UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D. C. 20549

FORM 10–K

For the Fiscal Year Ended December 31, 2011

or

For the transition period from                    to                    

Commission File Number 1-8472

Hexcel Corporation

(Exact name of registrant as specified in its charter)

281 Tresser Boulevard
Stamford, Connecticut 06901

(Address of principal executive offices and zip code)

Registrant’s telephone number, including area code: (203) 969-0666

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  Yes x No o

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.  Yes o No x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes x No o

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  o

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).  Yes x No o

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).  Yes o No x

The aggregate market value of the registrant’s common stock held by non-affiliates was $2,109,541,949 based on the reported last sale price of common stock on June 30, 2011, which is the last business day of the registrant’s most recently completed second fiscal quarter.

The number of shares outstanding of each of the registrant’s classes of common stock, as of the latest practicable date.

Documents Incorporated by Reference:

Proxy Statement for Annual Meeting of Stockholders (to the extent specified herein) — Part III.

PART I

ITEM 1. Business.

General Development of Business

Hexcel Corporation, founded in 1946, was incorporated in California in 1948, and reincorporated in Delaware in 1983.  Hexcel Corporation and its subsidiaries (herein referred to as “Hexcel”, “the Company”, “we”, “us”, or “our”), is a leading advanced composites company.  We develop, manufacture, and market lightweight, high-performance composites, including carbon fibers, specialty reinforcements, prepregs and other fiber-reinforced matrix materials, adhesives, honeycomb, engineered honeycomb and composite structures, for use in Commercial Aerospace, Space & Defense and Industrial Applications. Our products are used in a wide variety of end applications, such as commercial and military aircraft, space launch vehicles and satellites, wind turbine blades, automotive, bikes, skis and a wide variety of recreational products and other industrial applications.

We serve international markets through manufacturing facilities, sales offices and representatives located in the Americas, Asia Pacific, Europe and Russia.  We are also an investor in a joint venture in Malaysia, which manufactures composite structures for Commercial Aerospace applications.

Narrative Description of Business and Segments

We are a manufacturer of products within a single industry: Advanced Composites.  Hexcel has two segments, Composite Materials and Engineered Products. The Composite Materials segment is comprised of our carbon fiber, specialty reinforcements, resins, prepregs and other fiber-reinforced matrix materials, and honeycomb core product lines.  The Engineered Products segment is comprised of lightweight high strength composite structures, molded components and specialty machined honeycomb product lines.

The following summaries describe the ongoing activities related to the Composite Materials and Engineered Products segments as of December 31, 2011.

Composite Materials

The Composite Materials segment manufactures and markets carbon fibers, fabrics and specialty reinforcements, prepregs and other fiber-reinforced matrix materials, structural adhesives, honeycomb, molding compounds, tooling materials, polyurethane systems and laminates that are incorporated into many applications, including military and commercial aircraft, wind turbine blades, recreational products, transport (cars, boats, trains) and other industrial applications.

2

The following table identifies the principal products and examples of the primary end-uses from the Composite Materials segment:

Carbon Fibers:  HexTow® carbon fibers are manufactured for sale to third-party customers as well as for our own use in manufacturing certain reinforcements and composite materials.  Carbon fibers are woven into carbon fabrics, used as reinforcement in conjunction with a resin matrix to produce pre-impregnated composite materials (referred to as “prepregs”).  Carbon fiber is also used in filament winding, hand layup, automatic tape layup and advanced fiber placement to produce finished composite components.  Key product applications include structural components for commercial and military aircraft, space launch vehicles, and certain other applications such as recreational and industrial equipment.

Industrial Fabrics and Specialty Reinforcements:  Industrial fabrics and specialty reinforcements are made from a variety of fibers, including carbon, aramid and other high strength polymers, several types of fiberglass, quartz, ceramic and other specialty fibers.  These reinforcements are used in the production of prepregs and other matrix materials used in primary and secondary structural aerospace applications such as wing components, horizontal and vertical stabilizer components, fairings, radomes and engine nacelles as well as overhead storage bins and other interior components.  Our reinforcements are also used in the manufacture of a variety of industrial and recreational products such as wind energy blades, automotive components, oil exploration and production equipment, boats, surfboards, skis and other sporting goods equipment.

Prepregs:  HexPly® prepregs are manufactured for sale to third-party customers and for internal use by our Engineered Products segment in manufacturing composite laminates and monolithic structures, including finished components for aircraft structures and interiors.  Prepregs are manufactured by combining high-performance reinforcement fabrics or unidirectional fibers with a resin matrix to form a composite material that, when cured, has exceptional structural properties not present in either of the constituent materials.  Prepreg reinforcements include glass, carbon, aramid, quartz, ceramic and other specialty fibers.  Resin matrices include bismaleimide, cyanate ester, epoxy, phenolic, polyester, polyimide and other specialty resins.

Other Fiber-Reinforced Matrix Materials:  New fiber reinforced matrix developments include HexMC®, a form of quasi-isotropic carbon fiber prepreg that enables small to medium sized composite components to be mass produced.  HexTOOL® is a specialized form of HexMC® for use in the cost-effective construction of high temperature composite tooling.  HexFIT® film infusion material is a product that combines resin films and dry fiber reinforcements to save lay-up time in production and enables the manufacture of large contoured composite structures, such as wind turbine blades.

Resins:  HexFlow® polymer matrix materials are sold in liquid and film form for use in direct process manufacturing of composite parts.  Resins can be combined with fiber reinforcements in manufacturing processes such as resin transfer molding (RTM),

3

resin film infusion (RFI) or vacuum assisted resin transfer molding (VARTM) to produce high quality composite components for both aerospace and industrial applications, without the need for customer investment in autoclaves.

Structural Adhesives:  We manufacture and market a comprehensive range of Reduxâ film and paste adhesives.  These structural adhesives, which bond metal to metal and composites and honeycomb structures, are used in the aerospace industry and for many industrial applications.

Honeycomb:  HexWeb® honeycomb is a lightweight, cellular structure generally composed of a sheet of nested hexagonal cells.  It can also be manufactured in over-expanded and asymmetric cell configurations to meet special design requirements such as contours or complex curvatures.  Honeycomb is primarily used as a lightweight core material and acts as a highly efficient energy absorber.  When sandwiched between composite or metallic facing skins, honeycomb significantly increases the stiffness of the structure, while adding very little weight.

We produce honeycomb from a number of metallic and non-metallic materials.  Most metallic honeycomb is made from aluminum and is available in a selection of alloys, cell sizes and dimensions.  Non-metallic materials used in the manufacture of honeycomb include fiberglass, carbon fiber, thermoplastics, non-flammable aramid papers, aramid fiber and other specialty materials.

