of future payments we could be required to make under the indemnification obligations generally described in this paragraph is theoretically unlimited, we believe the fair value of this liability, to the extent estimable, is appropriately considered within the reserve we have established for currently pending legal proceedings.

We are a party to a variety of agreements pursuant to which we may be obligated to indemnify the other party with respect to certain matters. Typically, these obligations arise in connection with contracts and license agreements or the sale of assets, under which we customarily agree to hold the other party harmless against losses arising from, or provide customers with other remedies to protect against, bodily injury or damage to personal property caused by our products, non-compliance with our product performance specifications, infringement of third-party intellectual property rights used in our products and a breach of warranties, representations and covenants related to matters such as title to assets sold, validity of certain intellectual property rights, non-infringement of third-party rights, and certain income tax-related matters. In each of these circumstances, payment by us is typically subject to the other party making a claim to and cooperating with us pursuant to the procedures specified in the particular contract. This usually allows us to challenge the other party’s claims or, in case of breach of intellectual property representations or covenants, to control the defense or settlement of any third-party claims brought against the other party. Further, our obligations under these agreements may be limited in terms of amounts, activity (typically at our option to replace or correct the products or terminate the agreement with a refund to the other party), and duration. In some instances, we may have recourse against third parties and/or insurance covering certain payments made by us.

In addition, we may in limited circumstances enter into agreements that contain customer-specific commitments on pricing, tool reliability, spare parts stocking levels, service response time and other commitments. Furthermore, we may give these customers limited audit or inspection rights to enable them to confirm that we are complying with these commitments. If a customer elects to exercise its audit or inspection rights, we may be required to expend significant resources to support the audit or inspection, as well as to defend or settle any dispute with a customer that could potentially arise out of such audit or inspection. To date, we have made no accruals in our consolidated financial statements for this contingency. While we have not in the past incurred significant expenses for resolving disputes regarding these types of commitments, we cannot make any assurance that we will not incur any such liabilities in the future.

It is not possible to predict the maximum potential amount of future payments under these or similar agreements due to the conditional nature of our obligations and the unique facts and circumstances involved in each particular agreement. Historically, payments made by us under these agreements have not had a material effect on our business, financial condition, results of operations or cash flows.

Table of Contents


ITEM 7A.	QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

We are exposed to financial market risks, including changes in interest rates, foreign currency exchange rates and marketable equity security prices. To mitigate these risks, we utilize derivative financial instruments, such as foreign currency hedges. All of the potential changes noted below are based on sensitivity analyses performed on our financial position as of June 30, 2015. Actual results may differ materially.

As of June 30, 2015, we had an investment portfolio of fixed income securities of $1.65 billion. These securities, as with all fixed income instruments, are subject to interest rate risk and will decline in fair value if market interest rates increase. If market interest rates were to increase immediately and uniformly by 100 bps from levels as of June 30, 2015, the fair value of the portfolio would have declined by $18.1 million.

In November 2014, we issued $2.50 billion aggregate principal amount of fixed rate senior, unsecured long-term notes (collectively referred to as “Senior Notes”) due in various fiscal years ranging from 2018 to 2035. The fair market value of long-term fixed interest rate notes is subject to interest rate risk. Generally, the fair market value of fixed interest rate notes will increase as interest rates fall and decrease as interest rates rise. As of June 30, 2015, the book value of our Senior Notes of $2.50 billion approximates the fair value. Additionally, the interest expense for the Senior Notes is subject to interest rate adjustments following a downgrade of our credit ratings below investment grade by the credit rating agencies. Following a rating change below investment grade, the stated interest rate for each series of Senior Notes may increase between 25 bps to 100 bps based on the adjusted credit rating. Refer to Note 7, “Debt” to the Consolidated Financial Statements in Part II, Item 8 and Management’s Discussion and Analysis of Financial Condition and Results of Operations, “Liquidity and Capital Resources,” in Part II, Item 7 for additional details. Factors that can affect our credit ratings include changes in our operating performance, the economic environment, conditions in the semiconductor and semiconductor equipment industries, our financial position, and changes in our business strategy. As of June 30, 2015, if our credit rating was downgraded below investment grade by Moody’s and S&P, the maximum potential increase to our annual interest expense on the Senior Notes, considering a 200 bps increase to the stated interest rate for each series of our Senior Notes, is estimated to be approximately $50.0 million.

In November 2014, we entered into $750 million aggregate principal amount of floating rate senior, unsecured prepayable term loans due in 2019 and a $500 million unfunded revolving credit facility. The interest rates for the term loans are based on LIBOR plus a fixed spread and this spread is subject to adjustment in conjunction with our credit rating downgrades or upgrades. The spread ranges from 100 bps to 175 bps based on the adjusted credit rating. The fair value of the term loans is subject to interest rate risk only to the extent of the fixed spread portion of the interest rates which does not fluctuate with change in interest rates. As of June 30, 2015, the difference between book value and fair value of our term loans was immaterial. We are also obligated to pay an annual commitment fee of 15 bps on the daily undrawn balance of the unfunded revolving credit facility which is also subject to an adjustment in conjunction with our credit rating downgrades or upgrades. The annual commitment fee ranges from 10 bps to 25 bps on the daily undrawn balance of the revolving credit facility, depending upon the then effective credit rating. As of June 30, 2015, if LIBOR-based interest rates increased by 100 bps, the change would increase our annual interest expense annually by approximately $6.3 million as it relates to our borrowings under the term loans. Additionally, as of June 30, 2015, if our credit rating was downgraded to be below investment grade, the maximum potential increase to our annual interest expense for the term loans and the revolving credit facility, using the highest range of the ranges discussed above, is estimated to be approximately $4.1 million.

See Note 4, “Marketable Securities” to the Consolidated Financial Statements in Part II, Item 8; Management’s Discussion and Analysis of Financial Condition and Results of Operations, “Liquidity and Capital Resources,” in Part II, Item 7; and Risk Factors in Part I, Item 1A of this Annual Report on Form 10-K for a description of recent market events that may affect the value of the investments in our portfolio that we held as of June 30, 2015.

As of June 30, 2015, we had net forward and option contracts to sell $115.1 million in foreign currency in order to hedge certain currency exposures (see Note 16, “Derivative Instruments and Hedging Activities” to the Consolidated Financial Statements for a detailed description). If we had entered into these contracts on June 30, 2015, the U.S. dollar equivalent would have been $115.1 million. A 10% adverse move in all currency exchange rates affecting the contracts would decrease the fair value of the contracts by $23.9 million. However, if this occurred, the fair value of the underlying exposures hedged by the contracts would increase by a similar amount. Accordingly, we believe that, as a result of the hedging of certain of our foreign currency exposure, changes in most relevant foreign currency exchange rates should have no material impact on our income or cash flows.

Table of Contents


ITEM 8.	FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA



Consolidated Balance Sheets as of June 30, 2015 and 2014	60

Consolidated Statements of Operations for each of the three years in the period ended June 30, 2015	61

Consolidated Statements of Comprehensive Income for each of the three years in the period ended June 30, 2015	62

Consolidated Statements of Stockholders’ Equity for each of the three years in the period ended June 30, 2015	63

Consolidated Statements of Cash Flows for each of the three years in the period ended June 30, 2015	64

Notes to Consolidated Financial Statements	65

Report of Independent Registered Public Accounting Firm	105

Table of Contents

KLA-TENCOR CORPORATION

Consolidated Balance Sheets



	As of June 30,
(In thousands, except par value)	2015