We sell honeycomb as standard blocks and in slices cut from a block. Honeycomb is also supplied as sandwich panels, with facing skins bonded to either side of the core material.  Honeycomb is also used in Acousti-Cap® where a non-metallic permeable cap material is embedded into honeycomb core that is used in aircraft engines to dramatically reduce noise during takeoff and landing without adding a structural weight penalty.  Aerospace is the largest market for honeycomb products.  We also sell honeycomb for non-aerospace applications including automotive parts, sporting goods, building panels, high-speed trains and mass transit vehicles, energy absorption products, marine vessel compartments, and other industrial uses.  In addition, we produce honeycomb for our Engineered Products segment for use in manufacturing finished parts for airframe Original Equipment Manufacturers (“OEMs”).

The following table identifies the key customers and the major manufacturing facilities of the Composite Materials segment:

Net sales for the Composite Materials segment to third-party customers were $1,074.5 million in 2011, $904.5 million in 2010, and $856.5 million in 2009, which represented approximately 77%, of our net sales each year.  Net sales for composite materials are highly dependent upon the number of large commercial aircraft produced as further discussed under the captions “Significant Customers”, “Markets” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations”.  In addition, about 5% of our total production of composite materials in 2011 was used internally by the Engineered Products segment.

Engineered Products

The Engineered Products segment manufactures and markets composite structures and precision machined honeycomb parts for use in the aerospace industry. Composite structures are manufactured from a variety of composite and other materials, including prepregs, honeycomb, structural adhesives and advanced molding materials, using such manufacturing processes as autoclave processing, multi-axis numerically controlled machining, heat forming, compression molding and other composite manufacturing techniques.

HexMC® molded composite parts are a new form of cost-effective carbon fiber epoxy molding material that has now become baseline for a large number of primary structures on commercial airplanes. HexMC® enables complex shapes to be manufactured in series production while providing weight savings that are comparable to those achieved with aerospace carbon/epoxy prepregs.

4

The following table identifies the principal products and examples of the primary end-uses from the Engineered Products segment:

Net sales for the Engineered Products segment to third-party customers were $317.9 million in 2011, $269.1 million in 2010, and $251.8 million in 2009, which represented approximately 23% of our net sales each year.

The Engineered Products segment has a 50% ownership interest in a Malaysian joint venture, Asian Composites Manufacturing Sdn. Bhd. (“ACM”) with Boeing Worldwide Operations Limited.  Under the terms of the joint venture agreement, Hexcel and The Boeing Company (“Boeing”) have transferred the manufacture of certain semi-finished composite components to this joint venture.  Hexcel purchases the semi-finished composite components from the joint venture, and inspects and performs additional skilled assembly work before delivering them to Boeing.  The joint venture also manufactures composite components for other aircraft component manufacturers.  ACM had revenue of $51 million, $45 million, and $39 million in 2011, 2010, and 2009, respectively.  For additional information on the Joint Venture investment see Note 5, Investments in Affiliated Companies.

The following table identifies the key customers and the major manufacturing facilities of the Engineered Products segment:

Financial Information About Segments and Geographic Areas

Financial information and further discussion of our segments and geographic areas, including external sales and long-lived assets, are contained under the caption “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and in Note 17 to the accompanying consolidated financial statements of this Annual Report on Form 10-K.

Significant Customers

Approximately 30%, 31% and 27% of our 2011, 2010 and 2009 net sales, respectively, were to Boeing and related subcontractors.  Of the 30% of overall sales to Boeing and its subcontractors in 2011, 25% related to Commercial Aerospace market applications and 5% related to Space & Defense market applications.  Approximately 27%, 24% and 22% of our 2011, 2010 and 2009 net sales, respectively, were to European Aeronautic Defence and Space Company (“EADS”), including its business division Airbus Industrie (“Airbus”), and its subcontractors.  Of the 27% of overall sales to EADS and its subcontractors in 2011, 24% related to Commercial Aerospace market applications and 3% related to Space & Defense market applications.

5

In 2009, Vestas Wind Systems A/S accounted for nearly 12% of the Company’s total net sales.  In 2011 and 2010, their sales were less than 10% of the total net sales for each year.  All of these sales are included in the Composite Materials segment and are in the Industrial market.

Markets

Our products are sold for a broad range of end-uses. The following tables summarize our net sales to third-party customers by market and by geography for each of the three years ended December 31:

(a)          Net sales by geography based on the location in which the product sold was manufactured.

(b)          Net sales to external customers based on the location to which the product sold was delivered.

Commercial Aerospace

The Commercial Aerospace industry is our largest user of advanced composites.  Commercial Aerospace represented 59% of our 2011 net sales. Approximately 82% of these revenues can be identified as sales to Airbus, Boeing and their subcontractors for the production of commercial aircraft.  The remaining 18% of these revenues is for regional and business aircraft.  The economic benefits airlines can obtain from weight savings in both fuel economy and aircraft range, combined with the design enhancement that comes from the advantages of advanced composites over traditional materials, have caused the industry to be the leader in the use of these materials.  While military aircraft and spacecraft have championed the development of these materials, Commercial Aerospace has had the greater consumption requirements and has commercialized the use of these products.  Accordingly, the demand for advanced structural material products is closely correlated to the demand for commercial aircraft.

The use of advanced composites in Commercial Aerospace is primarily in the manufacture of new commercial aircraft.  The aftermarket for these products is very small as many of these materials are designed to last for the life of the aircraft.  The demand for new commercial aircraft is driven by two principal factors, the first of which is airline passenger traffic (the number of revenue passenger miles flown by the airlines) which affects the required size of airline fleets.  The International Air Transport Association (IATA) estimates 2011 revenue passenger miles were 5.9% higher than 2010.  Growth in passenger traffic requires growth in the size of the fleet of commercial aircraft operated by airlines worldwide.

A second factor, which is less sensitive to the general economy, is the replacement rates for existing aircraft.  The rates of retirement of passenger and freight aircraft, resulting mainly from obsolescence, are determined in part by the regulatory requirements established by various civil aviation authorities worldwide as well as public concern regarding aircraft age, safety and noise.  These rates may also be affected by the desire of the various airlines to improve operating costs with higher payloads and more fuel-efficient aircraft (which in turn is influenced by the price of fuel) and by reducing maintenance expense.  In addition, there is expected to be increasing pressure on airlines to replace their aging fleet with more fuel efficient and quieter aircraft to be more environmentally responsible.  When aircraft are retired from commercial airline fleets, they may be converted to cargo freight aircraft or scrapped.

6

An additional factor that may cause airlines to defer or cancel orders is their ability to obtain financing, including leasing, for new aircraft orders.  This will be dependent both upon the financial health of the airline operators, as well as the overall availability of financing in the marketplace.

Each new generation of commercial aircraft has used increasing quantities of advanced composites, replacing metals.  This follows the trend previously seen in military fighter aircraft where advanced composites may now exceed 50% of the weight of the airframe.  Early versions of commercial jet aircraft, such as the Boeing 707, which was developed in the early 1950’s, contained almost no composite materials.  One of the first commercial aircraft to use a meaningful amount of composite materials, the Boeing 767 entered into service in 1983, and was built with an airframe containing approximately 6% composite materials.  The airframe of Boeing’s 777 aircraft, which entered service in 1995, is approximately 11% composite. The Airbus A380, which was first delivered in 2007, has approximately 23% composite content by weight.  Boeing’s latest aircraft, the B787, which entered into service in September 2011, has a content of more than 50% composite materials by weight. In December 2006, Airbus formally launched the A350 XWB (“A350”) which is also projected to have a composite content of 50% or more by weight.  Airbus targets the A350 to enter into service in 2014.  In 2011, both Airbus and Boeing announced new versions of their narrow body aircraft which will have new engines.  Airbus’ A320neo is expected to enter service in 2015 and Boeing’s B737 MAX in 2017.  It is expected that these new aircraft will offer more opportunities for composite materials than their predecessors.  We refer to this steady expansion of the use of composites in aircraft as the “secular penetration of composites” as it increases our average sales per airplane over time.

The impact on Hexcel of Airbus and Boeing’s production rate changes is typically influenced by two factors: the mix of aircraft produced and the inventory supply chain effects of increases or reductions in aircraft production.  We have products on all Airbus and Boeing planes.  The dollar value of our materials varies by aircraft type — twin aisle aircraft use more of our materials than narrow body aircraft and newer designed aircraft use more of our materials than older generations.  On average, for established programs, we deliver products into the supply chain about six months prior to aircraft delivery.  Depending on the product, orders placed with us are received anywhere between one and eighteen months prior to delivery of the aircraft to the customer.  For aircraft that are in the development or ramp-up stage, such as the A350 and the B787, we will have sales as much as a few years in advance of the delivery.  Increased aircraft deliveries combined with the secular penetration of composites resulted in our Commercial Aerospace revenues increasing by approximately 28% in 2011 and 16% in 2010.  In 2009, Commercial Aerospace revenues declined by 22% as our customers adjusted their inventory levels and the regional and business aircraft market declined by more than 40% from 2008.

Set forth below are historical aircraft deliveries as announced by Airbus and Boeing:

Approximately 82% of our Commercial Aerospace revenues can be identified as sales to Airbus, Boeing and their subcontractors for the production of commercial aircraft.  Airbus and Boeing combined deliveries in 2011 were 1,011 aircraft, surpassing the previous high of 979 in 2009.  Based on Airbus and Boeing public estimates, the combined deliveries in 2012 are expected to be over 1,150 planes.  In 2011, the combined orders reported by Airbus and Boeing were for 2,224 planes, bringing their backlog at December 31, 2011 to 8,208 planes.  The balance of our Commercial Aerospace sales is related to regional and business aircraft manufacture, and other commercial aircraft applications. These applications also exhibit increasing utilization of composite materials with each new generation of aircraft.  Regional and business aircraft sales have shown steady recovery over the last several quarters to end 2011 with $150 million in sales, which was about 50% above the trough in late 2009 but down from the $200 million peak in 2008.

Space & Defense

The Space & Defense market has historically been an innovator in the use of, and source of significant demand for, advanced composites.  The aggregate demand by Space & Defense customers is primarily a function of procurement of military aircraft that utilizes advanced composites by the United States and certain European governments.  We are currently qualified to supply materials to a broad range of over 100 helicopter, military aircraft and space programs.  The top ten programs by revenues represent about 50% of our Space & Defense revenues and no one program exceeds 15% of our revenues in this segment.  Key programs include the V-22 (Osprey) tilt rotor aircraft, the Blackhawk, the C-17, the F-35 (joint strike fighter or JSF), F/A-18E/F (Hornet), the European Fighter Aircraft (Typhoon), the NH90, the S76, the Tiger helicopters, and the EADS A400M military transport.  The benefits that we obtain from these programs will depend upon which are funded and the extent of such funding.  Space applications for advanced composites include solid rocket booster cases, fairings and payload doors for launch vehicles, and buss and solar arrays for military and commercial satellites.

7

Another trend providing positive growth for Hexcel is the further penetration of composites in helicopter blades.  Numerous new helicopter programs in development, as well as upgrade or retrofit programs, have an increased reliance on Composite Materials products such as carbon fiber, prepregs, and honeycomb core to improve blade performance.  In addition, our Engineered Products segment provides specialty value added services such as machining, sub-assembly, and even full blade manufacturing.

Contracts for military and some commercial programs may contain provisions applicable to both U.S. Government contracts and subcontracts.  For example, a prime contractor may flow down a “termination for convenience” clause to materials suppliers such as Hexcel.  According to the terms of a contract, we may be subject to U.S. government Federal Acquisition Regulations, the Department of Defense Federal Acquisition Regulations Supplement, Cost Accounting Standards, and associated procurement laws.

Industrial Markets

The revenue for this market segment includes applications for our products outside the Commercial Aerospace and Space & Defense markets. A number of these applications represent emerging opportunities for our products.  In developing new applications, we seek those opportunities where advanced composites technology offer significant benefits to the end user, often applications that demand high engineering performance.  Within this segment, the major end market sub-segments include, in order of size based on our 2011 sales, wind energy, general industrial applications, recreational equipment (e.g., skis and snowboards, bicycles and hockey sticks), and transportation (e.g., automobiles, mass transit and high-speed rail, and marine applications). Our participation in industrial market applications complements our commercial and military aerospace businesses, and we are committed to pursuing the utilization of advanced structural material technology where it can generate significant value and we can maintain a sustainable competitive advantage.

Further discussion of our markets, including certain risks, uncertainties and other factors with respect to “forward-looking statements” about those markets, is contained under the captions “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and “Risk Factors”.

Backlog

In recent years, our customers have demanded shorter order lead times and “just-in-time” delivery performance.  While we have many multi-year contracts with our major aerospace customers, most of these contracts specify the proportion of the customers’ requirements that will be supplied by us and the terms under which the sales will occur, not the specific quantities to be procured.  Our Industrial customers have always desired to order their requirements on as short a lead-time as possible.  As a result, twelve-month order backlog is not a meaningful trend indicator for us.

Raw Materials and Production Activities

Our manufacturing operations are in many cases vertically integrated.  We produce carbon fibers, industrial fabrics, composite materials and composite structures as well as sell these materials to third-party customers for their use in the manufacture of their products.

We manufacture high performance carbon fiber from polyacrylonitrile precursor (“PAN”).  The primary raw material for PAN is acrylonitrile.  All of the PAN we produce is for internal carbon fiber production.  We consume approximately two-thirds by value of the carbon fiber we produce and sell the remainder of our output to third-party customers.  However, as one of the world’s largest consumers of high performance carbon fiber, we also purchase significant quantities of carbon fiber from external sources for our own use.  The sources of carbon fiber we can use in any product or application are sometimes dictated by customer qualifications or certifications.  Otherwise we select a carbon fiber based on performance, price and availability.  With the increasing demand for carbon fiber, particularly in aerospace applications, we have more than doubled our PAN and carbon fiber capacity over the past several years to serve the growing needs of our customers and our own downstream products and we are continuing to expand our capacity to meet our customers’ forecasted requirements. After a new production line starts operating, it can take over a year to be certified for aerospace qualifications.  However, these lines can start supplying carbon fiber for many industrial and recreational applications within a short time period.

8

We purchase glass yarn from a number of suppliers in the United States, Europe and Asia. We also purchase aramid and high strength fibers which are produced by only a few companies, and during periods of high demand, can be in short supply.  In addition, epoxy and other specialty resins, aramid paper and aluminum specialty foils are used in the manufacture of composite products. A number of these products have only one or two sources qualified for use, so an interruption in their supply could disrupt our ability to meet our customer requirements. When entering into multi-year contracts with aerospace customers, we attempt to get back-to-back commitments from key raw material suppliers.

Our manufacturing activities are primarily based on “make-to-order”, or “demand pull” based on customer schedules, and to a lesser extent, “make-to-forecast” production requirements. We coordinate closely with key suppliers in an effort to avoid raw material shortages and excess inventories. However, many of the key raw materials we consume are available from relatively few sources, and in many cases the cost of product qualification makes it impractical to develop multiple sources of supply. The lack of availability of these materials could under certain circumstances have a material adverse effect on our consolidated results of operations.

Research and Technology; Patents and Know-How

Research and Technology (“R&T”) departments support our businesses worldwide. Through R&T activities, we maintain expertise in precursor and carbon fiber, chemical and polymer formulation and curatives, fabric forming and textile architectures, advanced composite structures, process engineering, application development, analysis and testing of composite materials, computational design, and other scientific disciplines related to our worldwide business base.

Our products rely primarily on our expertise in materials science, textiles, process engineering and polymer chemistry.  Consistent with market demand, we have been placing more emphasis on higher performing products and cost effective production processes while seeking to improve the consistency of our products and our capital efficiency.  Towards this end, we have entered into formal and informal alliances, as well as licensing and teaming arrangements, with several customers, suppliers, external agencies and laboratories.  We believe that we possess unique capabilities to design, develop and manufacture composite materials and structures.  We have over 700 patents and pending applications worldwide, and have granted technology licenses and patent rights to several third parties primarily in connection with joint ventures and joint development programs.  It is our policy to actively enforce our proprietary rights. We believe that the patents and know-how rights currently owned or licensed by Hexcel are adequate for the conduct of our business. We do not believe that our business would be materially affected by the expiration of any single patent or series of related patents, or by the termination of any single license agreement or series of related license agreements.

We spent $32.6 million, $30.8 million and $30.1 million for R&T in 2011, 2010 and 2009, respectively.  Our 2011 spending is 5.8% higher than 2010.  Our spending on a quarter to quarter basis fluctuates depending upon the amount of new product development and qualification activities, particularly in relation to commercial aircraft applications, that are in progress.  These expenditures are expensed as incurred.

Environmental Matters

We are subject to federal, state, local and foreign laws and regulations designed to protect the environment and to regulate the discharge of materials into the environment.  We believe that our policies, practices, and procedures are properly designed to prevent unreasonable risk of environmental damage and associated financial liability.  To date, environmental control regulations have not had a significant adverse effect on our overall operations.

Our aggregate environmental related accruals at December 31, 2011 and 2010 were $5.0 million and $7.3 million, respectively.  As of December 31, 2011 and December 31, 2010, $3.3 million and $4.2 million, respectively, were included in “Other current accrued liabilities”, with the remainder included in “Other non-current liabilities”.  As related to certain of our environmental matters, our accruals were estimated at the low end of a range of possible outcomes since there was no better point within the range.  If we had accrued for these matters at the high end of the range of possible outcomes, our accruals would have been $6.8 million and $8.8 million at December 31, 2011 and 2010, respectively.  Environmental remediation spending charged directly to our reserve balance for 2011, 2010 and 2009, was $5.7 million, $4.8 million and $2.8 million, respectively.  In addition, our operating costs relating to environmental compliance were $10.3 million, $9.5 million and $10.0 million, for 2011, 2010, and 2009, respectively, and were charged directly to expense.  Capital expenditures for environmental matters approximated $4.1 million, $1.7 million and $4.8 million for 2011, 2010 and 2009 respectively.

These accruals can change significantly from period to period due to such factors as additional information on the nature or extent of contamination, the methods of remediation required, changes in the apportionment of costs among responsible parties and other actions by governmental agencies or private parties, as well as the impact, if any, of Hexcel being named in a new matter.  A discussion of environmental matters is contained in Item 3, “Legal Proceedings,” and in Note 14 to the accompanying consolidated financial statements included in this Annual Report on Form 10-K.

9

Sales and Marketing

A staff of salaried market managers, product managers and sales personnel sell and market our products directly to customers worldwide.  We also use independent distributors and manufacturer representatives for certain products, markets and regions.  In addition, we operate various sales representation offices in the Americas, Europe, Asia Pacific and Russia.

Competition

In the production and sale of advanced composites, we compete with a number of U.S. and international companies on a worldwide basis.  The broad markets for composites are highly competitive, and we have focused on both specific submarkets and specialty products within markets.  In addition to competing directly with companies offering similar products, we compete with producers of substitute composites such as structural foam, infusion technology, wood and metal.  Depending upon the material and markets, relevant competitive factors include approvals, database of usage, technology, product performance, delivery, service, price and customer preference for sole sourcing.

Employees

As of December 31, 2011, we employed 4,508 full-time employees and contract workers, 2,584 in the United States and 1,924 in other countries.  Of the 4,508 full-time employees, less than 17% were represented by collective bargaining agreements.  We believe that our relations with employees and unions are good.  The number of full-time employees and contract workers as of December 31, 2010 and 2009 was 4,043 and 3,734, respectively.

Other Information

Our internet website is www.hexcel.com. We make available, free of charge through our website, our Form 10-Ks, 10-Qs and 8-Ks, and any amendments to these forms, as soon as reasonably practicable after filing with the Securities and Exchange Commission.

ITEM 1A. Risk Factors

An investment in our common stock or debt securities involves risks and uncertainties.  You should consider the following risk factors carefully, in addition to the other information contained in this Annual Report on Form 10-K, before deciding to purchase any of our securities.

The markets in which we operate can be cyclical, and downturns in them may adversely affect the results of our operations.

Some of the markets in which we operate have been, to varying degrees, cyclical and have experienced downturns.  A downturn in these markets could occur at any time as a result of events that are industry specific or macroeconomic and in the event of a downturn, we have no way of knowing if, when and to what extent there might be a recovery.  Any deterioration in any of the cyclical markets we serve could adversely affect our financial performance and operating results.

At December 31, 2011, Airbus and Boeing had a combined backlog of 8,208 aircraft, which is about eight years of production at current delivery rates.  To the extent any significant deferrals, cancellations or reduction in demand results in decreased aircraft build rates, it would reduce net sales for our Commercial Aerospace products and as a result reduce our operating income.  Approximately 59% of our net sales for 2011 were derived from sales to the Commercial Aerospace industry, which includes 82% from Airbus and Boeing aircraft and 18% from regional and business aircraft.  Reductions in demand for commercial aircraft or a delay in deliveries could result from many factors, including terrorist events and any subsequent military response, changes in the propensity for the general public to travel by air, a rise in the cost of aviation fuel, a change in technology resulting in the use of alternative materials, consolidation and liquidation of airlines, availability of funding for new aircraft purchases or leases, inventory corrections or disruptions throughout the supply chain and slower macroeconomic growth.  Both Airbus and Boeing have experienced various delays in their newest aircraft programs, including the A380, B787, B747-8, A400M, and A350.  These delays have delayed and may continue to delay our expected growth or our effective utilization of capacity installed for such growth.  Future delays in these or other major new customer programs could similarly impact our results.

In addition, our customers continue to emphasize the need for cost reduction or other improvements in contract terms throughout the supply chain.  In response to these pressures, we may be required to accept increased risk or face the prospects of margin compression on some products in the future. Where possible, we seek to offset or mitigate the impact of such pressures through productivity and performance improvements, index clauses, currency hedging and other actions.

10

A significant decline in business with Boeing, EADS, Vestas, or other significant customers could materially impact our business, operating results, prospects and financial condition.

We have concentrated customers in the Commercial Aerospace and wind energy markets.  In the Commercial Aerospace market, approximately 82%, and in the Space & Defense market, approximately 35%, of our 2011 net sales were made to Boeing and EADS (including Airbus) and their related subcontractors.  For the years ended December 31, 2011 and December 31, 2010, approximately 29% and 31% of our total consolidated net sales were to Boeing and its related subcontractors, respectively, and approximately 28% and 24% of our total consolidated net sales, respectively, were to EADS, including Airbus and its related subcontractors.  In the wind energy market, our primary customer is Vestas Wind Systems A/S.  Significant changes in the demand for our customers’ end products, the share of their requirements that is awarded to us or changes in the design or materials used to construct their products could result in a significant loss of business with these customers.  The loss of, or significant reduction in purchases by, Boeing, EADS and Vestas or any of our other significant customers could materially impair our business, operating results, prospects and financial condition.  The level of purchases by our customers is often affected by events beyond their control, including general economic conditions, demand for their products, business disruptions, disruptions in deliveries, strikes and other factors.

Reductions in space and defense spending could result in a decline in our net sales.

The growth in military aircraft production that has occurred in recent years may not be sustained, individual programs important to Hexcel may be cancelled, production may not continue to grow and the increased demand for replacement helicopter blades may not continue. The production of military aircraft depends upon defense budgets and the related demand for defense and related equipment. Approximately 23% of our net sales in 2011 were derived from space and defense industries.

A decrease in supply, interruptions at key facilities or an increase in cost of raw materials could result in a material decline in our profitability.

Our profitability depends largely on the price and continuity of supply of raw materials, which may be supplied through a sole source or a limited number of sources.  We purchase large volumes of raw materials, such as epoxy and phenolic resins, carbon fiber, fiberglass yarn, aluminum foil and aramid paper.  Any restrictions on the supply, or an increase in the cost, of our raw materials could significantly reduce our profit margins.  Efforts to mitigate restrictions on the supply or price increases of these raw materials by long-term purchase agreements, productivity improvements or by passing cost increases to our customers may not be successful.

The occurrence of material operational problems, including but not limited to failure of, or interruption to, key equipment or natural disasters, may have a material adverse effect on the productivity and profitability of a particular manufacturing facility. With respect to certain facilities, such events could have a material effect on our company as a whole.

We have substantial international operations subject to uncertainties which could affect our operating results.

We believe that revenue from sales outside the U.S. will continue to account for a material portion of our total revenue for the foreseeable future.  In 2011, 48% of our production and 56% of our customer sales occurred outside of the United States.  Additionally, we have invested significant resources in our international operations and we intend to continue to make such investments in the future. Our international operations are subject to numerous risks, including: (a) general economic and political conditions in the countries where we operate may have an adverse effect on our operations in those countries or not be favorable to our growth strategy; (b) the difficulty of enforcing agreements and collecting receivables through some foreign legal systems; (c) foreign customers may have longer payment cycles than customers in the U.S.; (d) cost of compliance with international trade laws of all of the countries in which we do business, including export control laws, relating to sales and purchases of goods and equipment and transfers of technology; (e) tax rates in some foreign countries may exceed those of the U.S. and foreign earnings may be subject to withholding requirements or the imposition of tariffs, exchange controls or other restrictions; governments may adopt regulations or take other actions that would have a direct or indirect adverse impact on our business and market opportunities; and (f) the potential difficulty in enforcing our intellectual property rights in some foreign countries, and the potential for the intellectual property rights of others to affect our ability to sell product in certain markets.  Any one of these could adversely affect our financial condition and results of operations.

In addition, fluctuations in currency exchange rates may influence the profitability and cash flows of our business.  For example, our European operations sell a portion of the products they produce in U.S. dollars, yet the labor, overhead costs and portions of material costs incurred in the manufacture of those products are denominated in Euros, British pounds sterling or U.S. dollars. As a result, the local currency margins of goods manufactured with costs denominated in local currency, yet sold in U.S. dollars, will vary with fluctuations in currency exchange rates, reducing when the U.S. dollar weakens against the Euro and British pound sterling. In addition, the reported U.S. dollar value of the local currency financial statements of our foreign subsidiaries will vary with fluctuations in currency exchange rates. While we enter into currency exchange and hedge agreements from time to time to mitigate these types of

11

fluctuations, we cannot remove all fluctuations or hedge all exposures, and our earnings are impacted by changes in currency exchange rates.

We currently do not have political risk insurance in the countries in which we conduct business. While we carefully consider these risks when evaluating our international operations we cannot provide assurance that we will not be materially adversely affected as a result of such risks.

We could be adversely affected by environmental and safety requirements.

Our operations require the handling, use, storage and disposal of certain regulated materials and wastes. As a result, we are subject to various laws and regulations pertaining to pollution and protection of the environment, health and safety.  These requirements govern, among other things, emissions to air, discharge to waters and the generation, handling, storage, treatment and disposal of waste and remediation of contaminated sites.  We have made, and will continue to make, capital and other expenditures in order to comply with these laws and regulations.  These laws and regulations are complex, change frequently and could become more stringent in the future.

We have been named as a “potentially responsible party” under the U.S. Superfund law or similar state laws at several sites requiring clean up. These laws generally impose liability for costs to investigate and remediate contamination without regard to fault. Under certain circumstances liability may be joint and several, resulting in one responsible party being held responsible for the entire obligation.  Liability may also include damages to natural resources.  We have incurred and likely will continue to incur expenses to investigate and clean up certain of our existing and former facilities, for which we believe we have adequate reserves.  The ongoing operation of our manufacturing plants also entails environmental risks, and we may incur material costs or liabilities in the future which could adversely affect us. Although most of our properties have been the subject of environmental site assessments, there can be no assurance that all potential instances of soil and groundwater contamination have been identified, even at those sites where assessments have been conducted. Accordingly, we may discover previously unknown environmental conditions and the cost of remediating such conditions may be material.  See “Legal Proceedings” below and Note 14 to the consolidated financial statements included elsewhere in this Annual Report on Form 10-K.

In addition, we may be required to comply with evolving environmental, health and safety laws, regulations or requirements that may be adopted or imposed in the future or to address newly discovered information or conditions that require a response. In particular, climate change is receiving increased attention worldwide, which has led to significant legislative and regulatory efforts to limit greenhouse gas emissions.  The U.S. Congress is currently considering climate change-related legislation which may include cap and trade provisions or a carbon tax. The European Union has instituted the Greenhouse Gas Emission Trading System (EU-ETS). Our manufacturing plants use energy, including electricity and natural gas, and certain of our plants emit amounts of greenhouse gas that may be affected by these legislative and regulatory efforts.  It is difficult at this time to estimate the likelihood of passage, or predict the potential impact, of any additional legislation. Potential consequences could include increased energy, transportation and raw material costs and may require the Company to make additional investments in its facilities and equipment or limit our ability to grow.

Our forward-looking statements and projections may turn out to be inaccurate.

This Form 10-K includes forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995.  These statements relate to analyses and other information that are based on forecasts of future results and estimates of amounts not yet determinable.  These statements also relate to future prospects, developments and business strategies.  These forward-looking statements are identified by their use of terms and phrases such as “anticipate”, “believe”, “could”, “estimate”, “expect”, “intend”, “may”, “plan”, “predict”, “project”, “should”, “would”, “will” and similar terms and phrases, including references to assumptions.  Such statements are based on current expectations, are inherently uncertain, and are subject to changing assumptions.

Such forward-looking statements include, but are not limited to: (a) the estimates and expectations based on aircraft production rates made publicly available by Airbus and Boeing; (b) the revenues we may generate from an aircraft model or program; (c)  the impact of the possible push-out in deliveries of the Airbus and Boeing backlog and the impact of delays in new aircraft programs or the final Hexcel composite material content once the design and material selection has been completed; (d) expectations of composite content on new commercial aircraft programs and our share of those requirements; (e) expectations of growth in revenues from space and defense applications, including whether certain programs might be curtailed or discontinued; (f) expectations regarding growth in sales for wind energy, recreation and other industrial applications; (g) expectations regarding working capital trends and expenditures; (h) expectations as to the level of capital expenditures and when we will complete the construction and qualification of

12

capacity expansions; (i) our ability to maintain and improve margins in light of the ramp-up of capacity and new facilities and the current economic environment; (j) the outcome of legal matters; (k) our projections regarding the realizability of net operating loss and tax credit carryforwards; and (l) the impact of various market risks, including fluctuations in interest rates, currency exchange rates, environmental regulations and tax codes, fluctuations in commodity prices, and fluctuations in the market price of our common stock and the impact of the above factors on our expectations of 2012 financial results.  In addition, actual results may differ materially from the results anticipated in the forward looking statements due to a variety of factors, including but not limited to changing market conditions, increased competition, product mix, inability to achieve planned manufacturing improvements, cost reductions and capacity additions, and conditions in the financial markets.

Such forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause actual results to be materially different. Such factors include, but are not limited to, the following: changes in general economic and business conditions; changes in current pricing and cost levels; changes in political, social and economic conditions and local regulations, particularly in Asia and Europe; foreign currency fluctuations; changes in aerospace delivery rates; reductions in sales to any significant customers, particularly Airbus, Boeing or Vestas; changes in sales mix; changes in government defense procurement budgets; changes in military aerospace programs technology; industry capacity; competition; disruptions of established supply channels, particularly where raw materials are obtained from a single or limited number of sources and cannot be substituted by unqualified alternatives; manufacturing capacity constraints; and the availability, terms and deployment of capital.

If one or more of these risks or uncertainties materialize, or if underlying assumptions prove incorrect, actual results may vary materially from those expected, estimated or projected.  In addition to other factors that affect our operating results and financial position, neither past financial performance nor our expectations should be considered reliable indicators of future performance.  Investors should not use historical trends to anticipate results or trends in future periods.  Further, our stock price is subject to volatility.  Any of the factors discussed above could have an adverse impact on our stock price.  In addition, failure of sales or income in any quarter to meet the investment community’s expectations, as well as broader market trends, can have an adverse impact on our stock price.  We do not undertake an obligation to update our forward-looking statements or risk factors to reflect future events or circumstances.

ITEM 1B. Unresolved Staff Comments

None.

ITEM 2. Properties

We own and lease manufacturing facilities and sales offices located throughout the United States and in other countries, as noted below. The corporate offices and principal corporate support activities are located in leased facilities in Stamford, Connecticut. Our research and technology administration and principal laboratories are located in Dublin, California; Duxford, United Kingdom; Les Avenieres, France; and Decatur, Alabama.

13

The following table lists our manufacturing facilities by geographic location, related segment, and principal products manufactured. This table does not include the manufacturing facility owned by ACM.

Manufacturing Facilities

We lease the land and buildings in Nantes, France; Stade, Germany and Tianjin, China; and the land on which the Burlington, Washington facility is located.  We also lease portions of the facilities located in Casa Grande, Arizona and Les Avenieres, France.  We own all other remaining facilities.  In connection with our credit facility, we have granted mortgages on the facilities located in Casa Grande, Arizona; Decatur, Alabama; Dublin, California; Kent, Washington; Salt Lake City, Utah and Seguin, Texas.  For further information, refer to “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and to Note 7 to the accompanying consolidated financial statements of this Annual Report on Form 10-K.

ITEM 3. Legal Proceedings

We are involved in litigation, investigations and claims arising out of the normal conduct of our business, including those relating to commercial transactions, environmental, employment, and health and safety matters.  We estimate and accrue our liabilities resulting from such matters based on a variety of factors, including the stage of the proceeding; potential settlement value; assessments by internal and external counsel; and assessments by environmental engineers and consultants of potential environmental liabilities and remediation costs.  Such estimates are not discounted to reflect the time value of money due to the uncertainty in estimating the timing of the expenditures, which may extend over several years.

While it is impossible to ascertain the ultimate legal and financial liability with respect to certain contingent liabilities and claims, we believe, based upon our examination of currently available information, our experience to date, and advice from legal counsel, that the individual and aggregate liabilities resulting from the ultimate resolution of these contingent matters, after taking into consideration our existing insurance coverage and amounts already provided for, will not have a material adverse impact on our consolidated results of operations, financial position or cash flows.

Environmental Matters

We are subject to various U.S. and international federal, state and local environmental, and health and safety laws and regulations.  We are also subject to liabilities arising under the Federal Comprehensive Environmental Response, Compensation and Liability Act (“CERCLA” or “Superfund”), the Clean Air Act, the Clean Water Act, the Resource Conservation and Recovery Act, and similar state and international laws and regulations that impose responsibility for the control, remediation and abatement of air, water and soil pollutants and the manufacturing, storage, handling and disposal of hazardous substances and waste.

14

We have been named as a potentially responsible party (“PRP”) with respect to several hazardous waste disposal sites that we do not own or possess, which are included on, or proposed to be included on, the Superfund National Priority List of the U.S. Environmental Protection Agency (“EPA”) or on equivalent lists of various state governments.  Because CERCLA allows for joint and several liability in certain circumstances, we could be responsible for all remediation costs at such sites, even if we are one of many PRPs.  We believe, based on the amount and nature of our waste, and the number of other financially viable PRPs, that our liability in connection with such matters will not be material.

Lodi, New Jersey Site

Pursuant to the New Jersey Industrial Site Recovery Act, Hexcel entered into an Administrative Consent Order for the environmental remediation of a manufacturing facility we own and formerly operated in Lodi, New Jersey.  We have been remediating this site in accordance with an approved plan.  In the first quarter of 2010, we implemented new technology to enhance the remediation system to accelerate completion of the remediation.  We had expected to substantially complete the remediation by the end of 2011, but severe regional flooding, most recently from hurricane Irene, extended the completion date to the first half of 2012 and increased the remediation costs.  Consequently, in 2011, we accrued an additional $2.5 million related to this extended remediation which increased the accrual to $2.8 million at December 30, 2011.

Lower Passaic River Study Area

In October 2003, we received, along with 66 other entities, a directive from the New Jersey Department of Environmental Protection (“NJDEP”) that requires the entities to assess whether operations at various New Jersey sites, including our former manufacturing site in Lodi, New Jersey, caused damage to natural resources in the Lower Passaic River watershed.  In May 2005, the NJDEP dismissed us from the Directive.  In February 2004, 42 entities including Hexcel, received a general notice letter from the EPA which requested that the entities consider helping to finance an estimated $10 million towards an EPA study of environmental conditions in the Lower Passaic River watershed.  In May 2005, we signed into an agreement with the EPA to participate (bringing the total number of participating entities to 43) in financing such a study up to $10 million, in the aggregate.  Since May 2005, a number of additional PRPs have joined into the agreement with the EPA.  In October 2005, we along with the other EPA notice recipients were advised by the EPA that the notice recipients’ share of the costs of the EPA study was expected to significantly exceed the earlier EPA estimate.  While we and the other recipients were not obligated by our agreement to share in such excess, a Group of notice recipients (73 companies including Hexcel) negotiated an agreement with the EPA to assume responsibility for the study pursuant to an Administrative Order on Consent.  We believe we have viable defenses to the EPA claims and expect that other as yet unnamed parties will also receive notices from the EPA.  In June 2007, the EPA issued a draft Focused Feasibility Study (“FFS”) that considers interim remedial options for the lower eight miles of the river, in addition to a “no action” option.  The estimated costs for the six options ranged from $900 million to $2.3 billion.  The PRP Group provided comments to the EPA on the FFS; the EPA has not yet taken further action.  The Administrative Order on Consent regarding the study does not cover work contemplated by the FFS.  Furthermore, the Federal Trustee for natural resources have indicated their intent to perform a natural resources damage assessment on the river and invited the PRPs to participate in the development and performance of this assessment.  The PRP Group, including Hexcel, has not agreed to participate in the assessment at this time.  Finally, on February 4, 2009, Tierra Solutions (“Tierra”) and Maxus Energy Corporation (“Maxus”) filed a third party complaint in New Jersey Superior Court against us and over 300 other entities in an action brought against Tierra and Maxus (and other entities) by the State of New Jersey.  New Jersey’s suit against Tierra and Maxus relates to alleged discharges of contaminants by Tierra and Maxus to the Passaic River and seeks payment of all past and future costs the State has and will incur regarding cleanup and removal of contaminants, investigation of the Passaic River and related water bodies, assessment of natural resource injuries and other specified injuries.  The third party complaint seeks contribution from us for all or part of the damages that Tierra and Maxus may owe to the State.  We filed our answer to the complaint and served our initial disclosures, and have produced initial documents to Tierra and Maxus, pursuant to an order of the court.  We expect additional discovery and litigation activities to occur during 2012.  The court has issued a trial plan that contemplates a liability trial for third-party defendants (including Hexcel) in April 2013, with additional proceedings if necessary to allocate costs between third-party defendants in January 2014.  Our ultimate liability for investigatory costs, remedial costs and/or natural resource damages in connection with the Lower Passaic River cannot be determined at this time.

Kent, Washington Site

We were party to a cost-sharing agreement regarding the operation of certain environmental remediation systems necessary to satisfy a post-closure care permit issued to a previous owner of our Kent, Washington site by the EPA.  Under the terms of the cost-sharing agreement, we were obligated to reimburse the previous owner for a portion of the cost of the required remediation activities.  Management has determined that the cost-sharing agreement terminated in December 1998; however, the other party disputes this determination.  The Washington Department of Ecology (“Ecology”) has issued a unilateral Enforcement Order to us requiring us to (a) maintain the interim remedial system and to perform system separation, (b) to conduct a focused remedial investigation and (c) to conduct a focused feasibility study to develop recommended long term remedial measures.  We asserted defenses against performance

15

of the order, particularly objecting to the remediation plan proposed by the previous owner, who still owns the adjacent contaminated site.  However, we are currently complying with the order, with one exception, without withdrawing our defenses.  As a result of a dispute resolution procedure, Hexcel and Ecology have reached an agreement to modify certain work requirements and to extend certain deadlines, and we are in full compliance with the order as modified  The total accrued liability related to this matter was $1.4 million at December 31, 2011.

Omega Chemical Corporation Superfund Site, Whittier, CA

We are a PRP at a former chemical waste site in Whittier, CA.  The PRPs at Omega have established a PRP Group, the “Omega Group”, and are currently investigating and remediating soil and groundwater at the site pursuant to a Consent Decree with the EPA.  Hexcel contributed approximately 1.07% of the waste tonnage sent to the site during its operations.  In addition to the Omega site specifically, the EPA is investigating the scope of regional groundwater contamination in the vicinity of the Omega site and recently issued a Record of Decision; the Omega PRP Group members have been noticed by the EPA as PRP’s who will be required to be involved in the remediation of the regional groundwater contamination in that vicinity as well.  As a member of the Omega PRP group, Hexcel will likely incur costs associated with the investigation and remediation of the Omega site, but our ultimate liability, if any, in connection with this matter cannot be determined at this time.

Environmental remediation reserve activity for the three years ended December 31, 2011 was as follows:

Environmental Summary

Our estimate of liability as a PRP and our remaining costs associated with our responsibility to remediate the Lodi, New Jersey; Kent, Washington; and other sites are accrued in the consolidated balance sheets. As of December 31, 2011 and 2010, our aggregate environmental related accruals were $5.0 million and $7.3 million, respectively. As of December 31, 2011 and 2010, $3.3 million and $4.2 million, respectively, were included in current other accrued liabilities, with the remainder included in other non-current liabilities.  As related to certain environmental matters, the accruals were estimated at the low end of a range of possible outcomes since no amount within the range is a better estimate than any other amount.  If we had accrued for these matters at the high end of the range of possible outcomes, our accrual would have been $6.8 million and $8.8 million at December 31, 2011 and 2010, respectively.

These accruals can change significantly from period to period due to such factors as additional information on the nature or extent of contamination, the methods of remediation required, changes in the apportionment of costs among responsible parties and other actions by governmental agencies or private parties, or the impact, if any, of being named in a new matter.

Environmental remediation spending charged directly to our reserve balance was $5.7 million and $4.8 million for the years ended December 31, 2011 and 2010, respectively.  In addition, our operating costs relating to environmental compliance charged directly to expense were $10.3 million and $9.5 million for the years ended December 31, 2011 and 2010.  Capital expenditures for environmental matters were $4.1 million and $1.7 million for the years ended December 31, 2011 and 2010, respectively.

ITEM 4. Mine Safety Disclosure

Not applicable.

PART II

ITEM 5. Market for Registrant’s Common Equity and Related Stockholder Matters

Hexcel common stock is traded on the New York Stock Exchange.  The range of high and low sales prices of our common stock on the New York Stock Exchange is contained in Note 22 to the accompanying consolidated financial statements of this Annual Report on Form 10-K and is incorporated herein by reference.

16

Hexcel did not declare or pay any dividends in 2011, 2010 or 2009.  The payment of dividends is limited under the terms of certain of our debt agreements. Hexcel does not intend to pay dividends in the foreseeable future, as cash generated from operations will be used primarily to support capital expenditures or pay down debt.

On February 2, 2012 there were 989 holders of record of our common stock.

The following chart provides information regarding repurchases of Hexcel common stock:

(1) All Shares were delivered by employees in payment of the exercise price of non-qualified stock options.

ITEM 6. Selected Financial Data

The information required by Item 6 is contained on page 25 of this Annual Report on Form 10-K under the caption “Selected Financial Data” and is incorporated herein by reference.

ITEM 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

The information required by Item 7 is contained on pages 26 to 36 of this Annual Report on Form 10-K under “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and is incorporated herein by reference.

ITEM 7A. Quantitative and Qualitative Disclosures about Market Risk

The information required by Item 7A is contained under the heading “Market Risks” on pages 36 to 38 of this Annual Report on Form 10-K and is incorporated herein by reference.

ITEM 8. Financial Statements and Supplementary Data

The information required by Item 8 is contained on pages 43 to 73 of this Annual Report on Form 10-K under “Consolidated Financial Statements and Supplementary Data” and is incorporated herein by reference. The Report of Independent Registered Public Accounting Firm is contained on page 42 of this Annual Report on Form 10-K under the caption “Report of Independent Registered Public Accounting Firm” and is incorporated herein by reference.

ITEM 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

None.

ITEM 9A. Controls and Procedures

Our Chief Executive Officer and Chief Financial Officer have evaluated our disclosure controls and procedures as of December 31, 2011 and have concluded that these disclosure controls and procedures are effective to ensure that information required to be disclosed by us in the reports that we file or submit under the Securities Exchange Act of 1934 is recorded, processed,

17

summarized and reported within the time periods specified in the SEC’s rules and forms.  These disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by us in the reports we file or submit is accumulated and communicated to management, including the Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.

Our Chief Executive Officer and Chief Financial Officer have concluded that there have not been any changes in our internal control over financial reporting during the fourth quarter that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

Management’s report on our internal control over financial reporting is contained on page 41 of this Annual Report on Form 10-K and is incorporated herein by reference.

ITEM 9B. Other Information

None.

PART III

ITEM 10.  Directors, Executive Officers and Corporate Governance

The information required by Item 10 will be contained in our definitive proxy statement for the 2012 Annual Meeting of Stockholders, which will be filed with the Securities and Exchange Commission within 120 days after the close of the fiscal year ended December 31, 2011.  Such information is incorporated herein by reference.

ITEM 11.  Executive Compensation

The information required by Item 11 will be contained in our definitive proxy statement for the 2012 Annual Meeting of Stockholders, which will be filed with the Securities and Exchange Commission within 120 days after the close of the fiscal year ended December 31, 2011.  Such information is incorporated herein by reference.

ITEM 12.  Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

The information required by Item 12 will be contained in our definitive proxy statement for the 2012 Annual Meeting of Stockholders, which will be filed with the Securities and Exchange Commission within 120 days after the close of the fiscal year ended December 31, 2011.  Such information is incorporated herein by reference.

ITEM 13.  Certain Relationships and Related Transactions, and Director Independence

The information required by Item 13 will be contained in our definitive proxy statement for the 2012 Annual Meeting of Stockholders, which will be filed with the Securities and Exchange Commission within 120 days after the close of the fiscal year ended December 31, 2011.  Such information is incorporated herein by reference.

ITEM 14.  Principal Accountant Fees and Services

The information required by Item 14 will be contained in our definitive proxy statement for the 2012 Annual Meeting of Stockholders, which will be filed with the Securities and Exchange Commission within 120 days after the close of the fiscal year ended December 31, 2011.  Such information is incorporated herein by reference.

PART IV

ITEM 15.  Exhibits and Financial Statement Schedules

(a)  Financial Statements, Financial Statement Schedules and Exhibits

18

19

20

21

22

* Indicates management contract or compensatory plan or arrangement.

23

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

KNOWN TO ALL PERSONS BY THESE PRESENTS, that each person whose signature appears below constitutes and appoints each of David E. Berges, Wayne C. Pensky and Ira J. Krakower, individually, his attorney-in-fact, with the power of substitution, for him in any and all capacities, to sign any amendments to this report, and to file the same, with exhibits thereto and other documents in connection therewith, with the Securities and Exchange Commission, hereby ratifying and confirming all that each said attorney-in-fact, or his substitute or substitutes, may do or cause to be done by virtue hereof.

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities and on the dates indicated.

24

Selected Financial Data

The following table summarizes selected financial data as of and for the five years ended December 31: